• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.23-28
• /
• 2021

In this paper, we analyze the tracking errors of monopulse radar according to the JSR of retrodirective cross-eye and radar skin return signals. The cross-eye jammer gain(G_c) is used to calculate the radar tracking errors, and the relationship between the jammer gain and the JSR is represented mathematically. We analyze the radar tracking errors by varying the tracking angle and JSR. Analysis results of the phase difference(ϕ) and amplitude ratio(a) between the two jammer signals and the changing JSR show that the closer the phase difference of the two jammer signals is to 180, the greater the tracking error and it shows that if the JSR is above 20dB, the tracking errors no longer increase. This work presents an effective utilization of retrodirective cross-eye jammers through various tracking error analyses based on the JSR, tracking angles, two-jammer phase differences and amplitude ratios of two-jammer signals.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.802-807
• /
• 2012

The autothermal reforming of methane to syngas has been carried out in a reactor charged with both a Ni (15 wt%)-Ru (1 wt%)/$Al_2O_3$-MgO metallic monolith catalyst and an electrically-heated convertor (EHC). The standalone type reactor has a start-up time of less than 2 min with the reactant gas of $700^{\circ}C$ fed to the autothermal reactor. The $O_2/CH_4$ and $H_2O/CH_4$ ratio governed the methane conversion and temperature profile of reactor. The reactor temperature increased as the reaction shifted from endothermic to exothermic reaction with decreasing $H_2O/CH_4$ ratio. Also the amount of $CO_2$ in the products increases with increasing $H_2O/CH_4$ ratio due to water gas shift reaction. The 97% of $CH_4$ conversion was obtained and the reactor temperature was maintained $600^{\circ}C$ at the condition of $GHSV=10,000\;h^{-1}$ and feed ratio ($H_2O/CH_4=0.6$ and $O_2/CH_4=0.5$). In this condition, the maximum flow rate of the syngas generated from the reactor charged with 170 cc of the metallic monolith catalyst is $0.94\;Nm^3/h$.

• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.362-366
• /
• 1989

For the effective use of soymilk residue(SR), by-product of soymilk production, Wheat Doenjang made of Wheat flour-SR koji(WFSR koji) and soybean was manufactured. As the results, the contents of reducing sugar were increased till 50 days in all samples and decreased thereafter during aging of the mash. The contents of amino nitrogen were prominently increased till 50 days, but increasing ratio was slightly slowdowned thereafter. The higher the mixing ratio of SR was, the less the contents of reducing sugar and amino nitrogen were. The contents of total acid were also prominently increased till 40 days, but were slowdowned thereafter and the differences among all treatments were small. As the mixing ratio of SR was increased, the yellowness and the redness were increased and the lightness was decreased in 80 days aged samples. In sensory evaluation of 90 day aged samples, control [WFSR koji 100 (WF: SR ; 100 : 0), soybean 100] was the best in soy sprout Doenjang soup. As the mixing ratio of SR was increased, the taste was dropped slightly but no significant differences were obtained between control and sample A[WFSR koji 125 (WF: SR ; 100 : 25), soybean 75], sample B[WFSR koji 150(WF: SR ; 100 : 50), soybean 50] and sample C[WFSR koji 175 (WF: SR ; 100 : 75), soybean 25], sample C and sample D[WFSR koji 200(WF: SR ; 100 : 100), soybean 0].

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.535-540
• /
• 1990

Bacitlus sphaericus ts-Dl290 was characterized comparatively with the wild type strain 1593 by themeasurements of the biosynthesis of total DNA, RNA and protein on the temperature-shift culturesat permissive temperature of $30^{\circ}C$ and at nonpermissive temperature of $42^{\circ}C$. The growth patterns of the wild type strain and ts-Dl290 were similar at $30^{\circ}C$, but at 4Z C the mutant almost did not grow (temperature-sensitivity). When the growth temperatures of both stains were shifted-up from $30^{\circ}C$ to $42^{\circ}C$ after a 4 hour culture, their growths were normal, but when shifted-down from $42^{\circ}C$ to $30^{\circ}C$ after a 4 h culture, the mutant did not grow. When shifted up from $30^{\circ}C$ to $42^{\circ}C$ after a 4 hculture, the DNA syntheses of the two strains were at a normal rate for 1 h, but after 1 h the biosynthesesdecreased. The rate of DNA synthesis of the wild type strain at the nonpermissive temperature was about 93%, and that of the mutant was about 50% of the ratio of the wild type strain, and the RNA synthesis of the wild type strain was maintained for 3 h, and that of the mutant for 2 h. Thereafter the RNA synthesis decreased, and the synthesis of proteins in the both strains were similarlykept high for 8 h. The reversibility of the DNA synthesis of the mutant at $42^{\circ}C$ was lessened whenthe culture times were increased.re times were increased.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.3
• /
• pp.120-125
• /
• 2018

