• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.26-29
• /
• 2008

Recently, the hydroforming of high strength aluminum tubes has many studies and applications in manufacturing industry, especially in automotive industry. But high strength aluminum tube has limited expansion capability at most 15% at normal temperature. New manufacturing process, called hot air forming, is introduced to apply aluminum tube to the automotive sub frame components which have complex shape and require high expansion ratio about 40%. The process is carried out at the elevated temperature above $500^{\circ}C$, so numerous material properties and process parameters related to high temperature should be investigated and determined to get a sound product. In this paper, the hot air forming process of automotive sub frame was investigated. The effect of the forming parameters such as the temperature of tool, axial feeding and gas pressure are analyzes by using explicit finite element method.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.2
• /
• pp.143-148
• /
• 2000

The occurrence of Anagyrus kamali, a solitary endoparasite of the mealybug, Maconellicoccus hirsutus has been reported for the first time from India. The parasitoid was fecund to parasitizing the field population of mealybug to the tune of 10.37 to 42.70% in different months. A comprehensive study on the development of the parasitoid on different stages of mealybug indicated that the parasitoid was able to complete its development in all the stages. Higher parasitism (67.48-78.08%) and more female progeny were observed when 3rd instar nymphs and adult female of the mealybug were exposed to the parasitoid. The biology of A. kamali studied at 25${\pm}1^{\circ}C$ temperature and 60${\pm}$$\pm$1.12 days. The duration of egg, larva (3 instars) and pupa were 2.67${\pm}$${\pm}$${\pm}$${\pm}$

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.194-204
• /
• 2002

In this paper, a new two-phase space vector RPWM(Random PWM) is proposed. In the proposed RPWM, each of two-phase PWM pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the randomization of the PWM pulses, we can obtain the effects of spread spectra of inverter output voltage, d.c link current and audible switching acoustic noise as in the case of randomly changed switching frequency. To verily the validity of the proposed two-phase RPWM scheme, the experiment based on the Cl67 micro-controller was executed. The performance of the proposed scheme was compared with traditional PWM schemes experimentally.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.1
• /
• pp.119-132
• /
• 2010

Objectives : The purpose of this study is to compare interrelations between stress and muscles of neck through stress response inventory(SRI), 7 zone diagnostic system and surface electromyography(sEMG). Methods : This study was carried out with the data from SRI, 7 zone diagnostic system and sEMG. First subjects were divided into two group according to the SRI points. subjects in group A had points of SRI in which lower than 30 points. Subjects in group B had points of SRI in which higher than 30 points. And subjects were divided into nonstress group(Group C) and stress grouop(Group D) according to the result of 7 zone diagnostic system. Then we investigated how to differentiate the muscle contraction, fatigue, recovery and asymmetry ratio on sEMG for each groups. Results : In this study, the muscle contraction of both upper trapezius muscle and left sternocleidomastoid muscle and left scalene muscle in stress group were higher than nonstress group significantly. And the muscle recovery of left sternocleidomastoid muscle and left scalene muscle in stress group were higher than nonstress group significantly. Conclusions : This results show that the stress was associated with muscle condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.4
• /
• pp.450-454
• /
• 1998

Four groups each containing 48 seven-day-old broiler chicks were reared for 7 weeks during winter on rice husk litter spread to depths of 20, 30, 40 or 50 mm. Broiler performance was evaluated in terms of weight gain, feed consumption, feed efficiency and production number. Litter dampness was determined and coccidial oocyst populations were counted at different weeks of age. The depth of litter did not significantly affect live weight gain, feed consumption, feed conversion ratio, liveability or production number. Variation in moisture contents of litter was observed but the coccidial oocysts count per gramme of litter was within the safety level and therefore, there was no outbreak of coccidiosis in any group. Use of rice husk litter at different depths (20 to 50 mm) did not cause any breast blisters or leg abnormalities. It was concluded that rice husk can be used as litter at depths of between 20 and 50 mm during winter to raise broilers without affecting performance characteristics and health of birds.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.667-684
• /
• 2020

