• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.1
• /
• pp.131-139
• /
• 2014

This study was performed to determine the effect of dietary supplementation of procyanidin on growth performance, blood characteristics, and immune function in growing pigs. In experiment 1 (Exp. 1), thirty-two crossbred pigs with an initial BW of $19.2{\pm}0.3$ kg were allocated into 4 treatments for an 8-wk experiment: i) CON (basal diet), ii) MOS 0.1 (basal diet+0.1% mannanoligosaccharide), iii) Pro-1 (basal diet+0.01% procyanidin), and iv) Pro-2 (basal diet+0.02% procyanidin). Pigs fed Pro-1 and Pro-2 diets had greater (p<0.05) gain:feed ratio compared with those fed CON or MOS 0.1 diets. Serum creatinine concentration was less (p<0.05) in Pro-2 treatment than those in CON, MOS 0.1 and Pro-1 treatments. In Exp. 2, twelve pigs (BW $13.4{\pm}1.3$ kg) received basal diet with i) 0 (CON), ii) 0.02% (Pro-0.02%), and iii) 0.04% procyanidin (Pro-0.04%) for 4 wk. Concentration of platelets was lower (p<0.05) in the Pro-0.04% group compared to CON at 24 h after lipopolysaccharide (LPS) challenge. In addition, secretion of cytokines from cultured peripheral blood mononuclear cells (PBMC) in the presence or absence of procyanidin was examined. The levels of interleukin (IL)-$1{\beta}$, IL-6 and tumor necrosis factor (TNF)-${\alpha}$ were lower (p<0.05) in Pro (LPS-stimulated PBMCs+procyanidin) than those in CON (LPS-stimulated PBMCs+PBS) at 4 h after LPS challenge. These data suggest that dietary addition of procyanidin improves feed efficiency and anti-inflammatory cytokines of pigs.

• Journal of Hydrogen and New Energy
• /
• v.13 no.1
• /
• pp.34-41
• /
• 2002

CdS and $TiO_2$ nanoparticles were made by the precipitation method and sol-gel method, respectively, and they were mixed mechanically and then treated with the hydrothermal processing. CdS-$TiO_2$ composite particulate films were thus prepared by casting CdS-$TiO_2$ mixed sol onto $SnO_2$ conducting glass and a subsequent heat-treatment at $400^{\circ}C$. Again, the physico-chemical and photoelectrochemical properties of these films were controlled by the surface treatment with $TiCl_4$ aqueous solution. The photocurrents and the hydrogen production rates measured under the present experimental conditions varied in the range of $3.5{\sim}4.5mA/cm^2$ and $0.3{\sim}1.8cc/cm^2$-hr, respectively, and showed the maximum values at the $CdS/[CdS+TiO_2]$ mole ratio of 0.2. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, Probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$ It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.375-383
• /
• 2005

An experiment was conducted to study the protective role of polyherbal feed supplement (Growell) during induced mycotoxicosis in broilers. A total of 240 Vencobb broilers were divided at day old stage into eight equal groups. Group A served as control and was given plain feed, group B, D, F and H were given Growell at 0.35 g/kg of feed. Group C, D, G and H were given dietary aflatoxin $B_1$ at 0.2 ppm and groups E, F, G and H were given ochratoxin A at 0.2 ppm in feed to study effect of Growell on individual aflatoxicosis, ochratoxicosis and combined mycotoxicosis of broilers. The chicks were given their respective feeds from 1st day to 6th week of age and were vaccinated at 7th and 28th day of age with Lasota strain of Newcastle disease virus. There was no statistically significant effect of mycotoxins individually or in combination on body weight of broilers. However, body weights were highest in group B and lowest in co-mycotoxicated group G. Feed conversion ratio was best in group B followed by A, D, F, E, H and G. Significant improvement in haemoglobin values was observed in broilers due to feeding of Growell in ochratoxin and co-mycotoxicated groups. There was no significant effect of mycotoxin treatment on PCV, TEC and TLC of broilers. Due to single and combined mycotoxicosis, there was reduction in serum total protein, albumin, cholesterol and triglyceride and rise in alkaline phosphatase, creatinine and uric acid levels. Supplementation of diets with Growell reduced the alterations induced due to mycotoxins. There was a significant rise in per cent organ weight of liver and reduction of that of spleen, bursa of Fabricius and thymus of broilers fed mycotoxins. Protection from alteration in per cent organ weight of these organ by supplementation of Growell was recorded. The observed impaired immune response and histopathological changes in liver, kidney, spleen, bursa of Fabricius and thymus of broilers given mycotoxins were protected by supplementation of Growell.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1077-1084
• /
• 2006

This paper proposed a fast algorithm to reduce the amount of calculation for inter prediction which takes a great deal of the operational time in H.264/AVC. This algorithm decides a search range according to the direction of predicted motion vector, and then performs an adaptive spiral search for the candidates with JM(Joint Model) FME(Fast Motion Estimation) which employs the rate-distortion optimization(RDO) method. Simultaneously, it decides a threshold cost value for each of the variable block sizes and performs the motion estimation for the variable search ranges with the threshold. These activities reduce the great amount of the complexity in inter prediction encoding. Experimental results by applying the proposed method .to various video sequences showed that the process time was decreased up to 80% comparing to the previous prediction methods. The degradation of video quality was only from 0.05dB to 0.19dB and the compression ratio decreased as small as 0.58% in average. Therefore, we are sure that the proposed method is an efficient method for the fast inter prediction.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.215-221
• /
• 2016

