• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.17-30
• /
• 2010

Many applications in Wireless Sensor Networks require collecting all data without loss from nodes. End-to-End data retransmission, which is used in the Internet for reliable transport, becomes very inefficient in Wireless Sensor Networks, since wireless communication, and constrained resources pose new challenges. We look at factors affecting reliability, and search for efficient combinations of the possible options. This paper proposes an efficient Overhearing based reliable transfer protocol in Wireless Sensor Networks by introducing Selective and implicit Acknowledgement. Finally, it is clarified that the proposed scheme is efficient for reliable data transfer in WSN.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.11a
• /
• pp.9-21
• /
• 2005

To study the biochemical and physiological role of the plastidic glucose transporter (pGlcT) in carbohydrate metabolism, we characterized transgenic plants with mutations in the pGlcT gene (GT), gt-1 and gt-2, as well double mutants of GT and the maltose transporter (MEX1) and GT and the triose phosphate/phosphate translocator (TPT), GT and the cytosolic fructose-1,6-bisphosphatase gene (cFBP), and MEX1 and TPT, gt-1/mex2, gt-1/tpt-2, gt-1/cfbp-1, mex1-1/tpt-2, respectively. Compared to the wild type, all mutants except the gt-1/cfbp-1 mutant lines displayed higher starch accumulation and higher levels of maltose. Starch accumulation is due to a decrease in starch turnover, leading to an imbalance between the rates of synthesis and degradation. Sucrose levels of gt alleles were higher than those in wild-type plants during the light period, suggesting possible nightly supplementation via the maltose transport pathway to maintain proper carbohydrate partitioning in the plant leaves. The gt plants displayed less growth retardation than mex1-1 mutant and gt-1/mex2 double mutant displayed accumulativesevere growth retardation as compared to individual gt-1 and mex1-1 mutants, implying that the maltose transporter-mediated pathway is a major route for carbohydrate partitioning at night. The gt-1/tpt-2, mex1-1/tpt-2 and gt-1/cfbp-1 double mutants had retarded growth and low chlorophyll content to differing degrees, indicating that photosynthetic capacity had diminished. Interestingly, the gt-1/tpt-2 line displayed a glucose-insensitive phenotype and higher germination rates than wild type, suggesting its involvement not only in carbon partitioning, but also in the sugar signaling network of the pGlcT and TPT.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.5
• /
• pp.609-617
• /
• 2012

A dynamic water quality model is presented in order to simulate water quality under slowly varying flow conditions over time. To improve numerical accuracy, the proposed model uses a lumped system approach instead of extended period simulation, unlike the other available models. This approach can achieve computational efficiency by assuming liquid and pipe walls to be rigid, unlike the method of characteristics, which has been successfully implemented in rapidly varying flows. The discrete volume method is applied to resolve the advection and reaction terms of the transport equation for water quality constituents in pipes. Numerical applications are implemented to the pipe network examples under steady and unsteady conditions as well as hydraulic and water quality simulations. The numerical results are compared with EPANET2, which is a widely used simulation model for a water distribution system. The model results are in good agreement with EPANET2 for steady-state simulation. However, the hydraulic simulation results under unsteady flows differ from those of EPANET2, which causes a deviation in water quality prediction. The proposed model is expected to be a component of an integrated operation model for a water distribution system if it is combined with a computational model for rapidly varying flows to estimate leakage, pipe roughness, and intensive water quality.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.8-19
• /
• 2020

We see an energy fucused smart city evolution of the UK along with the project of "Smart London Plan (SLP)." A theoretical logic of business model innovation has been discussed and a research framework of evolving energy focused smart city is formulated. The starting point is the silo system. In the second stage, the private investment in smart meters establishes a basement for next stages. As results, the UK's smart energy sector has evolved from smart meter installation through smart grid to new business models such as water-energy nexus and microgrid. Before smart meter installation of the government, the electricity system was centralized. However, after consumer engagement plan has been set to make them understand benefits that they can secure through smart meters, the customer behavior has been changed. The data analytics firm enables greater understanding of consumer behavior and it helps energy industry to be smart via controlling, securing and using that data to improve the energy system. In the third stage, distribution network operators (DNOs)' access to smart meter data has been allowed and the segmentation starts. In the fourth stage, with collaboration of Ofwat and Ofgem, it is possible to eliminate unnecessary duplication of works and reduce interest conflict between water and electricity. In the fifth stage, smart meter and grid has been integrated as an "adaptive" system and a transition from DNO to DSO is accomplished for the integrated operation. Microgrid is a prototype for an "adaptive" smart grid. Previous steps enable London to accomplish a platform leadership to support the increasing electrification of the heating and transport sector and smart home.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.969-974
• /
• 2011

