• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.191-199
• /
• 2000

This study was initiated to investigate the influence of biophysical condition on the composting characteristics, and conducted to develop technology for using recycled compost as a bulking agent cost to reduce operating cost. To methods of aeration, continuous aeration (CA: run No. I) and intermittent aeration (IA: run No. 2) were performed with three 12.3 liter laboratory scale vessels for ten days. Manure and rice hulls were mixed for thirst trial (I), rice hulls and recycled compost after first trial were mixed for second trial (II), dairy manure and only recycled compost after second trial were mixed for third trial (III). During the composting process, temperatures of the compost mass and ammonia emissions were measured. The quality and maturity of compost were ascertained by examining the characteristics and composition of the compost. Also, loss of mass was determined by measuring the mass of materials in the vessels before and after composting. The results in this study are as follows: 1. The periods of optimum temperature ($>55^{\circ}C$) to kill pathogens were maintained from 38 to 78 hours for CA and from 60 to 98 hours for IA. 2. The more recycled compost mixed, the more ammonia emitted. The maximum ammonia emissions were 287 ppm at CA and 420 ppm at IA. 3. Biofiltration system was required for the compo sting system using only recycled compost as an amendment, because the ammonia emissions was produced above 100 ppm at the end of composting process. 4. The quality and maturity of compost: - Fresh compost, were required drying, because moisture contents of the compost were approximately 70% in all tests. - The pH values were observed to rise smoothly, from 7.9 to 8.3 at CA and from 8.4 to 8.6 at IA. The CfN ratios of the fresh compost were ranged form 21.05 to 16.42 for CA and from 22.81 to 14.75 for IA. The final C/N ratios for test II and III were below 20.were below 20.

• Korean Journal of Psychosomatic Medicine
• /
• v.14 no.2
• /
• pp.102-107
• /
• 2006

Objectives : The aim of this study is to evaluate depressive symptom of methamphetamine(MA) dependent subjects and the association between depressive symptom and characteristics of methamphetamine use. Methods : Forty three MA dependent subjects and 40 healthy comparison subjects were recruited in this study. Characteristics of substance use and depressive symptom using Beck Depression Inventory (BDI) were evaluated. Results : Average BDI score of methamphetamine group is $14.1{\pm}7.7$, which is significantly higher than that of healthy comparison subjects $(7.3{\\pm}5.7)$ (t=4.04, df=65, p<0.001). Given that 38.9% of MA dependent subjects and 22.6% of healthy comparison subjects are attributed to mild to moderate depressed state and 27.8% of MA dependent subjects and 3.2% of healthy comparison subjects to moderate-severe depressed state, depressive symptom is more frequently observed in MA dependent subjects relative to healthy comparison subjects (p=0.001). On covariating as sex, age, alcohol use and smoking, prevalence of depressive symptom is still higher in MA dependent subjects than healthy comparison subjects (OR=300.7, p=0.012). BDI scores of MA dependent subjects are correlated with abstinence period (r=-0.35, n=36, p=0.042) but not with cumulative dose or duration of use (r=-0.08, n=36, p=0.677 : r=-0.08, n=36, p=0.658). Conclusion : Depressive symptom was severe and frequently observed in MA dependent subjects. This study suggested that depressive symptom of MA dependent subjects might be not associated with degree of MA use but decreased by persistent abstinence.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.685-691
• /
• 2005

Growth and DNA synthesis inhibitory effects of doenjang methanol extract and its solvent fractions on AGS human gastric adenocarcinoma cells, Hep 3B human hepatocellular carcinoma cells, HT-29 human colon cancer cells and MG-63 human osteosarcoma cells were studied. The treatment of doenjang methanol extract ($ 200{\mu}g/ml $) with the AGS, Hep 3B, HT-29 and MG-63 cancer cells after 6 days of incubation inhibited the growth of cancer cells by $32\%$, $51\%$, $84\%$ and $33\%$, respectively. To separate active compounds of doenjang, doenjang methanol extract was fractionated with dichloromethane, ethylacetate, and buthanol. Among the solvent fractions, the dichloromethane and ethylacetate fractions showed the highest growth inhibitory effects on various cancer cells. For example, the dichloromethane and ethylacetate fractions ($200a{\mu}g/ml$) sig-nificantly inhibited the growth of various cancer cells by $89\∼96\%$ and$62\∼86\%$, respectively. DNA synthesis of AGS and Hep 3B cancer cells was significantly inhibited by adding dichloromethane fraction ($200{\mu}g/ml$) up to $94\%$ and $80\%$, respectively. Similarly, the ethylacetate fraction ($ 200\mug/ml $) showed a $ 95\% $ inhibition rate of DNA synthesis in AGS cells. These results suggest that the dichloromethane and ethylacetate fractions have specific active compounds, which will explain this anticancer effect of doenjang.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.3
• /
• pp.27-57
• /
• 2008

