• 한국화재소방학회논문지
• /
• 제33권1호
• /
• pp.76-84
• /
• 2019

성능위주설계(PBD)의 주방 화재시뮬레이션을 위해 요구되는 목재 가연물의 CO 및 Soot yields 정보를 제공하기 위하여, 개방 콘 칼로리미터를 활용한 실험이 수행되었다. 싱크장 제작에 널리 사용되는 MDF와 PB를 대상으로 함수율, 표면 가공처리 방식 및 색상에 따라 총 8가지의 시편이 검토되었다. 주요 결과는 다음과 같다. 동일 두께의 시편이라도 표면 가공처리 방법에 따라 깊이 방향으로의 화재확산과 관련된 열적 관통시간에 상당한 변화가 발생됨이 확인되었다. MDF와 PB series의 CO yield는 유염 연소 구간에서 연소 모드별 그리고 표면 가공처리 방식에 따라 큰 변화가 없다. 그러나 유염 연소모드에 비해 훈소 모드에서는 약 10배의 높은 $y_{CO}$가 측정되었다. 반면에 Soot yield는 연소 모드와 표면 가공처리 방식에 따라 상당한 차이를 보였다. 특히 유염 연소모드와 표면이 가공 처리된 시편에서 보다 높은 $y_{soot}$가 확인되었다. 마지막으로 PBD의 주방 화재시뮬레이션을 위하여 측정된 MDF와 PB의 $y_{CO}$ 및 $y_{soot}$ 적용 방안이 논의되었다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2004년도 춘계 학술발표회 논문집
• /
• pp.143-150
• /
• 2004

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.22-23
• /
• 1995

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.459-462
• /
• 1999

• 대한임베디드공학회논문지
• /
• 제12권5호
• /
• pp.277-286
• /
• 2017

This paper introduces mathematical modelling and control algorithm of expendable mine disposal vehicle. This vehicle has two longitudinal thrusters, one vertical thruster and internal mass moving system which can control pitch rate. Also, the vehicle has an optical camera and forward looking sonar for underwater mine detection and classification. The vehicle is controlled via an optical cable connected with operating console on the mother ship. We describe the vehicle's 6DOF dynamic model and controller which can track the desired trajectory for the way-point tracking. These simulation results shows guidance and maneuvering performance which has other sensor data or not.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.366-368
• /
• 1994

This paper deals with the vector control that control of torque and speed of the induction motor using field-oriented control method. Rotor flux is estimated using the indirect sensing method based on the rotor circuit equation in the synchronously rotation reference frame, and slip angle and rotor position are caculated from rotor angular velocity and stator current. Through modeling and digital simulation with a voltage source inverter, it is shown that the proposed scheme gives good static and dynamic performance to the induction motor drive.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1489-1495
• /
• 2012

In this study, the active noise control experiment has been performed using induction motor noises. While the noises were measured, a induction motor was operated in different speed. For the simulation of ANC(Active Noise Control), test-bed is composed a multi-channel ANC system was constructed. In order to compare the control performance, we performed noise reduction simulations of ANC by Co-FXLMS algorithm and FXLMS algorithm. Through the simulation results, we confirmed that convergence performance and noise decrease effect of the proposed Co-FXLMS algorithm have been improved from existing FXLMS algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.946-952
• /
• 2005

The $CO_{2}$ refrigeration cycle is expected to reduce the compressor work and increase the COP by applying two-phase ejector as a device for the recovery of dissipated expansion energy. In this study, the performance of the cycle was simulated and effects of the ejector shapes on the performance of the $CO_{2}$ refrigeration cycle were investigated. The following results were obtained through the cycle simulation. The COP of the $CO_{2}$ refrigeration cycle with two-phase ejector flow which expansion is occured in the isentropic manner is increased by a maximum of 24 $\%$ than the basic cycle with expansion valve If the velocity nonequilibrium in the mixing process is assumed the COP of the cycle is increased with the increase of the length and the decrease of the section area of the mixing tube. The best cycle performance is obtained when the divergent angle of diffuser is 7.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.77-82
• /
• 2009

Many countries have been interested in sustainable development of buildings for environmental preservation. Thus it is significant to assess building envelopes in terms of $CO_2$ emissions owing to Kyoto Protocol. In this paper, a Double Skin Facade(DSF) installed in a general office building was assessed by $CO_2$ emissions(one of the performance-based assessment). To predict $CO_2$ emissions caused by the building energy consumption, the dynamic simulation program(Energy Plus) and $CO_2$ emission factor was used. Because DSF has various airflow regimes, pre-simulation runs were conducted to decide proximate optimal airflow regimes depending on seasonal variation. It is shown that the DSF can achieve 17.1-36.5% of annual energy savings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.165-168
• /
• 2004

We have analyzed the cause of black "mura" and measured it in prism light-guide plate (LGP). Properties of components used in a back light. unit (BLU) have changed by Simulation Tool. We get major factor of black "mura" for improvement in prism LGP. For the improvement of black "mura", removal of brightness "mura" at input light part must precede preferentially because of reflection characteristics of the prism LGP. Removal of brightness "mura" is improved by changing of input light part in LGP and dispersion treatment.