• Korean Journal of Poultry Science
• /
• v.39 no.2
• /
• pp.133-141
• /
• 2012

This study was carried out to investigate the performance of laying period of two-way crossbred of Korean native chickens. A total of four hundred eighty female 2-crossbred chicks that restored strains and were aboriginal at National Institute of Animal Science. Treatments were four crossbreds (4 replications/crossbred, 30 birds/replication) as A) C strain ${\times}$ S strain, B) C strain ${\times}$ H strain, C) R strain ${\times}$ S strain, and D) L strain ${\times}$ H strain, respectively. There were no significant difference on age, egg weight, and body weight at first egg among crossbreds (P>0.05). Body weight of D crossbred was lower compared to other crossbreds at the age of 24, 32, 40 and 60 week (P<0.05). Feed intake of A crossbred was highest among crossbreds (P<0.05). Weekly egg weight of A crossbred was the highest among crossbreds all laying period except 48~52 and 60~64 weeks. Hen-house egg production of A and B crossbreds was higher than that of C and D crossbreds (P<0.05). Hen-day egg production decreased after at the age of 36 weeks. Weekly egg production of A and B crossbreds was higher compared to C and D crossbreds (P<0.05). These results suggested the basic data on the record of laying period of 2-crossbreed Korean Native Chickens.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.396-401
• /
• 2002

The purpose of this 3-D numerical simulation is evaluate the application of a commercial CFD code to predict 3-D flow characteristics of wind turbine. The experimental approach, which has been main method of investigation, appears to be its limits, the cost increasing disproportionally with the size of the wind turbines, and is hence mostly limited to observing the phenomena. Hence, the use of Computational Fluid Dynamics (CFD) techniques and Wavier-Stokes solvers are considered a very serious contender. The flow solver CFX-TASCflow is employed in all computations presented in this paper. The 3-D flow separation and the wake distribution of 2 bladed Horizontal Axis Wind Turbines (HAWTs) are compared to Heuristic model and visualized result by NREL(National Renewable Energy Laboratory). Simulated 3-D flow separation structure on the rotor blade is very similar to Heuristic model and the wake structure of the wind turbine is good agree with visualized results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.164-164
• /
• 2010

The impurity doped ZnO has been extensively studied because of its optoelectric properties. GIZO (Ga-In-Zn-O) amorphous oxide semiconductors has been widely used as transparent flexible semiconductor material. Recently, various amorphous transparent semiconductors such as IZO (In-Zn-O), GIZO, and HIZO (Hf-In-Zn-O) were developed. In this work, we examined the local structures of IZO, GIZO, and HIZO. The local coordination structure was investigated by the extended X-ray absorption fine structure. The IZO, GIZO and HIZO thin films ware deposited on the glass substrate with thickness of 400nm by the radio frequency sputtering method. The targets were prepared by the mixture of $In_2O_3$, ZnO and $HfO_2$ powders. The percent ratio of In:Zn in IZO, Ga:In:Zn in GIZO and Hf:In:Zn in HIZO was 45:55, 33:33:33 and 10:35:55, respectively. In this work, we found that IZO, GIZO and HIZO are all amorphous and have a similar local structure. Also, we obtained the bond distances of $d_{Ga-O}=1.85\;{\AA}$, $d_{Zn-O}=1.98\;{\AA}$, $d_{Hf-O}=2.08\;{\AA}$, $d_{In-O}=2.13\;{\AA}$.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.264-270
• /
• 2012

In this study, we mainly focus on the study of densification of gas-atomized Cu-50 wt.%In-13 wt.%Ga alloy powder without occurrence of crack during the forming process. Cu-50 wt.%In-13 wt.%Ga alloy powder was consolidated by sintering and rolling processes in order to obtain high density. The phase and microstructure of formed materials were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical microscopy (OM), respectively. Warm rolling using copper can result in the improvement of density. The specimen obtained with 80% of rolling reduction ratio at $140^{\circ}C$ using cooper can have the highest density of $8.039g/cm^3$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.979-983
• /
• 2007