Many consumers enjoy the challenge of purchasing a brand that matches well with their own values and personalities (for example, Ko et al., 2008; Ko et al., 2006). Therefore, the personalities of consumers can impact on the final selection of a brand and its brand personality in two ways: first, the consumers may incline to purchase a brand or a product that reflects their own personalities; second, consumers tend to choose a company that has similar brand personalities to those brands that are being promoted. Therefore, the objectives of this study are following: 1. Is there any empirical relationship between a consumer's personality and the personality of a brand that he or she chooses? 2. Can a corporate brand be differentiated by the brand personality? In short, consumers are more likely to hold favorable attitudes towards those brands that match their own personality and will most probably purchase those brands matching well with their personality. For example, Matzler et al. (2006) found that extraversion and openness were positively related to hedonic product value; and that the personality traits directly (openness) and indirectly (extraversion, via hedonic value) influenced brand effects, which in turn droved attitudinal and purchase loyalty. Based on the above discussion, the following hypotheses are proposed: Hypothesis 1: the personality of a consumer is related to the brand personality of a product/corporate that he/she purchases. Kuksov (2007) and Wernerfelt (1990) argued that brands as a symbolic language allowed consumers to communicate their types to each other and postulated that consumers had a certain value of communicating their types to each other. Therefore, how brand meanings are established, and how a firm communicate with consumers about the meanings of the brand are interesting topics for research (for example, Escalas and Bettman, 2005; McCracken, 1989; Moon, 2007). Hence, the following hypothesis is proposed: Hypothesis 2: A corporate brand identity is differentiated by the brand personality. And there are significant differences among companies. A questionnaire was developed for collecting empirical measures of the Big-Five personality traits and brand personality variables. A survey was conducted to the online access panel members through the Internet during December 2007 in Korea. In total, 500 respondents completed the questionnaire, and considered as useable. Personality constructs were measured using the Five-factor Inventory (NEO-FFI) scale and a total of 30 items were actually utilized. Brand personality was measured using the five-dimension scale developed by Aaker (1997). A total of 17 items were actually utilized. The seven-point Likert-type scale was the format of responses, for example, from 1 indicating strongly disagreed to 7 for strongly agreed. The Analysis of Moment Structures (AMOS) was used for an empirical testing of the model, and the Maximum Likelihood Estimation (MLE) was applied to estimate numerical values for the components in the model. To diagnose the presence of distribution problems in the data and to gauge their effects on the parameter estimates, bootstapping method was used. The results of the hypothesis-1 test empirically show that there exit certain causality relationship between a consumer's personality and the brand personality of the consumer's choice. Thus, the consumer's personality has an impact on consumer's final selection of a brand that has a brand personality matches well with their own personalities. In other words, the consumers are inclined to purchase a brand that reflects their own personalities and tend to choose a company that has similar brand personalities to those of the brand being promoted. The results of this study further suggest that certain dimensions of the brand personality cause consumers to have preference to certain (corporate) brands. For example, the conscientiousness, neuroticism, and extraversion of the consumer personality have positively related to a selection of "ruggedness" characteristics of the brand personality. Consumers who possess that personality dimension seek for matching with certain brand personality dimensions. Results of the hypothesis-2 test show that the average "ruggedness" attributes of the brand personality differ significantly among Korean automobile manufacturers. However, the result of ANOVA also indicates that there are no significant differences in the mean values among manufacturers for the "sophistication," "excitement," "competence" and "sincerity" attributes of the corporate brand personality. The tight link between what a firm is and its corporate brand means that there is far less room for marketing communications than there is with products and brands. Consequently, successful corporate brand strategies must position the organization within the boundaries of what is acceptable, while at the same time differentiating the organization from its competitors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.819-826
• /
• 2009

