• Title/Summary/Keyword: (5/3) 변환

Search Result 1,738, Processing Time 0.029 seconds

A Wideband Down-Converter for the Ultra-Wideband System (초광대역 무선통신시스템을 위한 광대역 하향 주파수 변환기 개발에 관한 연구)

  • Kim Chang-Wan;Lee Seung-Sik;Park Bong-Hyuk;Kim Jae-Young;Choi Sang-Sung;Lee Sang-Gug
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.2 s.93
    • /
    • pp.189-193
    • /
    • 2005
  • In this paper, we propose a direct conversion double-balanced down-converter fer MB-OFDM W system, which is implemented using $0.18\;{\mu}m$ CMOS technology and its measurement results are shown. The proposed down-converter adopts a resistive current-source instead of general transconductance stage using MOS transistor to achieve wideband characteristics over RF input frequency band $3\~5\;GHz$ with good gain flatness. The measured conversion gain is more than +3 dB, and gain flatness is less than 3 dB for three UWB channels. The dc consumption of this work is only 0.89 mA from 1.8 V power supply, leading to the low-power W application.

The Efficient Coding Tools based 3-Dimensional Transform in H.264/AVC (H.264/AVC에서 3차원 변환에 기반을 둔 효율적인 동영상 압축 방법)

  • Jo, Jae-Kyu;Cho, Hye-Jeong;Lee, Jin-Ho;Jeong, Se-Yoon;Ahn, Chang-Beom;Oh, Seoung-Jun
    • Journal of Broadcast Engineering
    • /
    • v.15 no.3
    • /
    • pp.434-453
    • /
    • 2010
  • In this paper, we propose 3DTE(3-Dimensional Transform Environment) that is based on 3DT(Dimensional Transform) that performs 2-dimensional integer DCT(Discrete Cosine Transform) based on $4{\times}4$ block and 1-dimensional integer DCT based on $4{\times}1$ block after collecting same frequency coefficients in neighboring $4{\times}4$ block and supports it's additional coding tools for high performance. The transform of 3DT can keep prediction error by using $4{\times}4$ block and reduce spatial redundancy additionally. The proposed 3DTE can provide coding tools to improve the coding efficiency with using 3DT. The performance of 3DTE compared to JM11.0 is average 3.58% and 5.40% bit savings for all test sequences and HD sequences, respectively, with keeping subjective video quality in High profile.

Single-Inductor Multiple-Output DC-DC Converter with Negative Feedback Selection Circuit (부궤환 선택회로를 갖는 단일 인덕터 다중 출력 직류-직류 변환기)

  • Gong, Jung-Chul;Roh, Yong-Seong;Moon, Young-Jin;Choi, Woo-Seok;Yoo, Chang-Sik
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.12
    • /
    • pp.23-30
    • /
    • 2011
  • This paper presents a Single-Inductor Multiple-Output (SIMO) DC-DC Converter with a negative feedback selection circuit to improve a regulation property at light load and to generate independent multiple outputs. The conventional SIMO DC-DC converter with a fixed negative feedback circuit cannot regulate correctly at light load. The SIMO DC-DC converter with the proposed negative feedback selection circuit has been designed in 0.35um 2-poly 3-metal BCDMOS. This converter is dual output boost converter with the 1.5V input and 2.5V, 3.0V output. The power conversion efficiency varies from 59% at 10mA loads to 85% at 50mA loads.

비선형회귀분석에서 편잔차그림에 대한 연구

  • 강명욱;김정혜
    • Communications for Statistical Applications and Methods
    • /
    • v.5 no.3
    • /
    • pp.571-580
    • /
    • 1998
  • 선형회귀분석에서 새로운 변수가 모형에 추가될 때 변수변환의 필요성과 적절한 변환의 형태를 진단하는 기능이 있다고 알려져 있는 편잔차그림과 덧편잔차그림을 비선형회귀모형에 적용하고 이 그림들이 기능을 제대로 수행할 수 있는 조건을 알아보았다.

