• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.41.2-41.2
• /
• 2016

The follow-up BVRI photometric observations of NSVS 1461538, which was discovered as an $Algol/{\beta}$ Lyr eclipsing variable by Hoffman, Harrison & McNamara (2009), were performed for three years from 2011 to 2013 by using the 61-cm telescope and CCD cameras of Sobaeksan Optical Astronomy Observatory (SOAO). New light curves have deep depths both of the primary and secondary eclipses, rounded shapes outside eclipses and a strong O'Connell effect, indicating that NSVS 1461538 is a typical W UMa close binary system rather than an $Algol/{\beta}$ Lyr type binary star. A period study with all the timings shows that the orbital period may vary in a sinusoidal way with a period of about 5.6 yr and a small semi-amplitude of about 0.008 d. The cyclical period variation was interpreted as a light-time effect due to a tertiary body with a minimum mass of $0.66M{\odot}$. The first photometric solution with the Wilson-Devinney binary model shows that the system is a W-subtype contact binary with the mass ratio ($q=m_c/m_h$) of 3.46, orbit inclination of 85.6 deg and fill-out factor of 30%. From the existing empirical relationship between parameters, the absolute dimension was estimated. The masses and radii of the component stars are $0.28M{\odot}$ and $0.71R{\odot}$ for the less massive but hotter primary star, respectively, and $0.96M{\odot}$ and $1.21R{\odot}$ for the more massive secondary, respectively. Possible evolution of the system is discussed in the mass-radius and the mass-luminosity planes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1659-1666
• /
• 2010

In this study, a new type of wire-woven cellular metal named WBD(wire-woven bulk diamond) was developed. Like WBK(wire-woven bulk Kagome), WBD is composed of helically formed wires; WBK was introduced a few years ago, and its mechanical, thermal properties, and engineering applications have been extensively investigated. The number of wires that pass by one another at each cross point in WBD is four, whereas that in WBK is three. The mechanical behavior of WBD subjected to compression was investigated and the results were compared to those for WBK. For a given slenderness ratio the density and yield strength of WBD were about twice as high as those for WBK, but elastic stiffness of WBD was not that higher than that for WBK.

• YAKHAK HOEJI
• /
• v.59 no.5
• /
• pp.207-214
• /
• 2015

P2Y receptors, a type of P2 receptor family, are G-protein coupled receptors and 8 subtypes have been characterized ($P2Y_1$, $P2Y_2$, $P2Y_4$, $P2Y_6$, $P2Y_{11-14}$). Recently, several studies have shed light on the role of P2Y receptors in bone biology. Among them, little is known on the role of $P2Y_6$ receptor on osteoclast differentiation. Thus, we investigated the role of $P2Y_6$ receptor on osteoclastogenesis using $P2Y_6$ receptor selective antagonist, MRS 2578. When osteoblasts and bone marrow cells were co-cultured in the presence of $VitD_3$ and $PGE_2$, $P2Y_6$ antagonist increased the formation of TRAP positive osteoclasts. To elucidate the target cells of $P2Y_6$ antagonist, we first checked the effect of MRS 2578 on osteoblasts. Treatment of MRS 2578 did not affect OPG : RANKL mRNA ratio in osteoblasts. Next, we checked the effects of $P2Y_6$ antagonist on osteoclast precursors using mouse bone marrow macrophages (BMMs). Addition of MRS 2578 increased the number of osteoclasts in RANKL-treated BMMs. Although $P2Y_6$ antagonist had no effect on RANKL-induced NFATc1, c-Fos and MafB expression levels, it significantly stimulated RANKL-induced Blimp1 mRNA expression in BMMs. Taken together, these data indicate that $P2Y_6$ antagonist increases osteoclast formation by upregulation of Blimp1 expression.