The PMMA composited material mixed with alumina studied to find the optimal condition, the adequate ratio of mixing, for the associated mechanical properties such as anti-corrosive, weatherproof performance. The 80% of hardness and 52% of scratch coefficient improved according to increasing ratio of alumina, which is mostly 3 times higher than that of pure PMMA, on other hand 16% of tensile strength and 35% of flexural strength has lost while alumina was adding in. The most proper ratio, having the best availability in substantial production, of composite between pure PMMA and alumina is determined as 93 wt. % vs 7 wt. %. Results of related five properties had estimated by using of a pentagram.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.385-388
• /
• 1999

This study is to investigate experimentally the shear capacity of high-strength reinforced concrete beams subjected to monotonic loading. Nine reinforced concrete beams using high strength concrete $(f'c=380kg/\textrm{cm}^2)$ are tested to determine their diagonal cracking and ultimate shear capacity. The main variables are shear span-depth ratio a/d=1.5, 2.5, 3.5, and shear reinforcement ratio. All specimens are 170mm wide and have a total depth of 300mm. The test results indicate that ACI 318-95(b) Code for shear capacity gave closest agrement with the exsprimental results. The beams with a shear spear-depth ratio 1.5 and 2.5. ACI 318-95 Code underestimates shear strength carried by vertical shear reinforcements.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.436-439
• /
• 2007

This paper describes the optimization of PGS(Patterned Ground Shield) of 5.5 turns rectangular spiral inductor using Taguchi's method. PGS is decrease method of parasite component by silicon substrate among dielectric loss reduction method. By using the taguchi's method, each parameter is fixed upon that PGS high poison(A), slot spacing(B), strip width(C) and overlap turn number(D) of PGS design parameter. Then we verified that percentage contribution and design sensitivity analysis of each parameter and level by signal to noise ratio of larger-the-better type. We consider percentage contribution and design sensitivity of each parameter and level, and then verify that model of optimization for PGS is lower inductance decreasing ratio and higher Q-factor increasing ratio by EM simulation.

• Journal of computational fluids engineering
• /
• v.5 no.3
• /
• pp.1-7
• /
• 2000

In high-pressure diesel engine, the injected fuel spray impinges on the piston cavity surface due to the short distance between the injection nozzle and the cavity wall. The behavior of the impinging spray has the great influence on the dispersion of fuel, the evaporation, and the mixture formation process. In this study, the numerical simulation using the GTT code was performed to study the gas flows, the spray behaviors, and the fuel vapor distributions in the combustion of a D.I engine for variation of spray angle and swirl ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.220-225
• /
• 1993

This paper is an experimental study on shear capacity of the high strength lightweight reinforced concrete beams with shear-depth ratio between 1.5 and 2.5. Thirteen T & rectangular beams were tested to determine their diagonal cracking and ultimate shear capacity. The major variables are shear span-depth ratio (a/d=1.5, 2.0, 2.5), concrete compressive strength(f'c=210, 24., 270㎏/㎠) and tensile steel ratio( =0.6, 1.2%). Based on results obtained from experiment of high strength lightweight reinforced concrete Beam & normal concrete, the following conclusions were drawn. (1) The shear capacity of high-strength lightweight concrete is less 15% than that of normal concrete under same condition. (2) As the results of Comparing this experimental datas with other various formulas. It is regarded that ACI 318-89 shear strength formula related tensile strength is proper to design formula of shear strength of high-strength lightweight reinforced concrete using lightweight concrete.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.233-236
• /
• 2002

The high-pressurized spray nozzle is used f3r special washing and cutting with strong impact force. The performance of this nozzle, which focused on spray penetration and radial dispersion, was mainly investigated to maximize the momentum and minimize the flow loss. Hence, our experimental research was conducted by changing the aspect ratio ranging from 0 to 3 with nozzle outlet of 1.1. The spray trajectory far high-pressurized water was experimentally investigated using PDPA diagnostics, which was available at spray downstream region. As the spray at upstream near the nozzle exit did not show the improved disintegration. The results showed empirical correlation with regard to non-dimensional axial velocity distribution, spray penetration, and radial spreading rate with photographic visualization.