• Biomedical Science Letters
• /
• v.12 no.4
• /
• pp.439-442
• /
• 2006

To evaluate the postmortem changes in activities of oxygen free radical metabolizing enzymes, the rats were sacrificed with cervical dislocation and were kept in an incubator at $25^{\circ}C$, 70% of humidity for 12 hours. The activities of aniline hydroxylase, catalase, glutathione-S-transferase and superoxlde dismutase were decreased with the time. On the other hand, the activity and type conversion ratio (type D ${\to}$type O) of hepatic xanthine oxidase (XO) were gradually increased. From these changes of XO, the estimation of death time (mathematical equation) could be determined with the least square method. To clarify the cause of increasing XO activity, enzyme kinetics were examined. The Km values of XO were decreased with the time. In conclusion, the determination of liver XO activity might be used for the estimation of death time in the early postmortem period.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.67-68
• /
• 2005

This thesis is concerned with basic research for development of EM wave absorbers in sheet type for mobile phones. By controlling the sendust ratio, the $Al(OH)_3$ coating, the thickness, the kind of binders, EM wave absorbers were prepared and examined. Centeral frequency shifts toward lower with increasing thickness of the absorber, and absorption ability controlled to adjust Sendust amount. The absorption band of the EM wave absorber coated with $Al(OH)_3$ becomes larger than that of non-coated one. Sendust composite microwave absorbers mixed with CPE were prepared at $70^{\circ}C$ in temperature. The fabricated EM wave absorbers show a reflection coefficient 5.56 dB at 1.8 GHz in thickness of 0.85 mm.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.805-809
• /
• 2003

We developed a human-sized BWR(biped walking robot) named KUBIR1 driven by a new actuator based on the ball screw which has high strength and high gear ratio. KUBIR1 was developed to walk autonomously such that it is actuated by small torque motors and is boarded with DC battery and controllers. To utilize the information on the human walking motion and to analyze the walking mode of robot, a motion capture system was developed. The system is composed of the mechanical and electronic devices to obtain the joint angle data. By using the obtained data, a 3-D graphic interface was developed based on the OpenGL tool. Through the graphic interface, the control input of KUBIR1 is performed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.3
• /
• pp.31-39
• /
• 1996

The objective of this study is to investigate the influence of welding residual stresses on the fatigue crack growth behavior of cracks located transverse to the weld bead. For this purpose, G. T. A (Gas Tungsten Arc) welding was performed on hte Al alloy 1100-O plate and the same initial crack is made on HAZ(Heat Affected Zone), weld metal and base meta respectively. Specimens were used CT(Compact Tension) specimens. Initial welding residual stresses were measured by using strai gage sectioning method. All specimens were tested under constant amplitude load with stress ratio R=0.1, It is possible to predict fatigue crack growth behaviors and the fatigue life, using numerical analysis together with distribution of initial residual stress and the values of C and m obtained from $da/dN-{\Delta}K$

• Computers and Concrete
• /
• v.14 no.3
• /
• pp.263-277
• /
• 2014

This study investigated four electric field configurations of two-dimensional accelerate lithium migration technique (ALMT), including line-to-line, plane-to-line, contour-to-line and plane-to-plane, and analyzed the ion migration behavior and efficiency. It was found that the free ion distribution diagram and voltage distribution diagram were similar, and ions migrated in the power line direction. The electrode modules were used for the mortar specimen with w/c ratio of 0.5. The effectively processed areas accounted for 14.1%, 39.0%, 49.4% and 51.4% of total area respectively on Day 28. Larger electrode area was more advantageous to ion migration. In addition, it was proved that the two-dimensional electric field could be divided into different equifield line active regions, and regarded as affected by one-dimensional electric field, and the ion migration results in various equifield line active regions were predicted by using the duration analysis method based on the theoretical model of ion migration obtained from one-dimensional test.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2089-2094
• /
• 2010

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. In this paper, Suitable to a subway wireless video transmission OFDM receiver is designed. OFDM receiver system has 6dB gaion because uses diversity of space diversity and MRC(Maximum Ratio Combining) diversity. The transmitter system use C&ITechnologies's transmitter board. IF frequency of receiver is 480MHz. OFDM modulation parameter is as follow, The bandwidth is 8MHz, The numuber of carrier if 2,000, The modulation methode is QAM16, The guard interval is 1/32.

• Journal of Photoscience
• /
• v.9 no.1
• /
• pp.23-28
• /
• 2002

In order to obtain thermal-stable, low birefringent, and low optical loss waveguiding materials, we synthesized several fluorinated poly (maleimide-co-glycidylmethacrylate)s using a pentafluorophenylmaleimide (PEM) and two kinds of methacrylate derivatives as comonomers and glycidylmethacrylate as a crosslinker. One comonomer is a linear fluorinated methacrylate (HFBM) and another is a bulky norbornane-derived methacrylate (NMMA). These copolymers could be self-crosslinked by heating due to epoxy groups of glycidylmethacrylates. As a maleimide contents increased to 50 mol%, these copolymers showed high decomposition temperatures of above 300$^{\circ}C$. The refractive index could be precisely controlled by the variation of PFM/HFBA or PFM/NMMA feed ratio in the range of 1.410∼1.508 at 643 nm. The copolymers had very low birefringence in the range of 1∼5${\times}$10$\^$-4/.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.94-101
• /
• 1999

Twelve pure silkworm lines identified based in higher G.C.A values from a line${\times}$Tecter crossing programme, were crossed with twelve breeds showing cocoon shell ratio>22% and hybrids prepared, evaluated in a Multiple index method. Seven hydrids showing average index value>50 in all the 10 economic characters were seclcted and evaluated in the laboratory. However, two hybrids viz., A3${\times}$935E and A3${\times}$916B were finally selected based on the superiority of the breeds in one day shorter larval duration and with and with higher reeling characters compared to control KA${\times}$NB4D2. The breeding procedure involed in evolution hybrids are discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.878-883
• /
• 2003

To modify some problems of ACI shear provisions, ultimate shear strength equation considering size effect and arch action to compute shear strength in high-strength concrete beams without stirrups is presented in this research. Three basic equations, namely size reduction factor, rho factor, and arch action factor, are derived from crack band model of fracture mechanics, analysis of previous some shear equations for longitudinal reinforcement ratio, and concrete strut described as linear function in deep beams. Constants of basic equations are determined using statistical analysis of previous shear testing data. To verify proposed shear equation for each variable, namely d, , ρ, f/sub c/' and aid, about 250 experimental data are used and proposed shear equation is compared with ACI 318-99 code, CEB-FIP Model code, Kim & Park's equation and Zsutty's equation. While proposed shear equation is simpler than other shear equations, it is shown to be economical predictions and reasonable safety margin. Hence proposed shear strength equation is expected to be applied to practice shear design.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1428-1430
• /
• 1996

Thin Silicon oxynitride(SiON) films have been chemically deposited using 193nm ArF Excimer Laser CVD, with $Si_{2}H_{8}$, $N_{2}O$, and $NH_3$ as the reactive gases and $N_2$ as the carrier gas. Experimental results show that deposition rate and refractive index have a strong dependence on substrate temperature, chamber pressure, gas ratio, laser power and laser beam height. Electrical characterization of oxynitride films demonstrates that for $NH_{3}/N_{2}O$ flow ratios ranging from 0.25 to 1, the leakage currents, the interface trap density and the capacitances (dielect ric constant) increase and the dielectric breakdown fields decrease