• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.486-492
• /
• 2004

본 논문에서는 기존의 CDMA 시스템에서 다중사용자 데이터 전송에 의해 발생하는 높은 PAPR 문제를 해결하기 위하여 pre-coding 기법을 이용한 2진 constant amplitude CDMA(CA-CDMA) 방식을 새롭게 제안한다. 제안하는 CA-CDMA의 기초인 4-user CA-CDMA 기법은 4명의 사용자에 대해 binary 크기의 신호를 출력하는 시스템이며, 이는 parity 신호를 이용하여 항상 $\pm$2의 크기를 갖고 길이가 4인 신호를 출력한다. Parity 신호는 입력되는 4명의 사용자 신호를 XOR한 신호로써 사용자들의 신호와 함께 전송되므로 별도의 부가채널을 필요로 하지 않으며, 수신단에서 쉽게 복원될 수 있다. 한편, 시스템 사용자 수의 확장은 4-user CA-CDMA를 반복 사용함으로써 이루어질 수 있다. 예로써 16-user의 경우, 4개의 4-user CA-CDMA를 병렬로 배치하고 각각의 4-user CA-CDMA에서 출력되는 신호를 다시 하나의 4-user CA-CDMA에 입력함으로써 쉽게 구현될 수 있다. 이는 각 4-user CA-CDMA의 출력 신호 역시 binary 신호이기에 가능하며, 동일한 방법으로 64-user, 256-user에 대해서도 2진 constant amplitude를 만족하는 출력 신호를 얻을 수 있다. 결국, 본 논문에서 제안하는 CA-CDMA는 코드율이 1이므로 전송속도나 대역폭 변화가 없으며, 항상 constant한 즉, PAPR이 항상 0 ㏈인 신호의 출력하여, 다중 사용자 전송에서도 비선형 HPA에 의한 왜곡을 방지하고 전력효율을 최대화 할 수 있다. 시뮬레이션 성능확인 결과, 기존의 CDMA가 다중 레벨의 크기를 갖는 신호를 출력하는데 반해, 제안된 2진 CA-CDMA는 항상 binary 레벨로서 신호를 출력함을 알 수 있으며, 비선형 HPA를 고려하였을 때 BER(bit error rate)이 크게 증가하는 일반 CDMA와 달리, 제안된 2진 CA-CDMA의 BER은 전혀 변하지 않음을 알 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.203-206
• /
• 2000

Since the amplitude of voiced fall off at about -20dB/decade, dynamic range is often compressed prior to spectral analysis so that details at weak, high frequencies may be visible. Preemphasizing the speech, either by differentiating the analog speech s$\sub$a(t) prior to A/D conversion or by differencing the discrete-time s(n)=s$\sub$a(nT), compensating for falloff at high frequencies. The most common form of preemphasis is y(n)=s(n)-As(n-1), where A typically lies between 0.9 and 1.0 and reflects the degree of pre-emphasis. In This paper, we proposed that A is adjusted at each time by measuring the slope of envelope in frequency domain.

• 한국항공운항학회지
• /
• 제3권1호
• /
• pp.37-47
• /
• 1995

It is very important to determine the performance and operating envelope of engine for aircraft's flight. The basic performance is provided by manufacturer, but installed engine's operating envelop is only determined by flight test. First, this study was measured cylinder head temperature(CHT), exhaust gas temperature(EGT) and oil temperature. At pre-determined altitude and power rate, these temperatures were measured by change of mixture ratio and mixture ratio condition for economic operation and max. power were found. And secondly, with the measured temperatures, possible positions of mixture lever were determined by flight test for stable flight Chang-91 and Lycoming IO-360-A series four cylinders engine with 200 hp was used for this study.

• Journal of Astronomy and Space Sciences
• /
• 제25권4호
• /
• pp.329-334
• /
• 2008

We investigate the spectral energy distributions (SEDs) of Massive Young Stellar Objects (MYSOs) using the various infrared observational data including the Infrared Space Observatory (ISO) data. We model the dust envelopes around the stars using a radiative transfer model for spherically symmetric geometry. Comparing the model results with the observed SEDs of the two MYSOs (AFGL 4176 and AFGL 2591), we derive the relevant dust shell parameters including the dust opacity, the dust density distribution, and dust temperature distribution. We find that the spherical model can produce the SEDs roughly similar to the observations. We expect that the results would be helpful for making more realistic non-spherical dust envelope models for MYSOs.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.54-61
• /
• 2004

