• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1090-1094
• /
• 2008

Treatment effects of grape fruit stem extracts (GFSE) containing trans-resveratrol or fermented pollen (FP), and ethylene gas scavenging material (EGS) on the storage property of fresh jujube (Z izyphus jujuba forma hoonensis C.S. Yook) were investigated. Fresh jujubes were packed in different storage containers (PE film and Lock & Lock vessel), and treated with GFSE containing trans-resveratrol of 30 ppm or 1% FP, and EGS. The storage vessels were stored in refrigerator ($0{\pm}1^{\circ}C$) during 12 weeks, and then quality characteristics during storage period were analysed. Hardness slightly increased until 4 weeks and decreased afterward. Soluble solid ($^{\circ}Bx$) and total titratable acidity of fresh jujube slightly increased in all treatments during storage period. Vitamin C content of fresh jujube slightly decreased in all treatments during storage period. Number of microorganisms decreased until 4 weeks and increased afterward. The decay enzyme activity increased in all treatments during storage period. Storage stability was higher for PE film than Lock & Lock containers. Storage period of fresh jujube in this experiment ranges in $8{\sim}9$ weeks for maturity fruits treated with 30 ppm of GFSE and ethylene gas scavenging material.

• Natural Product Sciences
• /
• v.8 no.1
• /
• pp.1-15
• /
• 2002

An International Cooperative Biodiversity Group (ICBG) program based at the University of Illinois at Chicago initiated its activities in 1998, with the following specific objectives: (a) inventory and conservation of of plants of Cuc Phuong National Park in Vietnam and of medicinal plants of Laos; (b) drug discovery (and development) based on plants of Vietnam and Laos; and (c) economic development of communities participating in the ICBG project both in Vietnam and Laos. Member-institutions and an industrial partner of this ICBG are bound by a Memorandum of Agreement that recognizes property and intellectual property rights, prior informed consent for access to genetic resources and to indigenous knowledge, the sharing of benefits that may arise from the drug discovery effort, and the provision of short-term and long-term benefits to host country institutions and communities. The drug discovery effort is targeted to the search for agents for therapies against malaria (antimalarial assay of plant extracts, using Plasmodium falciparum clones), AIDS (anti-HIV-l activity using HOG.R5 reporter cell line (through transactivation of the green fluorescent protein/GFP gene), cancer (screening of plant extracts in 6 human tumor cell lines - KB, Col-2, LU-l, LNCaP, HUVEC, hTert-RPEl), tuberculosis (screening of extracts in the microplate Alamar Blue assay against Mycobacterium tuberculosis $H_{37}Ra\;and\;H_{37}Rv),$ all performed at UIC, and CNS-related diseases (with special focus on Alzheimer's disease, pain and rheumatoid arthritis, and asthma), peformed at Glaxo Smith Kline (UK). Source plants were selected based on two approaches: biodiversity-based (plants of Cuc Phuong National Park) and ethnobotany-based (medicinal plants of Cuc Phuong National Park in Vietnam and medicinal plants of Laos). At mc, as of July, 2001, active leads had been identified in the anti-HIV, anticancer, antimalarial, and anti- TB assay, after the screening of more than 800 extracts. At least 25 biologically active compounds have been isolated, 13 of which are new with anti-HIV activity, and 3 also new with antimalarial activity. At GSK of 21 plant samples with a history of use to treat CNS-related diseases tested to date, a number showed activity against one or more of the CNS assay targets used, but no new compounds have been isolated. The results of the drug discovery effort to date indicate that tropical plant diversity of Vietnam and Laos unquestionably harbors biologically active chemical entities, which, through further research, may eventually yield candidates for drug development. Although the substantial monetary benefit of the drug discovery process (royalties) is a long way off, the UIC ICBG program provides direct and real-term benefits to host country institutions and communities.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.383-392
• /
• 2016

This study is to evaluate the physical and mechanical properties on the Ipseok-dae columnar joints of Mt. Mudeung National Park. For these purposes, physical and mechanical properties as well as discontinuity property on the Mudeungsan tuff, measurement of vibration and local meteorology around columnar joints, and ground deformation by self-weight of columnar joints were examined. For the physical and mechanical properties, average values were respectively 0.65% for porosity, 2.69 for specific gravity, 2.68 g/cm³ for density, and 2411 m/s for primary velocity, 323 MPa for uniaxial compressive strength, 81 GPa Young's modulus, and 0.25 for Poisson's ratio. For the joint shear test, average values were respectively 3.15 GPa/m for normal stiffness, 0.38 GPa/m for shear stiffness, 0.50 MPa for cohesion, and 35° for internal friction angle. The JRC standard and JRC chart was in the range of 4~6, and 1~1.5, respectively. The rebound value Q of silver schmidt hammer was 57 (≒ 90 MPa). It corresponds 20% of the uniaxial compressive strength of intact rock. The maximum vibration value around the Ipseok=dae columnar joints was in the range of 0.57 PPV (mm/s)~2.35 PPV (mm/s). The local meteorology of surface temperature, air temperature, humidity, and wind on and around columnar joints appeared to have been greatly influenced the weather on the day of measurement. For the numerical analysis of ground deformation due to its self-weight of the Ipseok-dae columnar joints, the maximum displacement of the right ground shows when the ground distance is approximately 2 m, while drastically decreased by 2~4 m, thereafter was insignificant. The maximum displacement of the middle ground shows when the ground distance is approximately 0~2 m, while drastically decreased by 3~10 m, thereafter was insignificant. The maximum displacement of the left ground shows when the ground distance is approximately 5~6 m, while drastically decreased by 6~10 m, thereafter was insignificant.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.935-943
• /
• 2011