  • PDF

Comparison of SPOT-5 DEM Control with SRTM DEM (SRTM DEM을 이용한 SPOT-5 DEM의 조정 비교)

  • Lee, Hyo-Seong;Han, Dong-Yeob
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.29 no.2
    • /
    • pp.193-199
    • /
    • 2011
  • It is necessary to register precisely Digital Elevation Model (DEM) generated from SPOT -5 stereo images in order to monitor the topographic and environmental changes of important topographic features such as Mt. Baekdu. The SPOT-5 DEM is registered taking SRTM DEM as a reference DEM. If SPOT-5 DEM is transformed with single 3D rigid equation, it has many errors. Therefore, this study extracted uniformly ground control points over study area and estimated locally adapted transformation equation. The accuracy of proposed method was evaluated with comparison to scale-based and GCP-based transformation method.

PFM-Mode Boost DC-DC Convertor for Mobile Multimedia Application (휴대용 멀티기기를 위한 PFM방식의 승압형 DC-DC 변환기)

  • Kim, Ji-Man;Park, Yong-Su;Song, Han-Jung
    • 전자공학회논문지 IE
    • /
    • v.47 no.3
    • /
    • pp.14-18
    • /
    • 2010
  • In this paper, we describe a CMOS DC-DC converter with a variable output voltage(5-7V @100mA) for a portable battery-operated system applications. The proposed DC-DC converter is used along with a Pulse-Frequency Modulation (PFM) method and consists of reference circuit, a feedback resistor, a controller, and an internal oscillator. The integrated DC-DC converter with two external passive components(L,C) has been designed and fabricated on a 0.5um 2-poly 3-metal CMOS process and could be applied to the Personal Digital Assistants(PDA), cellular Phone, Laptop Computer, etc.

A Design of Converter Module between UTOPIA-L3 and CSIX-L1 (UTOPIA-L3/CSIX-L1 변환모듈 설계)

  • 김광옥;최창식;박완기;곽동용
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2002.10e
    • /
    • pp.127-129
    • /
    • 2002
  • NP Forum에서는 다양한 밴더의 네트워크 프로세서와 스위치 패브릭간에 물리적 인터페이스를 제공하기 위해 CSIX-L1(Common Switch Interface-Level 1 )인터페이스를 표준화하였다. IBM 네트워크 프로세서는 MPLS 및 VPN, VLAN, Security, Ipv6와 같은 다양한 어플리케이션과 TBI. SMII CMII. POS bus등 다양한 가입자 인터페이스를 지원하며, L2 기 반에서 2.5Gbps 이상의 패킷 처리를 수행하기 때문에 많은 시스템에 사용된다. 그러나 IBM네트워크 프로세서는 스위치 인터페이스로 DASL인터페이스를 사용한다. 따라서 DASL인 터페이스와 CSIX-L1 인터페이스를 정합하기 위해서는 IBM UDASL칩을 이용해 DASL인 터페이스를 UTOPIA-L3인터페이스로 변환해야 하며, 이것을 다시 CSIX-L1인터페이스로 변환해야 한다. 따라서 본 논문에서는 UTOPIA-L3인터페이스 패킷과 CSIX-L1인터페이스 프레임을 상호 변환하는 모듈을 설계하였으며, 32비트 데이터 버스와 최대 125MHz로클록을 사용해 최대 4Gbps의 패킷처리를 제공하도록 구현하였다. 또한 스위치 패브릭의 특정 포트에서 과잉 트래픽 전달로 인해 발생할 수 있는 블로킹을 방지하기 위해 네트워크 프로세서에게 3개의 Priority/최대 64개 포트수의 VOQ(Virtual Output Queue)를 제공하는 기법에 대해서 기술한다.

  • PDF

The Study on Multi-band Mixer for Adaptive Radar (적응형 레이다를 위한 다중대역 혼합기에 관한 연구)

  • Go, Min-Ho;Kang, Se-Byeok
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.16 no.6
    • /
    • pp.1053-1058
    • /
    • 2021
  • This paper presents the multi-band mixer which converts a X-, K- and Ka-band adaptively by adjusting the gate-bias voltage of an active device. The proposed mixer presented a conversion loss of -10 dB at -0.8 V gate-bias voltage for X-band, a conversion loss of -9 dB at -0.3 V gate-bias voltage for K-band and for Ka-band, a conversion loss of -7 dB at -0.2 V gate-bias voltage under the LO power of +6.0 dBm. The 1dB compression point (P1dB) is +0.5 dBm for all band.