A carbon nanotube (CNT) is a cylindrical carbon nanostructure with good transport properties along the tube's axis. As an approach for realizing the practical use of CNTs, CNT networks are fabricated and their applications in many fields are investigated. To fabricate thin CNT-based films, several methods have been proposed and used. Among these methods, the spray coating method is a robust method for fabricating a large area. However, it is difficult to achieve uniformity in the CNT network. To solve this problem, it is necessary to understand the effect of the sprayprocess parameters on the deposition thickness distribution. In this study, a numerical model for predicting the deposition thickness distribution during the spray process was developed. The spatial deposition thickness distributions obtained according to various nozzle paths were analyzed using the developed numerical model.

• Korean Membrane Journal
• /
• v.2 no.1
• /
• pp.36-47
• /
• 2000

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.657-660
• /
• 2007

In the present age, a vehicle works important part in our lives and economical domain that transport people, freights, and everything. And both of its number and value are increasing more and more. But user's convenience, control system could not be archived improvement than technological success. In this paper, we suggest some kinds of administrative agendas; simplifying executive processes, designing vehicle information system using by RFID which includes Ubiquitous skill and optical communication network. Especially, this paper suggests public vehicle control model which can simplify every executive processes of vehicle's life in the newest method. There are many kinds of RFID applicative products about transportation. And a dual invest should be interrupted for economical purpose. So this paper also proposes some way for problems of these types.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.123-130
• /
• 2004

Routing and wavelength assignment(RWA) problem is an important issue in optical transport networks based on wavelength division multiplexing(WDM) technique. It is typically solved using a combination of linear programming and graph coloring, or path selection based graph algorithms. Such methods are either complex or make extensive use of heuristics. In this paper we propose a novel and efficient approach which basically obtains the maximum edge disjoint paths (EDPs) for each source-destination demand pair. And those EDPs obtained are stored in Lookup Table and used for the update of weight matrix. Routes are determined in order by the weight matrix for the demand set. The comprehensive computer simulation shows that the Proposed algorithm uses similar or fewer wavelengths with significantly less execution time than bounded greedy approach (BGA) for EDP which is currently known to be effective in practice.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.55-64
• /
• 2007

Behind the popularity of VoIP in these days, it may present significant security challenges in privacy and accounting. Authentication and message encryption are considered to be essential mechanisms in VoIP to be comparable to PSTN. SIP is responsible for setting up a secure call in VoIP. SIP employs TLS, DTLS or IPSec combined with TCP, UDP or SCTP as a security protocol in VoIP. These security mechanisms may introduce additional overheads into the SIP performance. However, this overhead has not been understood in detail by the community. In this paper we present the effect of the security protocol on the performance of SIP by comparing the call setup delays among security protocols. We implement a simulation of the various combinations of three security protocols and three transport layer protocols suggested for SIP. UDP with any combination of security protocols performs a lot better than the combination of TCP. TLS over SCTP may impose higher impact on the performance in average because TLS might have to open secure channels as the same number of streams in SCTP. The reasons for differences in the SIP performances are given.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.5
• /
• pp.43-53
• /
• 2010

This study investigates a design optimization of a rotating two-pass rectangular cooling channel with staggered arrays of pin-fins. The radial basis neural network method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The ratio of the diameter to height of the pin-fins and the ratio of the streamwise spacing between the pin-fins to height of the pin-fin are selected as design variables. The optimization problem has been defined as a minimization of the objective function, which is defined as a linear combination of heat transfer related term and friction loss related term with a weighting factor. Results are presented for streamlines, velocity vector fields, and contours of Nusselt numbers, friction coefficients, and turbulent kinetic energy. These results show how fluid flow in a two-pass square cooling channel evolves a converted secondary flows due to Coriolis force, staggered arrays of pin-fins, and a $180^{\circ}$ turn region. These results describe how the fluid flow affects surface heat transfer. The Coriolis force induces heat transfer discrepancy between leading and trailing surfaces, having higher Nusselt number on the leading surface in the second pass while having lower Nusselt number on the trailing surface. Dean vortices generated in $180^{\circ}$ turn region augment heat transfer in the turning region and in the upstream region of the second pass. As the result of optimization, in comparison with the reference geometry, thermal performance of the optimum geometry shows the improvement by 30.5%. Through the optimization, the diameter of pin-fin increased by 14.9% and the streamwise distance between pin-fins increased by 32.1%. And, the value of objective function decreased by 18.1%.