The purpose of this study is to improve of energy performance in school buildings. Many building renovations have mainly focused on commercial buildings and houses, but school buildings have no attention in this field although there are many buildings that show degraded energy performance and there are many old fashioned buildings which need renovation. This study was carried out through the survey, field study, energy simulation and life cycle cost analysis. The results of this study can be summarized as follows: In model building, large amount of heat were lost at the building envelope, such as non-insulated skins, window-sills and window-frame joints. According to the simulation result, about 15％ of heating energy is saved by the insulating works compared to pre-renovation condition. Also, LCC analysis revealed to be more effective to select a exteria wall insulation such as a dryvit system.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.17-24
• /
• 2006

The application of photovoltaics into building as integrated building components has been paid more attention worldwide. Photovoltaics or solar electric modules are solid state devices, directly converting solar radiation into electricity; the process does not require fuel and any moving parts, and produce no pollutants. And the prefab building method is very effective because the pre- manufactured building components is simply assembled to making up buildings in the construction fields especially the sandwich panel. Architecture considerations for the integration of PV module to building envelope such as building structure, construction type, safety, regulation, maintenance etc. have been carefully refelected from the early stage of BIPV module design. Trial product of BIPV module are manufactured and sample construction details for demonstration building are purposed. Therefore, this paper intends to advanced its practical use by proposing how to get integrated PV system which can be applied to prefab building material, and how to apply it.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 1부
• /
• pp.253-256
• /
• 2010

Since the amplitude of voiced fall off at about -20dB/decade, dynamic range is often compressed prior to spectral analysis so that details at weak, high frequencies may be visible. Preemphasizing the speech, either by differentiating the analog speech $s_a$(t) prior to A/D conversion or by differencing the discrete-time s(n)=$s_a$(nT), compensating for falloff at high frequencies. The most common form of preemphasis is y(n)=s(n)-As(n-1), where A typically lies between 0.9 and 1.0 and reflects the degree of pre-emphasis. In this paper, we proposed that A is adjusted at each time by measuring the slope of envelope in frequency domain.

• Journal of Oral Medicine and Pain
• /
• 제16권1호
• /
• pp.113-120
• /
• 1991

The authors examined the patterns and various ranges of mandibular movements in TMJ lock closed patients in the frontal, sagittal and horizontal plane pre-end post-treatment. And the author obtained the following results. 1. In the frontal plane, the patterns and ranges of mandibular movement of the patients were very irregular and small before treatment. But after the treatment, the patterns were similar to the typical shield shape of the normal subjects. And the velocity of opening and closing was improved after the treatment. 2. In the sagittal plane, the mean amount of maximum mouth opening was 27.0±4.0mm before treatment and 44.0±5.4mm after treatment. And there was statistically significant improvement(p<0.005). The patterns of the movement were very irregular and small before treatment, but were similar to the shape of "Posselt's envelope of motion" after the treatment. The velocity of opening and closing was improved after the treatment 3. In the horizontal plane, the mean amount of maximum laterotrusion was 8l2±2.5mm in the affected side and 6.7±2.2mm in the non-affected side before treatment. There was a significant difference between the sides(p<0.05). After the treatment, the mean was 10.4±2.6mm in the affected side and 8.9±2.3mm in the non-affected side and there was no significant difference between the sides(p>0.05). There was no significant difference in the mean amount of maximum protrusion between the before and aftertreatment(p>0.05), but the patterns of the movements were improved.

• 한국정보통신학회논문지
• /
• 제22권5호
• /
• pp.740-746
• /
• 2018

지금까지 컴퓨터악기 제작시도는 크게 샘플링 (sampling)방식과 피지컬 모델링(physical modeling)의 2가지 방식이 주를 이루었다. 샘플링 방식은 샘플링 과정에서 배음의 많은 부분이 삭제되기 때문에 현의 배음을 강조하는 익사이터(exciter) 효과가 미미하다. 하지만 피지컬 모델링 방식에서는 많은 배음을 지닌 음을 만들어 낼 수 있으며 이 배음 중 특별한 주파수대의 배음을 강조함으로써 더욱 실음에 가까운 음색을 만들어 낼 수 있다. 여기서는 현의 피지컬 모델링에 있어서 현의 특정 주파수대의 배음을 강조하는 익사이터를 구현함에 있어 화이트노이즈(백색소음)을 이용하는 방법을 제안한다. 그리고 가야금 소리의 엔벨로프(envelope)와 스펙트럼 비교를 통해 익사이터를 갖는 피지컬모델링 방식이 샘플링 방식 및 기존의 피지컬 방식보다 실제 가야금 소리에 더 적합함을 확인하였다.