In this thesis, a strip layout drawing of LCD S/C (shield case) was prepared. In the press die, strip layout drawing is a major factor that decides the mass production of a product. The 3D CAD/CAM system was applied for the easy correction of the interference factor with other parts to be mounted. The material use ratio was enhanced to 60.17% by optimizing the blank layout and strip layout in double width array. Furthermore, the flatness of the product was made to fit the requirements by adding the bidding process intensively on the notching part where the occurrence of the change in shape is expected owing to the thin material. For the 3D CAD/CAM software, Unigraphics NX3.0 was used. The strip layout drawing was prepared in 12 processes.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.646-653
• /
• 2011

The combined system of sequencing batch biofilm reactor (SBBR) and membrane SBR (MSBR) was operated with sewage to evaluate the COD utilization for biological nutrient removal (BNR). The SBBR was operated for nitrification reactor, while denitrifying PAO (dPAO) was cultivated in MSBR with anaerobic-anoxic operation. In the SBBR and MSBR system, the enhanced biological phosphorus removal (EBPR) was successfully achieved with higher N removal. The COD utilization in combined SBBR-MSBR system was significantly reduced compared to ordinary BNR (up to 3.1 g SCOD/g (N+P) and 1.6 g SCOD/g (N+P) with different C/N/P ratio). The results suggest that a dPAO process could effectively reduce carbon energy (=COD) requirement. The combination of oxic-SBBR and anaerobic-anoxic MSBR for dPAO utilization could be an attractive alternative to upgrade the process performance in weak sewage.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.566-572
• /
• 2007

Two hybrid catalysts for the direct synthesis of DME were prepared and the catalytic activity of these catalysts were investigated. The hybrid catalyst for the direct synthesis of DME was composed as the catalytic active components of methanol synthesis and dehydration. The methanol synthesis catalyst was formed from the precursor contained Cu and Zn, the methanol dehydration catalyst was used ${\gamma}-Al_2O_3$. As PM-CZ+D and CP-CZA/D, Two hybrid catalysts were prepared by physical mixing method (PM-CZ+D) and precipitation method (CP-CZA/D), respectively. PM-CZ+D was prepared by physically mixing methanol synthesis catalyst and methanol dehydration catalyst, CP-CZA/D was prepared by depositing Cu-Zn or Cu-Zn-Al components on ${\gamma}-Al_2O_3$. The crystallinity and the surface morphology of synthesized catalyst were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM) to investigate the physical property of prepared catalyst. And BET surface area by $N_2$ adsorption and the surface area of Cu by $N_2O$ chemisorption were investigated about the hybrid catalysts. In addition, catalytic activity of these hybrid catalysts was examined with varying reaction conditions. At that time, the reaction temperature of $250{\sim}290^{\circ}C$, the reaction pressure of 50~70 atm, the $[H_2]/[CO]$ mole ratio of 0.5~2.0 and the space velocity of $1,500{\sim}6,000h^{-1}$ were investigated the catalytic activity. From these results, it was confirmed that the reactivity of CP-CZA/D was higher than that of PM-CZ+D. When the conditions of reaction temperature, pressure, $[H_2]/[CO]$ ratio and space velocity were $260^{\circ}C$, 50 atm and 1.0, $3,000h^{-1}$ respectively, CO conversion using CP-CZA/D hybrid catalyst was 72% and the CO conversion of CP-CZA/D was more than 20% compared with the CO conversion of PM-CZ+D. It was known that Cu surface area of CP-CZA/D hybrid catalyst was higher than that of hybrid PM-CZ+D catalyst using $N_2O$ chemisorption. It was assumed that the catalytic activity was improved because Cu particle of hybrid catalyst prepared by precipitation method was well dispersed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.12
• /
• pp.1589-1598
• /
• 2008

