• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.169-177
• /
• 2012

Distribution of the local properties in GdBCO and YBCO coated conductors was investigated using Low-temperature Scanning Laser and Hall Probe Microscopy (LTSLHPM). We prepared GdBCO and YBCO coated conductors to study the spatial distribution of the current density in a single bridge. Inhomogeneity of the ${T_c}^{max}$ in the bridge was analyzed from experimental results of Scanning Laser Microscopy (SLM) near the superconducting transition. The local transport and screening current in the bridge were also investigated using Scanning Hall Probe Microscopy (SHPM). A series of line scans of SLM of the GdBCO and YBCO sample showed that lines with more inhomogeneous distributions of ${\delta}V$ had more inhomogeneous distributions of ${T_c}^{max}$. The defect of the superconducting layer of the GdBCO sample caused by damage to the substrate affected the current flow. And we could analyze the redistribution of the current density using SLM and SHPM.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.3
• /
• pp.18-22
• /
• 2017

Addition of $BaSnO_3$ (BSO) to $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) is reported to enhance the flux pinning property of GdBCO thick films. To investigate the effect of growth condition on the pinning properties, 700 nm-thick BSO-added GdBCO films deposited with varying temperatures and growth rates were prepared by using a pulsed laser deposition method. As the deposition temperature increases, the critical current density and the pinning force density show an improved field dependence up to $750^{\circ}C$ due to the increase in the formation of the a-axis growth and the BSO nanostructures. The films deposited at higher temperatures show degraded surfaces and as a result, degraded pinning behaviors. For the change in growth rate, the critical current density and the pinning force increase as the repetition rate increase at low magnetic fields, but this behavior is reversed in high magnetic fields. These results indicate that the film growth conditions significantly affect the formation of BSO nanostructures and the pinning properties of BSO-added GdBCO films.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.213-231
• /
• 1987

For callus culture of leaves and internodal tissue of Quercus acutissirna Carr. and Quercus variabitisBL, MS and GD media were supplemented with combinations of different levels of growth substances such as NAA and BAP, NAA and kinetin, 2,4-D and BAP, and 2,4-D and kinetin. The results were obtained as follows; 1. The rates of formation and growth of callus were good on the GD medium supplemented with NAA and BAP, but the values were quite variable on the MS medium. Root formation occurred at the ratio of 1 : 10-100 in the concentrations of BAP and NAA. 2. The GD medium supplemented with the combination of NAA and kinetin showed 100% callus formation. The callus grew well on the other medium except for that with low concentration of NAA and kinetin. Most of roots were developed from leaf tissue cultured on GD media. 3. The GD medium supplemented with the combination of 2,4-D and BAP also showed 100% callus formation, and growth of callus was good on both of MS and GD media. In particular, the callus derived from internodal tissue showed. the most vigorous growth and reached above 22mm diameter, when they were cultured on MS media supplemented wi th the combinations of $10{\mu}M$ 2,4-D and $1.0{\mu}M$ BAP, and $10{\mu}M$ 2,4-D and $0.1{\mu}M$ BAP. 4. The GD medium supplemented with the combination of 2,4-D and kinetin showed high rate of callus formation, as compared with MS medium Callus grew well on both of MS and GD media.

• Journal of the Korean Magnetics Society
• /
• v.26 no.2
• /
• pp.39-44
• /
• 2016

Determination of the structural, electronic, and magnetic properties of the magnetically doped bismuth-telluride alloys are drawing lots of interest in the fields of the thermoelectric application as well as the research on magnetic interaction and topological insulator. In this study, we performed the first-principles electronic structure calculations within the density functional theory for the Gd doped bismuth-tellurides in order to study its magnetic properties and magnetic phase stability. All-electron FLAPW (full-potential linearized augmented plane-wave) method is employed and the exchange correlation potentials of electrons are treated within the generalized gradient approximation. In order to describe the localized f-electrons of Gd properly, the Hubbard +U term and the spin-orbit coupling of the valence electrons are included in the second variational way. The results show that while the Gd bulk prefers a ferromagnetic phase, the total energy differences between the ferromagnetic and the antiferromagnetic phases of the Gd doped bismuth-telluride alloys are about ~1meV/Gd, indicating that the stable magnetic phase may be changed sensitively depending on the structural change such as defects or strains.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.20 no.1
• /
• pp.1-13
• /
• 2020