An in vitro study was conducted to investigate the effect of malate or fumarate on fermentation characteristics, and production of conjugated linoleic acid (CLA) and methane ($CH_4$) by rumen microbes when incubated with linolenic acid (${\alpha}-C_{18:3}$). Sixty milligrams of ${\alpha}-C_{18:3}$ alone (LNA), or ${\alpha}-C_{18:3}$ with 24 mM malic acid (M-LNA) or ${\alpha}-C_{18:3}$ with 24 mM fumaric acid (F-LNA) were added to the 150 ml culture solution consisting of 75 ml strained rumen fluid and 75ml McDougall's artificial saliva. Culture solution for incubation was also made without malate, fumarate and ${\alpha}-C_{18:3}$ (Control). Two grams of feed consisting of 70% concentrate and 30% ground alfalfa (DM basis) were also added to the culture solution of each treatment. In vitro incubation was made anaerobically in a shaking incubator up to 12 h at $39^{\circ}C$. Supplementation of malate (M-LNA) or fumarate (F-LNA) increased pH at 6 h (p<0.01) and 12 h (p<0.001) incubation times compared to control and linolenic acid (LNA) treatments. Both malate and fumarate did not influence the ammonia-N concentration. Concentration of total VFA in culture solution was higher for M-LNA and F-LNA supplementation than for control and LNA treatments from 6 h (p<0.040) to 12 h (p<0.027) incubation times, but was not different between malate and fumarate for all incubation times. Molar proportion of $C_3$ was increased by F-LNA and M-LNA supplementation from 6 h (p<0.0001) to 12 h (p<0.004) incubation times compared to control and LNA treatments. No differences in $C_{3}$ proportion, however, were observed between M-LNA and F-LNA treatments. Accumulated total gas production for 12h incubation was increased (p<0.0002) by M-LNA or F-LNA compared to control or LNA treatment. Accumulated $CH_4$ production for 12 h incubation, however, was greatly reduced (p<0.0002) by supplementing malate or fumarate compared to the control, and its production from M-LNA or F-LNA treatment was smaller than that from LNA treatment. Methane production from LNA, M-LNA or F-LNA treatment was steadily lower (p<0.01 - p<0.001) from 3 h incubation time than that from the control, and was also lower for M-LNA or F-LNA treatment at incubation times of 6 h (p<0.01) and 9 h (p<0.001) than for LNA treatment. Methane production from LNA, however, was reduced (p<0.01 - p<0.001) from 3 h to 9 h incubation times compared to the control. Both malate and fumarate increased concentration of trans11-$C_{18:1}$ from 3 h to 12 h incubation (p<0.01), cis9,trans11-CLA up to 6 h incubation (p<0.01 - p<0.01), trans10,cis12-CLA at 3 h (p<0.05) and 12 h (p<0.01), and total CLA for all incubation times (p<0.05) compared to corresponding values for the ${\alpha}-C_{18:3}$ supplemented treatment (LNA). In conclusion, malate and fumarate rechanneled the metabolic $H_2 pathway to production of propionate and CLA, and depressed the process of biohydrogenation and methane generation. Linolenic acid alone would also be one of the optimistic alternatives to suppress the $CH_4$ generation.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.383-397
• /
• 1999

Bone is a dynamic tissue which is constantly remodelled by subsequent cycles of bone resorption and formation. Glucocorticoid and vitamine $D_3$ are known as regulating substances in bone metabolism. In vitro experiments using bone tissue, it was suggested that glucocorticoid inhibits bone resorption, whereas the effect of glucocorticoid on bone formation are complex- increasing or decreasing effect. The active form of vitamin $D_3$, 1,25-dihydroxycholecalciferol[1.25-$(OH)_2D_3$], has been reported to stimulate osteoblastic activities including the production of ALP, type I collagen, and osteoclacin. The purpose of this study was to evaluate the effect of admixture of vitamin $D_3$ and dexamethasone, one of glucocorticoids, on osteoblastic cell line(MC3T3-E1). Alkaline phosphatase(ALP) and MTT assay were conducted in the cultivated cells with 1, 10, 100nM/ml of 1,25-$(OH)_2D_3$ and/or 10nM/ml, 100nM/ml, $1{\mu}M/ml$ of dexamethasone. The observed results were as follows. 1. The activity of osteoblastic cells with $1{\mu}M/ml$ of dexamethasone was significantly increased at 1-day cultivation with comparison to control group, but was decreased afterwards. But the activity of ALP was greatest in $1{\mu}M/ml$ of dexamethasone and increased with time lapsed. 2. The activity of osteoblastic cells with vitamin $D_3$ was significantly increased dose-dependently at 1-day cultivation, but was significantly decreased in l00nM/.ml at 2-day cultivation, and was a little increased again at 3-day cultivation. The activity of ALP was increased in 10nM/ml or 100nM/ml at 2-day or 3-day cultivation, and was greatest in 100nM/ml at 3-day cultivation. 3. In case of admixture of dexamethasone and vitamin $D_3$, the cellular activity was decreased in any concentration of vitamin $D_3$ at 2-day cultivation, but was increased again at 3-day cultivation, which was greater than that in control or dexamethasone only group. The activity of ALP was decreased at 1-day cultivation, but was increased in the admixture of 10nM/ml or 100nM/ml of dexamethasone with 100nM/ml of vitamin $D_3$ at 2-day cultivation, and was again decreased at 3-day cultivation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.3
• /
• pp.147-160
• /
• 2020