The objective of this study was to investigate the effect of obesity on health by analyzing the factors which are related to obesity through the questionnaires on the dietary pattern, nutrient intake and physical measurements. The subjects, 419 college women aged 20 to 24 year-old, were randomly selected from Seoul and data were collected during March to May, 2008 and classified as under underweight, normal weight, and obesity groups according to BMI. However, weight, skeletal muscle mass, body fat mass, fat free mass, percentage of body fat, and waist to hip ratio showed significant differences among all the groups (p<0.05). In the obese group, 77.8% ate fat-rich foods such as galbi and samgyopsal more than two times per week, 66.7% ate vegetables other than kimchi (p<0.05) as compared to the underweight and normal groups by mini dietary assessment (p<0.05). The cholesterol intakes of the underweight, normal weight, and obese groups were $164.67{\pm}114.52mg/dL$, $143.31{\pm}99.58mg/dL$, and $121.92{\pm}54.91mg/dL$, respectively, and the obese group had a significantly lower intake than the other groups (p<0.05). The serum total cholesterol levels of the underweight, normal, and obese groups were $177.04{\pm}26.36mg/dL$, $189.46{\pm}29.05mg/dL$, and $170.00{\pm}12.75mg/dL$, respectively, and the obese group showed lower total cholesterol level than the other groups (p<0.05). The triacylglycerol level of the obese group ($132.00{\pm}64.60mg/dL$) was significantly higher than the other two groups (p<0.05). The HDL-cholesterol levels of the underweight, normal weight, and obese groups were $51.92{\pm}9.39mg/dL$, $59.20{\pm}13.53mg/dL$, and $43.00{\pm}8.98mg/dL$, respectively, showing that the obese subjects had significantly lower HDL-cholesterol levels as compared to the subjects in the other groups (p<0.05). The HDL-C/LDL-C ratios of the underweight ($0.52{\pm}0.45$) and normal weight ($0.59{\pm}0.23$) groups were higher than the ratio of the obese group ($0.41{\pm}0.06$). Total cholesterol were positively correlated with LDL-cholesterol (r=0.768, p<0.01), but triacylglycerol were adversely correlated with HDL-cholesterol. In conclusion, our results show that college-aged women in Seoul should be encouraged to amend their overall dietary habits, make a dietary plan that fits their individual needs, and maintain an effective exercise schedule.

• Journal of Korea Foundry Society
• /
• v.22 no.5
• /
• pp.265-270
• /
• 2002

A novel jewelry master pattern manufacturing process which reduce manufacturing steps by employing a Duraform rapid prototyping mold and a low melting alloy has been suggested. The novel process follows the steps of 'jewelry 3D CAD design ${\rightarrow}$ Durafrom RP mold ${\rightarrow}$ low melting alloy master pattern' while the previous process follows more complicated steps of 'jewelry idea sketch ${\rightarrow}$ detailed drawing ${\rightarrow}$ wax carving ${\rightarrow}$ flask ${\rightarrow}$ silver master pattern.' An upper and a lower part of molds have been manufactured of Duraform powder, of which melting point is $190^{\circ}C$. A maser pattern was manufactured by pouring a low melting alloy of Pb-Sn-Bi-Cd, so called Woods Metal, of which melting point is $70^{\circ}C$, into the mold. The master pattern is a shape of a disk of 20mm diameter that contains various design factors. The variations of dimensions, surface roughness, surface pore ratio were measured by an optical microscope, a surface roughness profilometer, and a Rockwell hardness tester. The pattern made of were maeasured by an optical microscope, a surface roughness profilometer, and a Rockwell hardness tester. The pattern made of low melting alloy has sufficient surface hardness, and surface pore ratio to be used as the jewelry master pattern.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.123-130
• /
• 2005

In this study, we evaluated the CH4 and CO conversion efficiencies over the oxidation catalysts for natural gas vehicle with lean-burn system. On the fresh catalyst, the conversion efficiency was increased when the loading of precious metal was increased. On the aged catalyst, the conversion efficiency was decreased as increasing the excess air ratio. We could confirm the measuring conversion efficiency of the unsteady state with the FTIR and that of steady state with the GC The temperature increasing ratio of unsteady state is acceptable from 3$^{\circ}C$/min. to 15$^{\circ}C$/min. for the evaluation of catalyst conversion performance , which has within the 4$\%$ of the difference of conversion efficiency. We observed a physical behavior of the thermal aged catalyst's surface using TEM and BET device. It was found that the precious metal was grown to the micro-scopic size by thermal aging process.