• Analytical Science and Technology
• /
• v.36 no.5
• /
• pp.205-215
• /
• 2023

In the present study, an analytical method was proposed for detecting trifluralin in aquatic products at trace concentrations. The method employed QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) and gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) as the sample preparation and measurement, respectively. The effect of the aqueous phase volume used in the QuEChERS was demonstrated, and the ratio of 10:10 (mL) between water and acetonitrile phase was used for 5 g of sample. Besides, dSPE using C18 and primary-secondary amine (PSA) was applied to remove the potential interferences from the food matrices, indicating no remarkable analyte loss. The linear range was built up from 0.50 ㎍ L^-1 to 3.0 ㎍ L^-1 (R² = 0.9993). Other criteria, i.e., repeatability (RSD_r = 0.86-1.96 %), reproducibility (RSD_R = 1.09-2.01 %), and recovery (over 90 %), were in accordance with Appendix F of AOAC (2016) for method performance. Although no trifluralin was detected for the commercial samples (fish, shrimp, and breaded shrimp), the spiked samples performed favorable recoveries and precision.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.219-226
• /
• 2014

Evaluation of tree responses to temperature elevation is critical for a development of forest management techniques coping with climate change. We conducted a study on the growth responses of Betula costata, Fraxinus rhynchophylla, and Quercus variabilis seedlings to open-field artificial warming. Artificial warming set-up using infra-red heater was built in 2012 and the temperature in warmed plots was regulated to be consistently $3^{\circ}C$ higher than that of control plots. The seeds of three species were sown, and the responses of growth, biomass allocation, and net photosynthetic rate of newly-germinated seedlings on the open-field artificial warming were determined. As a result, the growth responses of the seedlings differed with the species. B. costata showed decreases in the height to diameter ratio (H/D ratio), biomass, root weight to shoot weight ratio, and net photosynthetic rate. However, root collar diameter (RCD), height, biomass, and net photosynthetic rate of Q. variabilis were increased, while the response of F. rhynchophylla was rather obscure. There was no significant difference between warmed and control plots in seedling growth for 3 species in July, whereas, RCD, height, and H/D ratio of Q. variabilis were increased and H/D ratio of B. costata was decreased in November under warming. Species-specific growth responses to warming were similar to the species-specific responses of net photosynthetic rate and biomass allocation; therefore, net photosynthetic rate and biomass allocation might attribute to growth responses to warming. Besides, a relatively obvious response in autumn compared to summer might be affected by the phenological change following artificial warming. Species-specific responses of three deciduous species to warming in this study could be applied to the development of adaptive forest management policies to climate change.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1166-1173
• /
• 2010

Sixteen Mediterranean pluriparous buffaloes were subdivided into two uniform groups of eight animals. The average weight of the two groups at the start of the trial was 671.2 and 656.7 kg. The number of days from calving were 33.4 and 33.3, and the average milk production was 12.73 and 12.33 kg/d. The trial lasted for 114 days, and was divided into two sub-periods of 58 and 56 days. The two diets, administered ad libitum, had the same forage/concentrate ratio (53/47) but in their formulation the percentage of the two forages varied. Diet 1: alfalfa hay = 10%, maize silage = 43%, concentrate 1 = 47% (6.63 MJ/kg DM of net energy; 179.5 g/kg DM of crude protein). Diet 2: alfalfa hay = 20%, maize silage = 33%, concentrate 2 = 47%, (5.99 MJ/kg DM of net energy; 155.4 g/kg DM of crude protein). For the overall trial period (33-146 days in milk), the intake of dry matter was 17.23 kg/d for Group 1 and 17.29 kg/d for Group 2 and corresponded to 2.50 and 2.58% (p<0.01) of live weight. There was no significant difference between the average weight (689.7 and 669.4 kg) and the body condition score (6.49 and 6.42) of the two groups of buffaloes. Group 1 produced a greater quantity of milk (11.89 vs. 10.90 kg/d, p<0.10) of better quality both for its higher fat content (82.32 vs. 77.29 g/kg, p<0.10) and its protein content (47.36 and 46.38 g/kg). The milk produced by the buffaloes receiving Diet 1 had a better clotting ability, lower values of r (15.98 and 16.42 min) and K20 (1.66 and 1.75 min) and a higher value of A30 (54.45 and 52.73 mm). Taking into consideration the two sub-periods, milk production was significantly different only in the first sub-period (33-90 DIM), in favour of Group 1 (13.08 vs. 11.56 kg/d, p<0.05), while the positive effect of Diet 1 was cancelled out (10.71 and 10.24 kg/d) in the second part of the trial (91-146 DIM).

• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.221-232
• /
• 2008

This paper represents the final results of a research program sponsored by the European Commission through project WIND-CHIME ($\underline{W}$ide Range Non-$\underline{IN}$trusive $\underline{D}$evices toward $\underline{C}$onservation of $\underline{HI}$storical Monuments in the $\underline{ME}$diterranean Area), in which the possibility of using advanced seismic protection technologies to preserve historical monuments in the Mediterranean area is investigated. In the current research, the dynamic characteristics of two outstanding Mamluk-Style minarets, which similar minarets were reported to experience extensive damage during Dahshur 1992 earthquake, are investigated. The first minaret is the Qusun minaret (1337 A.D, 736 Hijri Date (H.D)) located in El-Suyuti cemetery on the southern side of the Salah El-Din citadel. The minaret is currently separated from the surrounding building and is directly resting on the ground (no vaults underneath). The total height of the minaret is 40.28 meters with a base rectangular shaft of about 5.42 ${\times}$ 5.20 m. The second minaret is the southern minaret of Al-Sultaniya (1340 A.D, 739 H.D). It is located about 30.0 meters from Qusun minaret, and it is now standing alone but it seems that it used to be attached to a huge unidentified structure. The style of the minaret and its size attribute it to the first half of the fourteenth century. The minaret total height is 36.69 meters and has a 4.48 ${\times}$ 4.48 m rectangular base. Field investigations were conducted to obtain: (a) geometrical description of the minarets, (b) material properties of the minarets' stones, and (c) soil conditions at the minarets' location. Ambient vibration tests were performed to determine the modal parameters of the minarets such as natural frequencies and mode shapes. A $1/16^{th}$ scale model of Qusun minaret was constructed at Cairo University Concrete Research Laboratory and tested under free vibration with and without SMA wire dampers. The contribution of SMA wire dampers to the structural damping coefficient was evaluated under different vertical loads and vibration amplitudes. Experimental results were used along with the field investigation data to develop a realistic 3-D finite element model that can be used for seismic risk evaluation of the minarets. Examining the updated finite element models under different seismic excitations indicated the vulnerability of such structures to earthquakes with medium to high a/v ratio. The use of SMA wire dampers was found feasible for reducing the seismic risk for this type of structures.