Purpose: Gaucher disease (GD), which is the most prevalent lysosomal storage disorder worldwide, is caused by mutations in the glucocerebrosidase gene (GBA). GD is divided into three clinical subtypes based on the appearance of neurological symptoms. Type 1 GD is a chronic non-neuronopathic disease, and types 2 and 3 are acute neuronopathic and chronic neuronopathic forms, respectively. Neuronopathic GD types 2 and 3 are characterized by increased levels of glucosylceramide (GlcCer) and glucosylsphingosine (GlcSph) in the brain, leading to massive loss of neurons. Methods: DNA damage and subsequent apoptosis of H4 cells were observed following neuroglioma H4 cell culture with GlcCer or GlcSph. Neuronal cell apoptosis was more prominent upon treatment with GlcSph. Results: When H4 cells were treated with GlcSph in the presence of tubacin, a histone deacetylase 6 inhibitor (HDAC6i), attenuation of both DNA damage and a reduction in the protein expression levels of GlcSph-induced apoptosis-associated factors were observed. Conclusion: These findings indicated that GlcSph played a prominent role in the pathogenesis of neuronopathic GD by inducing apoptosis, and that HDAC6i could be considered a therapeutic candidate for the treatment of neuronopathic GD.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.204-211
• /
• 2000

The $(Y,Gd)BO_3:Eu$ red phosphors for PDP application were synthesized by ultrasonic spray method and then their photoluminance properties were investigated under 147nm VUV irradiation. The precursor solution of acetates of Y, GD and Eu and boric acid diluted in water was sprayed using 1.7 MHz ultra-sonic sprayer into the reaction tube held at high temperature. The as-sprayed particles were amorphous phase having C-C and C-H bonds due to the insufficient thermal reaction during the pass along the tube. But the sprayed samples followed by heat treatment at $1100^{\circ}C$ had the same crystal structure and chemical composition as those samples followed by solid state reaction. It was found that the $(Y_{0.7}Gd_{0.3})_{0.95} BO_3:Eu_{0.05}^{3+}$ phosphor particles synthesized by spray at $500^{\circ}C$ and then heat treated at $900^{\circ}C$ had a spherical-like shape and fine particle size at $0.7{\mu\textrm{m}}$ having a narrow size distribution, while the phosphor particles made by solid state reaction was $3{\mu\textrm{m}}$ coarse and non-uniform size distribution. The emitting intensity under 147nm VUV excitation for $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}^{3+}$ phosphor prepared by spray method was found to be higher than those phosphor made by solid state reaction and the commercial $(Y,Gd)BO_3:Eu$ product.

• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.685-695
• /
• 2007

The purpose of this study was to develop an excellent salad dressing using grape seed oil, which contains high levels of unsaturated fatty acids. First, a vinaigrette was made with grape seed oil and vinegar and divided into five portions. Then, five types of mirepoix au maigre ($M_1,M_2,M_3,M_4,M_5$) were made with apple, onion, carrot, garlic, tomato puree, and tomato ketchup by mixing in a main material vessel. The samples were then allowed to ripen for three days. The control group $M_1$ was named $GD_1$, and the experimental groups $M_2,\;M_3,\;M_4,\;and\;M_5$ were named $GD_2,\;GD_3,\;GD_4,\;and\;GD_5$. respectively. To measure receptiveness, a sensory test was conducted using a 7 point category scale. The test concentrated on flavor, taste, color, agreeability, aftertaste, and overall acceptability: the panel consisted of 15 subjects According to the results, $GD_4$ had the best flavor, color and agreeability. The samples with the most preferred taste and aftertaste were $GD_4\;and\;GD_5$. Between $GD_4\;and\;GD_5$, there were no noticeable differences in taste, aftertaste, or overall acceptability, but differences in color and agreeability did exist. Thus, $GD_4$ proved to be the most favorable product. To determine the best complementing vegetables for $GD_4$ yam($VE_1$), broccoli sprouts($VE_2$), mustard leaves($VE_3$), beet leaves($VE_4$), cucumber($VE_5$), and lettuce(VE6) were selected as samples, and a sensory test was conducted. Each vegetable has its own peculiarities. According to the results, $VE_2$ had the nicest vegetable fragrance recording the highest mean value. The vegetable with the most preferred taste, aftertaste, and agreeability were $VE_2\;and\;VE_6$. $VE_1\;and\;VE_6$ had the nicest color and contained the brightest color as well. The highest overall acceptability was awarded to $VE_2\;and\;VE_6$ and there was no remarkable difference between thorn at a level of 0.05. In conclusion, $VE_2\;and\;VE_6$ were the best complementing vegetables with grape seed oil dressing. However, to commercialize such a dressing, many follow-up studies must be conducted.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.90.1-90
• /
• 2003

• The monthly packaging world
• /
• s.89
• /
• pp.159-161
• /
• 2000

산업자원부가 주최하고 한국산업디자인진흥원(KIDP)이 주관하는 우수산업디자인(GD) 작품의 올해 수상자가 결정되었다. 85년부터 시작하여 16년 18회째가 되는 2000년 GD상품 선정에서는 총 685점이 접수되어 320점이 우수디자인상품으로 선정되고 이 중 39점이 수상의 영예를 차지했다. 포장부문에서는 80점이 출품되어 36점이 선정되고 수상상품으로 산자부장관상 1점, 한국산업지다인진흥원원장상 3점이 결정됐다. 올해 GD 상품은 디자인과 기술 양면

• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.27-35
• /
• 2017

The purpose of this study was to investigate the features of CsI:Tl and $Gd_2O_2S$ detectors with an indirect conversion method using phantom in the DR (digital radiography) system by obtaining images of thick chest phantom, medium thickness thigh phantom, and thin hand phantom and by analyzing the SNR and CNR. As a result of measuring the SNR and CNR according to the thickness change of the subject, the SNR and CNR were higher in CsI:Tl detector than in $Gd_2O_2S$ detector when the medium thickness thigh phantom and thin hand phantom were scanned. However, when the thick chest phantom was used, for the SNR at 80~125 kVp and the CNR at 80~110 kVp in the $Gd_2O_2S$ detector, the values were higher than those of CsI:Tl detector. The SNR and CNR both increased as the tube voltage increased. The SNR and CNR of CsI:Tl detector in the medium thickness thigh phantom increased at 40~50 kVp and decreased as the tube voltage increased. The SNR and CNR of $Gd_2O_2S$ detector increased at 40~60 kVp and decreased as the tube voltage increased. The SNR and CNR of CsI:Tl detctor in the thin hand phantom decreased at the low tube voltage and increased as the tube voltage increased, but they decreased again at 100~110 kVp, while the SNR and CNR of $Gd_2O_2S$ detector were found to decrease as the tube voltage increased. The MTF of CsI:Tl detector was 6.02~90.90% higher than that of $Gd_2O_2S$ detector at 0.5~3 lp/mm. The DQE of CsI:Tl detector was 66.67~233.33% higher than that of $Gd_2O_2S$ detector. In conclusion, although the values of CsI:Tl detector were higher than those of $Gd_2O_2S$ detector in the comparison of MTF and DQE, the cheaper $Gd_2O_2S$ detector had higher SNR and CNR than the expensive CsI:Tl detector at a certain tube voltage range in the thick check phantom. At chest X-ray, if the $Gd_2O_2S$ detector is used rather than the CsI:Tl detector, chest images with excellent quality can be obtained, which will be useful for examination. Moreover, price/performance should be considered when determining the detector type from the viewpoint of the user.