A stochastic probabilistic model for harbor structures such as rubble-mound breakwater has been formulated by using the generalized Wiener process considering the nonlinearity of damage drift and its nonlinear uncertainty, by which the damage path with real-time can be tracked, the residual useful lifetime at some age can also be analyzed properly. The formulated stochastic model can easily calculate the probability of failure with the passage of time through the probability density function of cumulative damage. In particular, the probability density functions of residual useful lifetime of the existing harbor structures can be derived, which can take into account the current age, its present damage state and the future damage process to be occurred. By using the maximum likelihood method and the least square method together, the involved parameters in the stochastic model can be estimated. In the calibration of the stochastic model presented in this paper, the present results are very well similar with the results of MCS about tracking of the damage paths as well as evaluating of the density functions of the cumulative damage and the residual useful lifetime. MTTF and MRL are also evaluated exactly. Meanwhile, the stochastic probabilistic model has been applied to the rubble-mound breakwater. The related parameters can be estimated by using the experimental data of the cumulative damages of armor units measured as a function of time. The theoretical results about the probability density function of cumulative damage and the probability of failure are very well agreed with MCS results such that the density functions of the cumulative damage tend to move to rightward and the amounts of its uncertainty are increased as the elapsed time goes on. Thus, the probabilities of failure with the elapsed time are also increased sharply. Finally, the behaviors of residual useful lifetime have been investigated with the elapsed age. It is concluded for rubble-mound breakwaters that the probability density functions of residual useful lifetime tends to have a longer tail in the right side rather than the left side because of the gradual increases of cumulative damage of armor units. Therefore, its MRLs are sharply decreased after some age. In this paper, the special attentions are paid to the relationship of MTTF and MRL and the elapsed age of the existing structure. In spite of that the sum of the elapsed age and MRL must be equal to MTTF deterministically, the large difference has been shown as the elapsed age is increased which is due to the uncertainty of cumulative damage to be occurred in the future.

• Korean Journal of Poultry Science
• /
• v.41 no.1
• /
• pp.7-14
• /
• 2014

Tyrosinase (TYR) gene is located on chromosome 1 in chicken and it is composed of five exons and four introns. TYR gene is described as a key enzyme in melanin biosynthesis. Most examples of complete albinism in chicken have been due to defects in the tyrosinase gene. The association of feather color and sequence polymorphism in the Tyrosinase (TYR) gene was investigated using Korean Native chicken H breed (H_PL), Korean Native chicken L/W breed(L/W_PL) and 'Woorimatdag' commercial chickens (Woorimatdag_CC). From L_PL and W_PL breed analyses, 4 synonymous SNPs (locus G33A, G116A, C217T and C247T) and 2 SNPs (G838A and G958A) were detected in 4th exon and 4th intron of TYR gene respectively. The genotype frequencies for 6 SNPs were compared between L_PL and W_PL and W_PL represented homozygous SNP types in all the analyzed SNP positions while L_PL displayed various SNP types.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.172-182
• /
• 1988

To reveal the association between blood selenium level and the gastric diseases, 180 persons received the gastrofiberscopic examination at the outpatients department of the two university hospitals from July to September 1987, after the exclusion of the persons having the esophageal varix, were randomly selected. Their general characteristics such as age, sex and educational level and so on, were inverstigated. Five mi venous blood was collected from each subjects and stored at $0^{\circ}C$ in heparinized vaccum tube. The blood selenium level was measured by the flameless atomic absorption spectrophotometry. In the procedure of data analysis, five subjects having benign tumor and anomaly of the stomach, were also excluded. The mean blood selenium levels of the $155.5{\mu}g/{\ell}$ among gastritis cases, the $154.8{\mu}g/{\ell}$ gastric ulcer and the $133.0{\mu}g/{\ell}$ gastric malignancy were significantly lower(p<0.05) than that of the $173.3{\mu}g/{\ell}$ among normal controls. In men the mean blood selenium levels .among gastritis, gastric ulcer and gastric malignancy cases were significantly lower(p<0.05) than that among normal controls. In females, the mean blood selenium levels among gastritis and gastric maligancy cases were significantly lower(p<0.05) than that among normal controls($169.7{\mu}g/{\ell}$), but that among gastric ulcer cases($177.7{\mu}g/{\ell}$) was not significantly higher. In the logistic analysis, coefficient of the blood selenium level was -0.0436(p<0.05 : odds ratio 0.957) for gastritis, -0.0197(p=0.17 : 0.981) for gastric ulcer, -0.4876(p<0.05 : 0.614) for gastric malignancy and -0.0411(p<0.05 ; 0.960) for gastric diseases including the gastritis, the gastric ulcer and the gastric malignancy. These data support the hypothesis that the gastric diseases are to be associated with the low selenium level but, for the gastric ulcer, the further research is recommended.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1