Analysis and Prediction for TOC Data in the Juam-lake Using Wavelet Theory (웨이블렛 이론을 이용한 주암호 자료의 분석 TOC 및 예측)

  • Oh, Chang-Ryol;Jin, Young-Hoon;Gwak, Pil-Jeong;Park, Sung-Chun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1037-1041
    • /
    • 2006
  • 본 연구에서는 수질자료에 내재되어 있는 주기성 및 경향성 등을 파악하기 위해 웨이블렛 변환을 적용하였으며 비선형 시계열자료에 대한 예측력이 우수한 인공신경망을 적용하여 예측모형을 개발하였다. 대상자료는 섬진강 유역의 주암호 수질자동측정망 지점에서 측정되고 있는 수질자료 중 2002년 1월 1일 ${\sim}$ 2004년 12월 31일까지의 일 TOC 수질자료를 이용하였다. 웨이블렛 변환을 위해 사용한 기저함수로는 Daubechies의 10번 웨이블렛 함수('db10')를 사용하였으며, 각 스케일링 및 웨이블렛 함수를 이용하여 5단계까지 변환하였다. 최종 변환된 근사성분과 D5, D4, D3, D2의 상세성분 자료를 이용하여 1시간후 TOC 예측 모형을 구성하였으며 그 결과 은닉층의 노드의 수가 17개인 모형인 Model_5_17 모형이 가장 우수한 예측력을 보였다.

  • PDF

Degradation and Conversion of Blood Group Antigens in Saliva (혈액형 항원의 분해와 변환에 관한 연구)

  • Lim, Sang-Wook;Park, Hee-Kyung;Jung, Seung-Eun;Kho, Hong-Seop;Kim, Young-Ku
    • Journal of Oral Medicine and Pain
    • /
    • v.30 no.1
    • /
    • pp.15-23
    • /
    • 2005
  • Mucin glycoproteins are the primary carriers of the oligosaccharide moieties that constitute the blood group substances in human saliva. The aim of this study was to determine whether or not the conversion of either the A or B blood group antigens to the H antigen can occur during the degradation process of stored saliva samples. Forty subjects (20 subjects in each A and B blood group) identified as secretors were enrolled in this study. Fresh whole saliva samples and their clarified supernatants were stored at room temperature for 1 week. The conversion of the blood group antigens was detected by SDS-PAGE and immunoblotting. Among the subjects showing the conversion in whole saliva, glandular saliva samples were obtained from 8 subjects (4 subjects in each A and B blood group). Submandibular-sublingual saliva (SMSL) and a mixture of SMSL and parotid saliva (PS) were stored at room temperature for 1 week. The conversion of the blood group antigens was detected by the same method. The obtained results were as follows: 1. In the clarified samples of whole saliva, the A antigen was detected as being either intact (5%) or degraded molecules (95%) after the 1 week period. Conversion of the A antigen to the H antigen was detected in 5 subjects (25%). In the unclarified samples, the A antigen was either detected as degraded molecules (90%) or was not detected (10%). Conversion of the antigen had occurred in 4 subjects (20%). 2. In the clarified samples of whole saliva, the B antigen was detected as intact (20%) or as degraded molecules (65%) or was not detected (15%) after the 1 week period. Conversion of the B antigen to the H antigen was detected in 7 subjects (35%). In the unclarified samples, the B antigen was detected as intact (5%) or as degraded molecules (65%), or was not detected (30%). Conversion of the antigen was observed in 2 subjects (10%). 3. In the glandular saliva samples, only one of the four subjects displayed an antigenic conversion from the A to H antigen or from the B to H antigen. The conversion had occurred in both the SMSL samples and the SMSL and PS mixture. No degradation of the antigens was detected in the other three samples of the A or B blood groups, nor was there any conversion. The results demonstrated that conversion of the blood group antigens could occur in saliva, and suggested that the enzymes responsible for the conversion are present in saliva. Further studies on the origin and activity of the specific glycosidases in saliva as well as quantitative measurements of the antigenic conversion will be needed.