• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.20-24
• /
• 2009

TiC-derived carbon coatings have been synthesized at $600^{\circ}C$ temperature treatment with $H_2/Cl_2$ mixture gases. From Raman spectroscopy measurements, the modified layer was covered with carbon and the thick-ness of the layer was increased with increasing reaction time. And $I_D/I_G$ ratio was decreased with increasing reaction time. The superior tribological property was obtained from TiC reacted with $Cl_2$ gas for 2 hrs. And the tribological property measurements indicate that TiC-derived carbon layer has $0.9{\times}10_{-6}mm^3/Nm$ in wear coefficient and 0.13 in friction coefficient.

• Journal of Oriental Medical Thermology
• /
• v.1 no.1
• /
• pp.28-37
• /
• 2002

Stable Compression Fractures(SCF hereafter) are most often caused by trauma such as traffic accidents. These SCFs usually occur in the thoracic and lumbar regions of the spinal cord. Human life spans have increased as a result of medical advances, which in turn has led to an increase in the elderly population. SCFs are divided into the categories of stable and unstable. The categories are determined through X-rays and P/Ex tests. The D.I.T.I. is then used to diagnose the severity and prognosis of the fracture injuries, and it allows an objective evaluation of the symptoms. This author researched 40 patients who were treated at Wonkwang University Oriental Medical Center from October 1995 to December 1996. The patients were diagnosed by X-ray as having SCFs and treated primarily with acupuncture. Both the changes in D.I.T.I. and patients' self-diagnoses of their conditions before and after treatment yielded the meaningful results which have been presented here. 1. 75% of those who suffer from Stable Compression Fractures are 60 years of older. Of those, the ratio of male to female is 1 to 4. This is due in part to the fact that many elderly women seek Oriental medicine treatment for conditions associated with advanced age. 2. 53.3% of these injuries occurred between T11 and L2. 3. 65% of patients were hospitalized for 10 to 29 days, and then able to be treated on an outpatiens basis. 4. The D.I.T.I. results showed 50% below $0.2^{\circ}C$, 30% between 0.3 and $0.5^{\circ}C$, 10% between 0.5 and $0.7^{\circ}C$, 10% between 0.7 and $0.9^{\circ}C$, and 0% over $0.9^{\circ}C$. 5. The results of treatment using Modified Evaluation System in Thoracolumbar Vertebral Fractures Method showed that 55% of patients achieved excellent recovery and 40% achived good recovery. After comparing the D.I.T.I. results before and after treatment, we found 50% of patients showed excellent recovery $({\Delta}T{\leq}0.2)$ and 40% showed good recovery$(0.2<{\Delta}T{\leq}0.5)$.

• The Journal of Pediatrics of Korean Medicine
• /
• v.17 no.2
• /
• pp.37-53
• /
• 2003

Objective : To find risk factor and symptoms for transferred newborn from postpartum care center Method : We performed a follow-up study using medical record. Subjects comprised 188 neonates(include 4 twins) and 184 women in childbed who were hospitalized in oriental postpartum care center from January, 1, 2002 to December, 31, 2002. Result: Transferred newborn was total 24, N.V.D. 17, C.S. 7, male and female were 12 separately. The symptom of transfer was fever(16), diarrhea(4), jaundice(3), convulsion(1) Transferred number and rate was male 12(10.7%), female 12(15.8%). In delivery method, total normal vaginal delivery(N.V.D.) was 136 and transferred 17(12.5%), total cesarean section(C.S.) was 52 and transferred 7(13.5%). Transferred rank was N.V.D. female(17.9%). C.S. male(15.6%), C.S. female(10%), N.V.D.(8.6%). Of the 188 neonates. immature infants were 2 and transferred 1(50%), term infants were 184, transferred 23(12.5%), post-term infants were 2 and transferred none(0%). In age of women in childbed, transferred ratio was 15.4%(over 35), 15.2%(25-29), 10.5%(30-34). In fever,. C.S. infants were more transferred than N.V.D. and male infant had a tendency to transfer in later period of hospitalization and female in early period. It seems that transfer was related to abortion. In diarrhea, all was N.V.D. and their diagnosis was rotavirus. The average age of women in childbed was yonger(28.5). In jaundice, all was 1st, and average birth weight was lighter(3153g). The average age of women in childbed was older(30). In convulsion, birth weight was lighter(3153g), and age of women in childbed was older(30). Conclusion : There's any relation with sex and delivery method, birth weight and mother's age in transfer. But we cannot find any statistically significance. Further prospective studies are needed to find risk factors in transfer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.287-297
• /
• 2015