• Journal of Plant Biology
• /
• v.29 no.1
• /
• pp.41-51
• /
• 1986

The plants of Nicotiana tabacum L. cv. NC2326 were germinated in 10 cm D$\times$20 cm H polyethylene pot, and sand-cultured with Hoagland solution near by the window of laboratory room(26$\pm$5$^{\circ}C$). The growing plants were sprayed with various concentrations of ABA around 9 : 00 a.m. once in every two days for 12 weeks in summer. As the results, frequency of stomatal number, stomatal opening, chlorophyll content, respiration rate, and protein content in the leaves were decreased with the increasing of concentrations of ABA, respectively. The plant growth was inhibited by exogenous ABA, but leaf abscission was not found during the experimental period. The ratio of three to one in chlorophyll a to b was not altered by exogenous ABA. All the stomata were closed within three minutes by 100 $\mu\textrm{g}$ ml-1 ABA and within seven minutes by 1-10 $\mu\textrm{g}$ ml-1 ABA after the spraying of ABA, and then reopended after a few hours in 1-10 $\mu\textrm{g}$ ml-1 ABA and after 24 hours in 100 $\mu\textrm{g}$ ml-1 ABA. The polar movement of chloroplast within the guard cells was found in the higher concentrations of 10 and 100 $\mu\textrm{g}$ ml-1 ABA, but not found in the lower concentrations than 1 $\mu\textrm{g}$ ml-1 ABA. During the night and weak light, it was fond that the inhibition of respiration rate by the higher concentration of ABA was owing to firstly the stomatal closure by the spraying of ABA and secondly the decrease of stomatal frequency by the inhibition of stomatal development with exogenous ABA for the long period of 12 weeks. In the band number of leaf protein by the electrophoresis, most of the protein bands were disappeared by the higher concentration of 100 $\mu\textrm{g}$ ml-1 ABA, but were not altered by the lower concentration of ABA in comparison with control.

• Publications of The Korean Astronomical Society
• /
• v.27 no.3
• /
• pp.71-80
• /
• 2012

We have developed superconducting mixer receivers for 129 GHz VLBI observation in Korean VLBI Network (KVN). The developed mixer has a radial waveguide probe with simple transmission line L-C transformer as a tuning circuit to its 5 series-connected junctions, which can have 125 - 165 GHz as the operation radio frequency (RF). For intermediate frequency (IF) signal path a high impedance quarter-wavelength line connects the probe to one end of symmetric RF chokes. The double side band (DSB) receiver noise of the mixer was about 40 K over 4 - 6 GHz IF band, whereas we achieved the uncorrected single side band (SSB) noise temperature of about 70 K and better than 10 dB image rejection ratio in 2SB configuration with 8 - 10 GHz IF band. Insert-type receiver cartridges employing the mixers have been under commission for KVN stations.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.327-333
• /
• 2011

Nanostructured cobalt materials have recently attracted considerable attention due to their potential applications in high-density data storage, magnetic separation and heterogeneous catalysts. The size as well as the morphology at the nano scale strongly influences the physical and chemical properties of cobalt nano materials. In this study, cobalt nano particles synthesized by a a polyol process, which is a liquid-phase reduction method, were investigated. Cobalt hydroxide ($Co(OH)_2$), as an intermediate reaction product, was synthesized by the reaction between cobalt sulphate heptahydrate ($CoSO_4{\cdot}7H_2O$) used as a precursor and sodium hydroxide (NaOH) dissolved in DI water. As-synthesized $Co(OH)_2$ was washed and filtered several times with DI water, because intermediate reaction products had not only $Co(OH)_2$ but also sodium sulphate ($Na_2SO_4$), as an impurity. Then the cobalt powder was synthesized by diethylene glycol (DEG), as a reduction agent, with various temperatures and times. Polyvinylpyrrolidone (PVP), as a capping agent, was also added to control agglomeration and dispersion of the cobalt nano particles. The optimized synthesis condition was achieved at $220^{\circ}C$ for 4 hours with 0.6 of the PVP/$Co(OH)_2$ molar ratio. Consequently, it was confirmed that the synthesized nano sized cobalt particles had a face centered cubic (fcc) structure and with a size range of 100-200 nm.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.192-197
• /
• 2009