This study was conducted to investigate the proximate composition, meat color, Warner-Bratzler shear force (WBS), cooking loss (CL), fatty acids composition, amino acid composition and mineral contents of Hanwoo beef (QG $1^+$, 1) and imported New Zealand black Angus beef with loin, strip loin, eye of round and chuck tender. The intramuscular fat contents were higher in the strip loin, loin and chuck tender of Hanwoo beef than New Zealand beef (p<0.05). Hanwoo QG 1 beef had higher Fe contents in the strip loin (30.52 mg/100g) and chuck tender (40.70 mg/100g) (p<0.05). Hanwoo beef had lower cooking loss and than those of New Zealand beef, whereas New Zealand beef had higher protein and amino acids contents (%) than their counterpart. There was no significant difference in the WBS between two origin samples except the chuck Hanwoo beef had significantly lower saturated fatty acids (SFA) and higher monounsaturated fatty acids contents than New Zealand beef (p<0.05). WBS values indicated that Hanwoo and New Zealand beef had similar tenderness in the loin, striploin and eye of round due to the longer aging periods of the New Zealand beef than Hanwoo beef during the distribution.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.336-344
• /
• 2015

This study was conducted to investigate changes in the physicochemical, antioxidant, and sensory properties of burdock during 9 repeated rounds of steaming ($90^{\circ}C$, 3 h) and drying ($60^{\circ}C$, 20 h) procedures. The moisture content decreased from 81.95% to 7.64% as the process was repeated. Fresh burdock showed the highest total sugar content, with 518.35 mg/g of soluble sugar, 86% being inulin. The reducing sugar content was the greatest (377.00 mg/g) in burdock that had been processed 3 times. The brown color continuously intensified, reaching its peak at 7 rounds of processing, and then weakened. Crude saponin content was the highest (6.17%) after the 5th processing. Polyphenol content and antioxidant activity (DPPH, ABTS, FRAP) were the highest at the 3rd and 5th procedures, respectively. Repeated processing weakened the grass and root odors and the bitter, astringent, and metallic tastes, whereas it strengthened the sweet and savory odors, caramel flavor, and richness.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.490-496
• /
• 2018

"Samkwang1," a japonica rice variety, was developed as a cross between "Samkwang" and F1 of Suwon152 (IT008283), which has a medium maturing and lodging resistance and Samkwang (IT284608), a high quality variety with bacterial blight resistance and mid-late maturing property by the rice breeding team at NICS in 2015. The heading date of "Samkwang1" was August 8 in the middle plain area, which was 2 days early than that of "Hwaseong." "Samkwang1" had a culm length of 77 cm, which was 7 cm shorter than that of "Hwaseong," and it had 128 spikelets per panicle. The viviparous germination rate of "Samkwang1" was 2.1%. "Samkwang1" showed resistance to blast, bacterial blight (K1, K2, and K3 race) and stripe virus, but was susceptible to the K3a race of bacterial blight, dwarf and black streak dwarf viruses, and plant hoppers. The milled rice of this variety exhibits translucent and medium short grains. The cooked rice grains of "Samkwang1" have an excellent palatability index (0.35) and lower protein content (6.2%) than that of "Hwaseong." The characteristics related to grain milling were better than those of "Hwaseong," especially the head rice milling recovery ratio and head rice ratio (94.2%). "Samkwang1" showed 5.62 MT/ha of milled rice productivity at 11 sites under ordinary cultivation conditions (Registration No. 6798).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.393-400
• /
• 2008

1,4-Dioxane($C_4H_8O_2$), which is used as a solvent stabilizer, could make harmful effects on ecosystem because of its higher solubility, toxicity and carcinogenic by US EPA. From 2011, its discharge limit to waterbody will be regulated at 5 mg/L by Ministry of Environment Republic of Korea. It was thus to investigate that the currently operating activated sludge in polyester manufacturing processes in Gumi can properly treat it to meet with the regulation standard. For that purpose, the removal rate of 1,4-dioxane and its microbial properties were assessed for a few companies(i.e. K, H and T). Its removal efficiency was the most highly recorded in H as 98% and then 77% for K, which met with the regulation standard. However, concentration of 1,4-dioxane of T was 23 mg/L in the effluent, which is more than the regulation standard. Aside from, microbial degradation test was done for 100 ppm of 1,4-dioxane in BSM (Basal salt medium) inoculated with each of activated sludge. After 7 days, 1,4-dioxane was completely removed in the test bottle inoculated with H sludge, 67% in T and 52% in K, which could confirm that the given activated sludge might have different biodegradability against the amount of 1,4-dioxane. Therefore, microbial diversity in each company was investigated by 16s rDNA cloning methods where a species, e.g. Methylibium petroleiphilum PM1, was the greatest observed from H and in lesser from K, but it was not detected from T. Methylibium petroleiphilum PM1 is known to efficiently degrade ether like methyl tertiary-butyl ether(MTBE). It is concluded that the activated sludge in H can be most effectively adopted for a biodegradation of 1,4-dioxane in the concern of industrial sector.