In this article, the static responses of layered magneto-electro-thermo-elastic (METE) plates in thermal environment have been investigated through FE methods. By using Reddy's third order shear deformation theory (TSDT) in association with the Hamilton's principle, the direct and derived quantities of the coupled system have been obtained. The coupled governing equations of METE plates have been derived through condensation technique. Three layered METE plates composed of piezoelectric and piezomagnetic phases are considered for evaluation. For investigating the correctness and accuracy, the results in this article are validated with previous researches. In addition, a special attention has been paid to evaluate the influence of different electro-magnetic boundary conditions and pyrocoupling on the coupled response of METE plates. Finally, the influence of stacking sequences, magnitude of temperature load and aspect ratio on the coupled static response of METE plates are investigated in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.118.2-118.2
• /
• 2016

3D NAND 제조에 있어 high-aspect-ratio etch 공정을 견뎌낼 수 있는 hardmask 소재로서 amorphous carbon layer (ACL) 가 각광받고 있으며 hardmask로서의 특성을 향상시키기 위해 다양한 연구가 진행중에 있다 [1]. 본 연구팀의 기존 연구에서 질소 및 붕소 doping 된 ACL 박막의 etch rate 및 Raman 분석을 통해 박막 특성을 확인한 바 있었으나, 공정 중 arcing이 일어나는 등 의도치 않은 문제로 인해 공정 최적화에 일부 문제가 존재하였다. 본 연구에서는 plasma enhanced chemical vapor deposition (PECVD) 공정을 통해 C6H12 기체 및 doping을 위한 NH3 와 B2H6 두 기체를 이용하여 특성 개선된 ACL을 증착하는 과정에서 발생하는 arcing 및 증착 특성을 규명하고자 진공 내 입자의 수농도를 실시간 측정할 수 있는 particle beam mass spectrometer(PBMS)를 적용, 특정 공정 사건 진단 및 해당 사건에서 발생하는 입자를 분석, 증착된 박막의 Raman spectroscopy 결과와 비교 분석하였다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.609-612
• /
• 1998

Pyroelectric properties of rhombohedral $Pb(ZrxTi_1-x)O_3ceramics$ with various Zr/Ti ratios of 84/16, 87/13, 90/10, and 93/7 are investigated using dynamic method. The response characteristics of PZT samples are examined by considering frequency dispersion. Since the reorientation of the grain does not the influence on the increase of frequency at low frequency (2~200Hz), the maximum pyroelectric response can be obtained with the change of spontaneous polarization. However, the pyroelectric response of PZT samples could be reduced as the spontaneous polarization decreases due to the restrain of the reorientation of the grain with the increasing of requency at high frequency (200~2000Hz). We have obtained the good pyroelectric response in the PZT sample having 84/16 Zr/Ti ratio, then the pyroelectric coefficient (${\gamma}$) and the figure of merit (FV) were $17.3nC/\textrm{cm}^2K$ and 2.28$\times$10-11Ccm/J, respectively. The noise equivalent power (NEP), the detectivity (D*) were 1.21$\times$10-7W/Hz$\frac{1}{2}$ and 8.26$\times$106cmHz$\frac{1}{2}$/W, respectively.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.355-359
• /
• 2001

This paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with DTC. The control system consists of stator flux observer, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP controller by using fully integrated control software. The stator flux observer is based on the combined voltage and current model with stator flux feedback adaptive control that inputs are current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated by observed stator flux-linkage space vector. The estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operating area. It does not require the knowledge of any motor parameters, nor particular care for motor starting, In order to prove the suggested control algorithm, we have a simulation and testing at actual experimental system. The developed sensorless control system is shown a good speed control response characteristic results and high performance features in 50/1000 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.161-168
• /
• 1999

A series of centrifuge model tests were performed in order to investigate the behaviors of various tunnel linings. A 1/100-scaled aluminum and hydrostone horseshoe tunnel linings with a radius km, height km were buried in a depth of C/D=3 with dry Joomunjin standard sand, the relative density of which was 86%. Bending moments and thrusts along the tunnel circumference were measured by 12 strain gages. Earth pressures in soil and on lining were estimated by pressure transducers, ground surface settlements at center and edges by using LVDTs. Average Ko(coefficient of earth pressure at rest) was 0.39 for the model sand. The structural behaviors of lining depended on its damaged conditions. But, as a rule, on the crown, the tensile circumferential strain of lining occurred at the inner surface, and the compressive at the outer surface, then positive bending moment was created at the crown. The circumferential strain of the inner surface on the springline was tensile, and the outer compressive, so negative bending moment was measured at the springline. For hydrostone linings, cracks initiated at the inner surface on the crown, and the outer on the springline over average 40g.