• BMB Reports
• /
• v.35 no.3
• /
• pp.313-319
• /
• 2002

N-Acetyl-$\beta$-D-hexosaminidase ($\beta$-HexNAc'ase) (EC 3.2.1.52) was purified from rice seeds (Oryza sative L. var. Dongjin) using ammonium sulfate (80%) precipitation, Sephadex G-150, CM-Sephadex, and DEAE-Sephadex chromatography, sequentially. The activities were separated into 7 fractions($F_1-F_7$) by CM-Sephadex chromatography. Among them, F6 was further purified to homogeneity with a 13.0% yield and 123.3 purification-fold. The molecular mass was estimated to be about 52 kDa on SDS-PAGE and 37.4 kDa on Sephacryl S-300 gel filtration. The enzyme catalyzed the hydrolysis of both p-nitrophenyl-N-acetyl-$\beta$-D-hexosaminide (pNP-GlcNAc) and p-nitrophenyl-N-acetyl-$\beta$-D-hexosaminide (pNP-GalNAc) as substrates, which are typical properties of $\beta$-HexNAc'ase. The ratio of the pNP-GlcNAc'ase activity to the pNP-GalNAc'ase activity was 4.0. However, it could not hydrolyze chitin, chitosan, pNP-$\beta$-glucopyranoside, or pNP-$\beta$-glucopyranoside. The enzyme showed $K_m$, $V_{max}$ and $K_{cat}$ for pNP-GlcNAc of 1.65 mM, $79.49\;mM\;min^{-1}$, and $4.79{\times}10^6\;min^{-1}$, respectively. The comparison of kinetic values for pNP-GlcNAc and pNP-GalNAc revealed that the two enzyme activities are associated with a single binding site. The purified enzyme exhibited optimum pH and temperature for pNP-GlcNAc of 5.0 and $50^{\circ}C$, respectively. The enzyme activity for pNP-GlcNAc was stable at pH 5.0-5.5 and $20-40^{\circ}C$. The enzyme activity was completely inhibited at a concentration of 0.1 mM $HgCl_$ and $AgNO_3$, suggesting that the intact thiol group is essential for activity. Chloramine T completely inhibited the activity, indicating the possible involvement of methionines in the mechanism of the enzyme.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.78-84
• /
• 2016

In this work, finite element investigations were carried out to optimize reverse drawing process design for manufacture of high-capacity aluminum liner used in fuel cell vehicle. The tensile tests with aluminum alloy Al6061 annealed at $350^{\circ}C$ were carried out to obtain the flow stresses. In order to estimate more accurate flow stresses after necking, the flow stresses were estimated from the comparison of load vs. displacement curves which were obtained from experimental and simulation results of tensile tests. In case of finite element analyses of reverse drawing processes, it was focused on the effects of process designs such as punch and die designs, blank holding force, drawing ratio and the clearance between the punch and blank holder on the generation of wrinkle and fracture of the blank and partially heated punch. However, it was revealed that experimental results still show the fracture at the end of 2nd drawn cup, although partially heated punch is used. Nevertheless, the drawn cup can be used because the sufficient length of the drawn cup for the next flow forming process and spinning process was obtained.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.975-980
• /
• 2020

Cervical neural foraminal stenosis is a very common spinal disease that affects a relatively large number of people of all ages. However, since imaging methods that quantitatively provide neural foraminal stenosis are lacking, this study attempts to present quantitative measurement results by reconstructing 3D computed tomography images. Using a 3D reconstruction software, the surrounding bones were removed, including the spinous process, transverse process, and lamina of the cervical spine so that the neural foramen were well observed. Using Image J, a region of interest including the neural foramen area of the 3D image was set, and the number of pixels of the neural foramen area was measured. The neural foramen area was calculated by multiplying the number of measured pixels by the pixel size. In order to measure the widest area of the neural foramen, it was measured between 40-50 degrees in the opposite direction and 15-20 degrees toward the head. The measured cervical neural foramen area showed consistent measurement values. The largest measured area of the right neural foramen C5-6 was 12.21 ㎟, and after 2 years, the area was measured to be 9.95 ㎟, indicating that 18% stenosis had progressed. Since 3D reconstruction using axial CT scan images, no additional radiation exposure is required, and the area of stenosis can be objectively presented. In addition, it is good to explain to patients with neural stenosis while viewing 3D images, and it is considered a good method to be used in the evaluation of the progression of stenosis and post-operative evaluation.

• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.1-26
• /
• 1967

In order to develop the standards for the measurement of drought resistance in mulberry trees (Morus genus) the varietal differences of drought resistance were measured for 30 mulberry varieties, and the relationships between the drought resistance and the histological and physiological characteristics of mulberry leaves were investigated. The results were summarized as follows; 1. It is reasonable to use the drought resistance ratio, expressed by D/D'＊100, for the standard of drought resistance measurement for mulberry tree as a perennial tree crop. Where: D stands for growth amount(shoot length) in the plot of dry treatment, at the end of treatment. D' stands for an expected value of D which is expressed by B＊C/A. Here, A is the growth amount of wet treatment plot at the beginning of treatment, B is the growth amount of dry treatment plot at the beginning of treatment, and C is the growth amount of wet treatment plot at the end of treatment. 2. The results obtained from the application of above formula showed that the varieties Cadaneo, Tahozosaeng, Yongchunchuwu, Kaeryang suban. and Kabsun were highly resistant to drought and the varieties Jukmok, Shipyung, Sobun, Kaeryangzosaeng shipmoonza and Chungagokyo were highly susceptible. 3. Among leaf tissues. the rate of inter-cellular space showed the highest relationship with drought resistance. The correlation coefficient calculated (r=0.4153) was highly significant. Other leaf tissues such as epidermis and palisade showed no significant correlations with drought resistance. 4. The size and density of stomata were correlated to drought resistance. That is: Correlation between drought resistance and size of stomata(length ${\times}$ width)......r= -0. 3253(signif. at 5%) density(No. of stomata/l$\textrm{mm}^2$......r= +0.5047(signif. at 1%)

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.283-290
• /
• 2012

The objective of this study was to compare the growth performance between Korean native layer chickens and imported layer chickens at early rearing stage. Total number of chicks analyzed in this study was 276 and feeding period was conducted from July 24, 2012 for 10 weeks. Five strains including 2 Korean native strains: A=Korean Native Black (Chungcheongbuk-do) and B=Korean Native Yellowish Brown (Gyeongsangbuk-do) and 3 imported layer strains: C=White Leghorn (Gyeongsangnam-do), D=White Leghorn (Seoul), and E=Ameraucanas (Gyeongsangbuk-do) were used to analyze the following traits such as fertility, hatchability, body weight at a different growing stage, average body weight gain, and feed conversion ratio. The fertilities and hatchabilities of strains were 93.88% and 95.65% in strain A, 81.75% and 86.24% in strain B, 82.25% and 88.15% in strain C, 79.25% and 90.85% in strain D, and 71.50% and 88.11% in strain E, respectively. A viability was excellent in strains A and E to be more than 98% and was low in strain D to be 86.67% at a whole week. The strain A had greater body weight during growing stages (p<0.05) than the other strains. The shank length of strain D of $56.69{\pm}3.27mm$ was the highest value at 10 weeks of age among strains (p<0.05). The phenotypic correlation coefficients of strains A and D between an average body weight gain and a shank length were 0.63 and 0.73 during 0~2 wk, 0.70 and 0.55 during 2~4 wk, 0.55 and 0.54 during 4~6 wk, 0.50 and 0.24 during 6~8 wk, and 0.46 and 0.29 during 8~10 wk, respectively. The Korean native hens may have potential abilities to be used as an excellent seed stock for poultry industry.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.660-666
• /
• 2008

This study was designed to compare the thermal oxidative stability of lard, soy bean oil, and hot pepper seed oil for 0-3 d at $100^{\circ}C$, and to evaluate the effect of capsaicin on thermal oxidative stability in lard and soy bean oil. As result, thermal oxidation stability was shown in the order hot pepper seed oil>soy bean oil>lard for 0-3 d at $100^{\circ}C$. In blended oils, hot pepper seed oil effectively inhibited lipid oxidation when mixed with lard than soy bean oil by showing the ratio of 30% pepper seed oil plus 70% lard and 60% pepper seed oil plus 40% soy bean oil inhibited lipid oxidation during storage periods. And to investigate the antioxidative effect of antioxidants such as capsaicin and alpha-tocopherol in hot pepper seed oil, 1,200 and 2,400 ppm capsaicin, or 0.3% alpha-tocopherol were added in soy bean oil and lard and stroed for 0-3 d at $100^{\circ}C$. Capsaicin inhibited lipid oxidation in lard but not in soy bean oil, however alpha-tocopherol exhibited a prooxidaton effect in soybean oil. Therefore, it suggests that the application of hot pepper seed oil or capsaicin in lard may be better for thermal oxidative stability.