In concrete structural design provisons, there is a minimum allowable strain of steel to ensure a ductility of RC members and a c/d is limited for the same purpose in EC2. In general, a ductility capacity of RC members is evaluated by a displacement ductility which is a ratio of ultimate displacement to yield displacement, and it is necessary to calculate accurately a yield displacement and an ultimate displacement to evaluate a displacement ductility. But a displacement in members is affected by various member characteristics, so it is hard to calculate a displacement exactly. In this study, a displacement ductility is calculated by calculating a yield displacement and an ultimate displacement through a moment-curvature relationship. The main variables examined are concrete strength, yield strength, steel ratio, spacing of confinement, axial force ratio and concrete ultimate strain. As results, as a concrete strength is increased, a ductility displacement is increased. But as yield strength, steel ratio, spacing of confinement and axial force ratio are increased, a displacement ductility is decreased. And a displacement ductility is necessary to calculate a response modification factor (R) of columns for seismic design, so it is appeared that it is important to calculate a displacement ductility more accurately.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.545-560
• /
• 2019

During EPB TBM tunnelling, an appropriate application of additives such as foam and polymer is an essential factor to secure the stability of TBM as well as tunnelling performance. From the '90s, there have been many studies on the optimal injection of additives worldwidely contrary to the domestic situation. Therefore, in this paper, the foam, which is widely adopted for soil conditioning, was selected as an additive in order to investigate the effect of foam injection on TBM performance through a series of laboratory excavation tests. The excavation experiments were carried out on artificial sandy soil specimens with consideration of the variance of FIR (Foam Injection Ratio), FER (Foam Expansion Ratio) and $C_f$ (Surfactant Concentration), which indicate the amount and quality of the foam. During the tests, torque values were measured, and the workability of conditioned soil was evaluated by comparing the slump values of muck after each experiment. In addition, a weight loss of the replaceable aluminum cutter bits installed on the blade was measured to estimate the degree of abrasion. Finally, the foam injection ratio for the optimal TBM excavation for the typical soil specimen was determined by comparing the measured torque, slump value and abrasion. Note that the foam injection conditions satisfying the appropriate level of machine load, mechanical wear and workability are essential in the EPB TBM operational design.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.36-44
• /
• 2010

This study was performed to investigate the distribution and decomposition characteristics of organic matter in stream water and sewage effluent located in Gwangju. Average of dissolved organic carbon (DOC) to total organic carbon (TOC) ratio was approximately 73.9% in the Youngsan river system. The concentration of refractory dossolved carbon (RDOC) was 3.7 mg/L corresponding to 80.9% of the DOC. The ratio of recalcitrant organic carbon was relatively higher than that of biodegradable organic carbon in stream. Oxidation efficiencies in the stream were 45.0% for BOD, 63.0% for $COD_{Mn}$ and 106.5% for CODcr. In case of sewage effluent was 33.6%, 65.7% and 136.1% respectively. Mean decomposition rate ($K_d$) of Youngsan river mainstream, its tributary sites and sewage effluent were about $0.042\;day^{-1}$, $0.043\;day^{-1}$ and $0.028\;day^{-1}$, respectively and the difference was not significant between the mainstream and its tributary sites (t-test, p>0.05). $K_d$ of the sewage effluent was lower than that of stream water.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.759-764
• /
• 2018

