• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.36-45
• /
• 2024

This study was to investigate the effect of manufacturing an avocado oil-added formulation and applying it to damaged hair. The experimental materials were prepared by adding avocado oil contents of 0 g, 3 g, 6 g, and 9 g to the perm base agent. It was applied to 4 damaged hair samples with the prepared formulation for comparative analysis. Tensile strength, absorbance using methylene blue, and gloss were measured as measurement methods for the effect on damaged hair. Statistical analysis was performed for the reliability of the research results. As a result of the tensile strength measurement, it was found that the tensile strength of the sample applied with the formulation containing 6 g and 9 g to the sample increased, affecting damaged hair. As a result of the absorbance analysis using methylene blue, it was found that the absorbance of all samples applied by adding oil decreased, affecting damaged hair. The gloss measurement result was found to affect damaged hair when 6 g and 9 g were added. The conclusion is that avocado oil affects damaged hair, so it is thought that it will have an effect of improving hair.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.4
• /
• pp.447-453
• /
• 1986

To diagnose the typhoid fever rapidly and accurately in clinically suspected patients, the levels of IgG subclass antibody were measured by enzyme-linked immunosorbent assay(ELISA). With symptom, blood culture and agglutination test, tested persons were categorized into 6 groups as typhoid fever, FUO, paratyphi A or B, other bacterial infctions, cancers, and control. ELISA was performed on the polyvinyl chloride plates coated with killed whole cell($10^8\;cell/ml$) of S. typhi 0901W by poly-L-lysine applied as binding substance (and polyvinyl chloride as solid phase). The distribution of the level of IgG subclass antibodies in each group was analyzed and compared with other groups. The results obtained were summarized as follow: 1. The optimal dilution of the sera from patients with typhoid fever was 1:160, and those of the sheep anti-human IgG subclass and the peroxidase conjugated rabbit anti-sheep IgG were 1:4000 and 1:5000, respectively. 2. The absorbance levels of IgG subclass in the sera of typhoid fever patients were as follows; a) IgG1 value is $0.439{\pm}0.110$ b) IgG2 value is $0.416{\pm}0.165$ c) IgG3 value is $0.449{\pm}0.145$ d) IgG4 value is $0.525{\pm}0.154$ IgG subclass levels in the sera of typhoid patients were much higher than in control group and patient with paratyphi A or B as well as other infectious diseases. The sensitivity and the specificity in differential diagnosis of typhoid fever and other febrile diseases were 92% and 79% in the assay of IgG1 respectively, whereas those in the assay of IgG2 were 97% and 72%, respectively (above absorbance 0.3). 3. The absorbance levels of IgG subclass in the serial sera of typhiod fever patients tend to decrease to the level of absorbance 0.3 in 10 months from the onset of illness. 4. The order of absorbance levels of IgG subclass in the serum of each group were typhoid fever, paratyphi A or B, other infectious diseases, control and cancer. 5. For the serodiagnosis of typhoid fever against other febrile diseases, the sensitivity and the specificity in the assay of IgG2 activity were 76% and 93% in absorbance 0.4, respectively. 6. In the distribution of the level of each IgG subclass in the sera of FUO patients which were suspected of typhoid fever, the positive rate was ranged from 36% to 82%. This suggest that more than 50% of FUO patients are caused by S. typhi.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.478-484
• /
• 2012