Carbon nanotubes (CNT) were used as a catalyst support where catalytically active Pd and Pt metal particles decorated the outside of the external CNT walls. In this study, Pd and Pt nanoparticles supported on $HNO_3$-treated CNT were prepared by microwave-assisted heating of the polyol process using $PdCl_2$ and $H_2PtCl_6{\codt}6H_2O$ precursors, respectively, and were then characterized by SEM, TEM, and Raman. Raman spectroscopy showed that the acid treated CNT had a higher intensity ratio of $I_D/I_G$ compared to that of non-treated CNT, indicating the formation of defects or functional groups on CNT after chemical oxidation. Microwave irradiation for total two minutes resulted in the formation of Pd and Pt nanoparticles on the acid treated CNT. The sizes of Pd and Pt nanoparticles were found to be less than 10 nm and 3 nm, respectively. Furthermore, the $SnO_2$ films doped with CNT decorated by Pd and Pt nanoparticles were prepared, and then the $NO_2$ gas response of these sensor films was evaluated under $1{\sim}5\;ppm$ $NO_2$ concentration at $200^{\circ}C$. It was found that the sensing property of the $SnO_2$ film sensor on $NO_2$ gas was greatly improved by the addition of CNT-supported Pd and Pt nanoparticles.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.60-67
• /
• 1997

This paper presents the results of 3rd wind tunnel test for the wings of WIG R/C test models, 'Hanjin-1' & 'Hanjin-2'. We made 'Hanjin-1' in last May 1995 and had a success in test flight. And in order to grasp the aerodynamic characteristics of wings in ground effect, the measurements of lift and drag were carried out for the various kinds of wing. It was shown that lift and lift-drag ratio increase with decrease of the clearance, but the feature was considerably depended on the shape of wing section. In this case we select the three kind of wing. section, and then compare their characteristics especially for a stability in longitudinal motion. They are NACA6409 for 'Hanjin-1' and the two kinds of DHMTU for ekranoplans of Russia. Experimental results show that the pitching moments of DHMTU wing sections are smaller than NACA6409.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1327-1334
• /
• 1988

In this study rotating bending fatigue tests have been carried out with the deep non-through radial holed notch specimens of low carbon steels(SM 22C). It is investigated that the behaviors of surface and interior fatigue crack propagation and the variations of the shape of the cracked surface on the magnitude of bending stresses. The Obtained results are summarized as follows. (1) The relations between [Crack length] and [Cycle ratio] are expressed by following eq. in the 0.1~0.6 range of N/ $N_{f}$ long[ crack length] = A + B [N/ $N_{f}$ ] In case of surface crack length, values of A and B are uniformed independent upon the magnitude of bending stress, but those are variable according to the magnitude of bending stress for interior crack length. (2) The following eq. is derived on the surface crack propagation rate, bending stress and surface crack length. (dl/dN)=(3.94*10$^{-12}$ ).sigma.$^{4.54}$l (3) Under small stress, interior crack propagation rate increase with the interior crack growth but it decrease for large stress. (4) The shape of cracked surface depends upon the magnitude of bending stress. Under small stress fatigue crack propagates as an semi-ellipse with semi-major axis of surface crack length with semi-major axis of interior crack length for large stress.s.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.386-390
• /
• 2015

Fe-base superalloy powders with $Y_2O_3$ dispersion were prepared by high energy ball milling, followed by spark plasma sintering for consolidation. High-purity elemental powders with different Fe powder sizes of 24 and 50 mm were used for the preparation of $Fe-20Cr-4.5Al-0.5Ti-O.5Y_2O_3$ powder mixtures (wt%). The milling process of the powders was carried out in a horizontal rotary ball mill using a stainless steel vial and balls. The milling times of 1 to 5 h by constant operation (350 rpm, ball-to-powder ratio of 30:1 in weight) or cycle operation (1300 rpm for 4 min and 900 rpm for 1 min, 15:1) were applied. Microstructural observation revealed that the crystalline size of Fe decreased with an increase in milling time by cyclic operation and was about 15 nm after 3 h, forming a FeCr alloy phase. The cyclic operation had an advantage over constant milling in that a smaller-agglomerated structure was obtained. The milled powders were sintered at $1100^{\circ}C$ for 30 min in vacuum. With an increase in milling time, the sintered specimen showed a more homogeneous microstructure. In addition, a homogenous distribution of Y-compound particles in the grain boundary was confirmed by EDX analysis.