3D porous carbon electrodes (cNPIM), prepared by solution casting of a polymer of intrinsic microporosity (PIM-1) followed by nonsolvent-induced phase separation (NIPS) and carbonization are presented. In order to effectively control the pore size of 3D porous carbon structures, cNPIM was prepared by varying the THF ratio of mixed solvents. The SEM analysis revealed that cNPIMs have a unique 3D macroporous structure having a gradient pore structure, which is expected to grant a smooth and easy ion transfer capability as an electrode material. In addition, the cNPIMs presented a very large specific surface area ($2,101.1m^2/g$) with a narrow micropore size distribution (0.75 nm). Consequently, the cNPIM exhibits a high specific capacitance (304.8 F/g) and superior rate capability of 77% in an aqueous electrolyte. We believe that our approach can provide a variety of new 3D porous carbon materials for the application to an electrochemical energy storage.

• Journal of Magnetics
• /
• v.2 no.1
• /
• pp.7-11
• /
• 1997

The dependence of magnetoresistance (MR) ratio on various variables like the thickness of the second Co layer, on the presence of cap layer, on deposition field (Hdep) and on annealing in Co/Cu/Co sandwiches was investigated. Spin-valve sandwiches were deposited on the corning glass by means of the 3-gun dcmagnetron sputtering at a 5 mTorr partial Ar pressure and room temperature. The deposition field was varied from 70 Oe to 720 Oe. The MR curve was measured by the four-terminal method with applied magnetic field up to 1000 Oe perpendicular to the direction of a current in the film plne. The MR ratio of glass/Fe(50${\AA}$)/Co(17${\AA}$)/Cu(24${\AA}$)/Cot(${\AA}$) fabricated by making 50 ${\AA}$ of Fe buffer layer has the maximum value of 8.2% when the thickness of the second Co layer was 17${\AA}$and the deposition field was 350 Oe. In the case of glass/Fe(50${\AA}$)/Co(17${\AA}$)/Cu(24${\AA}$)/Cot(${\AA}$) with Cu cap layer on top, the decrease in the MR ratio seemed to relate with the oxidation of the second Co layer. Samples prepared with deposition field showed greater MR ratios through the formation of more complete spin valve films. After annealing for 2 hours at 300$^{\circ}C$, the MR ratio of the samples prepared with deposition field decreased rapidly while the MR raito of the sample prepared without the field remained.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.2
• /
• pp.129-143
• /
• 2010

Objectives : This study examined search on how the obesity indices, that are largely used in clinics such as waist circumference(WC), body mass index(BMI) and waist-hip ratio(WHR), are related to the visceral fat that was measured from abdominal computed tomography(CT) and the ratio of visceral fat/subcutaneous fat. Then, two groups ware compared in order to find out which characteristics of ordinary adults relationship with the abdominal obesity. Two groups are divided as follows; ones who are obese based on the measurement of WC and the others who are obese based on the level of BMI. Methods : A group of 63 test subjects that were gathered in the oriental medical hospital of Kyung-Won university is divided into two groups; ones (n=51, general obesity; group A) who have $BMI{\geq}25$ and $WC{\geq}85$, and the others (n=12, abdominal obesity; group B) who have BMI<25 and $WC{\geq}85$. Then, each group's obesity indices, abdominal CT, lipid level, glucose, adiponectin, leptin and C-reactive protein(CRP) are compared. In addition, subjects are again divided into two to examine the characteristics; ones (n=14, visceral obesity; group C) with visceral obesity based on the ratio between visceral fat and subcutaneous fat measured through abdominal CT, and the others (n=38, non-visceral obesity; group D) who are obese but not viscerally obese. Results & Conclusions : As a measurement that applies abdominal visceral fat and subcutaneous fat, BMI and WC can be considered as an appropriate obesity index while WHR cannot appropriately apply the abdominal fat amount. Moreover, the study indicates that abdominal obesity group based on the ratio of visceral fat/subcutaneous fat has more significant difference than the abdominal obesity group based on the WC in case of blood lipid index.