This study was carried out to investigate the plant growth and ion absorbance balance of various native plants affected by the NaCl concentration (0, 100, 200, 300 mM). Carex blepharicarpa, Carex lenta, Carex matsumarae, Carex sendaica, Iris pseudacorus L., Sedum oryzifolium Makino, Sedum polytrichoides Hemsl., and Typha angustifolia L. were used in this experiment. Carex blepharicarpa, Carex lenta, Carex matsumarae, and Iris pseudacorus L. were tolerant of salinity at the NaCl concentration of 200 mM. The root growth of Carex sendaica and Typha angustifolia L. was suppressed at the NaCl concentration of 100 mM, expecially the root growth responded more sensitively than the upper growth to salinity. The K absorbance of Carex sendaica decreased according to the NaCl application, and the Na/K rate value was 3 at the NaCl concentration of 300 mM. The K, Ca, and Mg absorbance of Typha angustifolia L. decreased at the NaCl concentration of 200~300 mM, and the Na/K rate value was 0.8 at the NaCl concentration of 300 mM. The plant growth of Sedum oryzifolium Makino and Sedum polytrichoides Hemsl. was suppressed at the NaCl concentration of 100~200 mM. The K, Ca, and Mg absorbance of Sedum oryzifolium Makino decreased at the NaCl concentration of 200~300 mM, and Sedum polytrichoides Hemsl. was unaffected by the NaCl application. The Na/K value was 1 in both plants. Therefore, Carex blepharicarpa, Carex lenta, Carex matsumarae, and Iris pseudacorus L. were tolerant plants of salinity at the NaCl concentration of 200 mM considering the plant growth and ion absorbance balance. Especially, the Carex plants were expected to expanding use by the proven tolerance of salinity. The root growth of Carex sendaica, Sedum oryzifolium Makino, Sedum polytrichoides Hemsl., and Typha angustifolia L., was suppressed at the NaCl concentration of 100 mM, but there was no distinct tendency of ion absorbance in leaves according to the NaCl application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.3
• /
• pp.152-158
• /
• 2009

Various fabrication methods have been used to synthesize sapphire which has qualities of jewelry well beyond the industrial class. Among them, the flux sapphire of Chatham Company which has as high value as jewelry was selected in order to compare natural and synthetic sapphire. First, the WD-XRF (Wavelength dispersive x-ray fluorescence spectrometer) was used to analyze the chemical composition of natural and synthetic sapphire. Although natural sapphire had very diverse chemical compositions, flux sapphire had small quantities of Mo, Pt and Pb elements in addition to the similar chemical ingredients to natural one. Pt is decisive proof of flux sapphire. Next, by investigating spectroscopic characteristics using UV-VIS Spectrophotometer after heat treatment at high temperatures of $1300^{\circ}C$ and $1500^{\circ}C$, the variation of 690 nm absorbance related to $Cr^{3+}$ was detected in the natural sapphire while those of the 690 nm absorbance (related to $Cr^{3+}$) as well as absorbance of 376 nm and 388 nm ($Fe^{3+}$) were seen in the flux sapphire. It was found that the difference in the absorbance variation of flux sapphire is greater than that of natural sapphire after heat treatment. The chemical composition and spectrum analysis were utilized to compare the natural sapphire and the flux synthetic sapphire.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.32-38
• /
• 2002

The characteristics of blown color of Korean traditional soy sauces under different processing conditions were investigated in this research. As for meju type, traditional and modified mejus were used. The samples were produced from four levels of aging time. 0 day, 60 days, 120 days and 180 days in both clay jar and glass jar. Color intensity of soy sauce was probed with different mothods. In terms of colorcharacteristics, the absorbance at 420 nm seemed to reflect the brown color intensity of soy sauces. UV-VIS spectra of the soy sauce with traditional meiu revealed that the absorbance at 235 nm was produced during the soaking period whereas that at 410 nm was created during the aging process and only round in the spectra of soy sauce aged for 180 days. As for the soy sauce with modified meiu, the maximum absorbance was focused at 235 nm which were prepared during soaking period.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.52-56
• /
• 1991

The browning reaction of sugar derivatives, fructo-oligosaccharide, high maltose syrup(HMS), sorbitol and maltitol, and their effect on the appearance of jam and candy were investigated. The spectrophotometrie scanning of the absorbance between 230 nm and 700 nm could demonstrate the heat induced browning of the sugar derivatives. Fructo-oligosaccharide and HMS showed sharp increase in absorbance at 270-330 nm range by heating at $100{\sim}120^{\circ}C$ for 1 hr but sorbitol and maltitol did not show the increase in absorbance. When the pH was lowered red from neutral to 2.0, the absorbance of HMS and sucrose increased sharply, showing that these substances are relatively unstable in acidic heating compared to fructo-oligosaccharide. The addition of glycine enhanced the browing reaction of fructo-oligosaccharide and HMS, whereas little change was observed with sucrose, sorbitol and maltitol. These browning characterisitcs of sugar derivatives were reflected to the color development of apple jam and candy where they were used. Both fructo-oligosaccharide and HMS increased the yellowness of these products, while sugar alcohols reduced the yellowness compared to sugar.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.13-21
• /
• 2000