In this study, the utilization of the by-products of various industries was examined using raw materials of CSA high-functional cement such as coal bottom ash, red mud, phosphate gypsum, etc. Technology to improve energy efficiency and reduce $CO_2$ was developed as part of the manufacturing process; this technology included lower temperature sintering ($150{\sim}200^{\circ}C$) than is used in the OPC cement manufacturing process, replacement of CSA cement with the main raw material bauxite, and a determination of the optimum mix condition. In order to develop CSA cement, a manufacturing system was established in the Danyang plant of the HANIL Cement Co. Ltd., in Korea. About 4,200 tons of low purity expansion agent CSA cement (about 16%) and about 850 tons of the lime-based expansion agent dead burned lime (about 8%) were produced at a rate of 60 tons per hour at the HANIL Cement rotary kiln. To improve the OPC cement properties, samples of 10%, 13%, and 16% of CSA cement were mixed with the OPC cement and the compressive strength and length variation rate of the green cement were examined. When green cement was mixed with each ratio of CSA cement and OPC cement, the compressive strength was improved by about 30% and the expansibility of the green cement was also improved. When green cement was mixed with 16% of CSA cement, the compressive strength was excellent compared with that of OPC cement. Therefore, this study indicates the possibility of a practical use of low-cost CSA cement employing industrial wastes only.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1239-1245
• /
• 2005

In this paper, a new predistortion linearizer using second harmonic components feedforwarding is proposed. The harmonic generator of the proposed predistorter that consists of a small signal amplifier extracts second harmonic signals. A vector modulator that modulate fundamental signal with second harmonic signals, generates the inverse third order intermodulation distortion signals and controls amplitude/phase of them with modulation factors. As a result, this linearizer is suppressed IMD3 signals of power amplifier effectively. The test results show that the third order IMD of power amplifier is suppressed more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 5 dB for CDMA(IS-95) 4FA signals.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.141-150
• /
• 2014

This study was conducted to determine the effects of hempseed (H) on performance, carcass traits, and antioxidant activity in Japanese quail (Coturnix coturnix japonica). A total of 192 quail with seven-days old were divided into four experimental groups with four replicates. The treatments were; i) Control diet (C, no hempseed); ii) 5% hempseed in diet (H5); iii) 10% hempseed in diet (H10); and iv) 20% hempseed in diet (H20). The body weight (BW) and feed intake (FI) of quail was determined at 7, 21 and 42 d of age. At 42 d of age four quail were slaughtered and the carcass and internal organ traits were determined. Malondialdehyde (MDA), catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), nitric oxide (NO) and total protein were determined in the blood serum end of the experiment. The BW of the groups were not significant at 7 and 21 d, however in the 20% hempseed group BW decreased at 42 d (p<0.05). The FI and feed conversion ratio were not significant among the treatment groups. The carcass, liver, intestine and heart weight and their percentage to carcass were significantly differ in treatment groups (p<0.05). The serum MDA and NO decreased in hempseed addition (p <0.001). The serum SOD, CAT and GSH-Px were increased by hempseed supplementation (p<0.001). In conclusion, hempseed supplementation to quail diets may not improve quail performance traits but increase antioxidant activity in blood.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.37-46
• /
• 1991

A method is developed for solving the natural frequencies and mode shapes of linearly variable tapered beams. The governing differential equation for the tapered beam is derived. Three kinds of cross sectional shape are considered in differential equation. The Runge-Kutta method and the determinant search method are used to perform the integration of the differential equation and to determine the natural frequencies, respectively. The hinged-hinged, hinged-clamped, damped-clamped and free-damped end constraints are investigated in numerical examples. The lowest four nondimensional natural frequencies are obtained as functions of $d_b/d_a$. ratio. The effects of end constraints and cross sectional shapes on frequencies are analyzed and typical mode shapes are also presented.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.3
• /
• pp.127-132
• /
• 2011

The silicon-containing Diamond-like Carbon (Si-DLC) film as an low friction coefficient coating has especially treated a different silicon content by plasma-enhanced chemical vapor deposition (PECVD) process at $500^{\circ}C$ on nitrided-STD 11 mold steel with (TMS) gas flow rate. The effects of variable silicon content on the Si-DLC films were tested with relative humidity of 5, 30 and 85% using a ball-on-disk tribometer. The wear-tested and original surface of Si-DLC films were analysed for an understanding of physical and chemical characterization, including a changing structure, via Raman spectra and nano hardness test. The results of Raman spectra have inferred a changing intra-structure from dangling bonds. And high silicon containing DLC films have shown increasing carbon peak ratio ($I_D/I_G$) values and G-peak values. In particular, the tribological tested surface of Si-DLC was shown the increasing hardness value in proportional to TMS gas flow rate. Therefore, at same time, the structure of the Si-DLC film was changed to a different intra-structure and increased hardness film with mechanical shear force and chemical reaction.

• Journal of Hydrogen and New Energy
• /
• v.13 no.3
• /
• pp.224-232
• /
• 2002

CdS-$TiO_2$ nano-composite sol was prepared by the sol-gel method in organic solvents at room temperature and further hydrothermal treatment at various temperatures to control the physical properties of the primary particles. Again, CdS-$TiO_2$ composite particulate films were made by casting CdS-$TiO_2$ sols onto $F:SnO_2$ conducting glass and then heat-treatment at $400^{\circ}C$. Physical properties of these 61ms were further controlled by the surface treatment with $TiCl_4$, aqueous solution. The photo currents and hydrogen production rates measured under the experimental conditions varied according to the $CdS/[CdS+TiO_2]$ mole ratio and the mixed-sol preparation method. For $CdS-TiO_2$ composite sols prepared in IPA, CdS particles were homogeneously surrounded by $TiO_2$ particles. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$. It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.