Au-black for the application of the long wavelength infrared absorber has been prepared by evaporating Au under nitrogen gas-filled low vacuum condition. Characteristics of the deposited Au-black were carefully investigated through structural analysis, infrared absorbance measurement, and patterning of the layer, all of which are dependent on the deposition condition. High density of micro-cavity that trapped infrared were obtained, and infrared absorbance in the wavelength range from 3 $\mu\textrm{g}$ to 14 $\mu\textrm{g}$ was found to be about 90% when the Au-black layer was produced under the deposition condition of mass Per area of about 600 $\mu\textrm{g}$/cm$^{2}$ and chamber pressure of above 1 Torr. Photoresist lift-off process could be performed to pattern the Au-black, of which mass per area was below 900 $\mu\textrm{g}$/cm/ sup 2/. In view of absorbance, heat capacity, and pattern formation, the deposition condition of chamber pressure of about 1 Tow and mass per area of about 600$\mu\textrm{g}$/cm$^{2}$ was most adequate for preparing the Au-black as an infrared absorber.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2005

Although the Fourier Transform Infra-Red spectrophotometric Direct on Filter(FTIR-DOF) method is a useful analytical technique for quantifying quartz content in respirable dust samples, a number of analytical problems must be taken into consideration such as, to name only a few, inhomogeneous deposition of particles, level of environmental humidity, uneven surface of the filter, and interfering minerals in the sample. This study was designed to select the most suitable wavelength and proper filter material for the method, and to investigate effects of humidity and inhomogeneous deposition of particles on the filter. Samples of respirable dust, created in a dust chamber containing standard material of quartz, were collected using a cyclone equipped with a 25mm filter as a collection medium. The results were as follows; 1. Among seven (7) commercially available filters tested for the FTIR-DOF method, the DM 800 filter showed the best analytical performance having the lowest background absorbance bands and no overlapping peaks at 799, 779, and $695cm^{-1}$. 2. The variations of absorbance due to humidity ranged from 1.0% to 3.3% for $799cm^{-1}$, 1.0% to 3.3% for $779cm^{-1}$, and 8.9%~20.9% for $695cm^{-1}$ peaks, respectively. The $699cm^{-1}$ peak was proved to be most vulnerble to environmental humidity for quantitative analysis of quartz. 3. As for effects of inhomogeneous deposition of samples, the highest variation of absorbance of 10.9% ($13.5{\mu}g$) was observed when using the 695cm-1. The variations of absorbance from the other two peaks, 799 and $779cm^{-1}$, ranged from 1.2 to 3.2%, and 1.4 to 4.1%, respectively. Therefore, the $799cm^{-1}$ peak was considered to be most reliable for quantitative analysis of quartz. The results of this study suggest that, for quantitative analysis of quartz in the respirable dust samples, use of the $799cm^{-1}$ peak can minimize the influence of environmental humidity and inhomogeneous deposition of particles on the filter. The FTIR-DOF method, if adopted for routine analysis of quartz in the respirable dust samples, could save sample preparation time and efforts substantially and also could increase analytical throughputs. Since use of the $799cm^{-1}$ peak is prone to be affected by interferences in the sample, further research on minimizing the effects is needed.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.268-274
• /
• 2012

To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.223-228
• /
• 2012

In this study, a fiber-optic pH sensor based on a pH sol-gel film is fabricated. The sol-gel film is made by co-polymerizing tetramethoxysilane, trimethoxymethylsilane, ethanol and distilled water. As a pH indicator, a neutral red is immobilized in a thin porous film formed by the sol-gel process. The pH change in a sensing probe gives rise to a change in the color of the pH sol-gel film, and the absorbance of reflected light through the pH sol-gel film is also changed. By using a spectrometer, therefore, the spectra of reflected lights in the sensing probe with different pH values are measured. Also, the relationships between the pH values and the absorbance are analyzed on the basis of the color variations of the pH sol-gel films. In repeated experiments, the fiber-optic pH sensor shows that it has reversibility, a high reproducibility and a wide absorbance change in a pH range from pH 5 to 9. Also, we confirmed that the fabricated pH sol-gel film exhibits a fast response time, little or no pH indicator leaching and a dynamic range of 2.04 dB from pH 5 to 9. Based on the results of this study, a fiber-optic pH sensor can be developed for the pH monitoring in the harsh environments.