• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.494-498
• /
• 2000

이 연구의 목적은 'Three-File' 방식에 의한 근관형성시 근관의 형태변화 및 전이정도를 분석하고 이를 기존의 근관형성방법과 비교하고자 하는 것이다. 만곡된 근관을 가진 투명한 레진블럭 상에서 'Three-File' 방식, crown-down방식 및 스테인레스강 화일에 의한 수동방식으로 근관형성을 시행하고 이를 똑같은 위치가 재현가능한 고정틀에 위치시킨 후 사진의 이중노출 기법을 이용하여 근관형성 전후의 근관의 형태변화 및 전이정도를 분석한 결과 다음과 같은 결과를 얻었다. 1. 스테인레스강 화일의 경우 근관확대가 가장 컸고 근관의 전이정도도 심하였으며, 형성된 근관이 taper하지 못하고 불규칙한 형태를 보였다. 2. Profile로 crown-down방식에 의해 형성한 경우 taper한 근관형태를 보였고, 근관의 전이 정도도 스테인레스강 화일의 경우보다 작았다(p<0.01). 3. Profile로 'Three-File'방식에 의해 형성한 경우 taper한 근관형태를 보였고 근관의 전이정도도 스테인레스강 화일의 경우보다 유의하게 작았으나(p<0.01), crown-down방식에 의해 형성한 경우와 유의할 만한 차이는 없었다(p>0.01).

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.268-278
• /
• 2004

In this paper, we describe our experience in the design and implementation of the SMART file system to handle multimedia workload. Our work has three design objectives: (ⅰ) efficient support for sequential workload, (ⅱ) avoiding disk fragmentation, (ⅲ) logical unit based file access. To achieve these three objectives, we develop a file system where a file consists of linked list of Data Unit Group. Instead of tree like structure of the legacy Unix file system, we use single level file structure. Our file system can also access the file based upon the logical unit which can be video frame or audio samples. Data Unit Group is a group of logical data units which is allocated continuous disk blocks. At the beginning of each Data Unit Group, there exists an index array. Each index points to the beginning of logical data units, e.g. frames in the Data Unit Group. This index array enables the random access and sequencial access of semantic data units. SMART file system is elaborately tailored to effectively support multimedia workload. We perform physical experiments and compare the performance of SMART file system with EXT2 file system and SGI XFS file system. In this experiment, SMART file system exhibits superior performance under streaming workload.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.457-464
• /
• 2014

Recently, interests in space information data are increasing due to the initiation of spatial information open platform service by the Ministry of Land, Infrastructure and Transport. The purpose of this study is optimizing management and storing of the texture data, one kinds of 3D-spatial data. First, extract 3D-spatial data through the aerial triangulation and 3D-writing using raw image taken with the Multi-directional aerial camera and the vertical aerial camera. And develop the method to create single texture data and related technique by align and place corresponding 3D-spatial data to optimal storage space. Through experiment, the results show effect of 8 times of storage capacity reduction compared to existing single-file storage method, additionally, new method can improve file management efficiency in comparison with multiple file storage method. The results of this study can be cornerstone of three-dimensional space information management when dealing with bulk data, and utilizations will be enhanced through the further studies and algorithm improvement.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.11-23
• /
• 2019

This paper designs and proposes a file conversion process to IFC file, the international standard file format for BIM, in order to ensure mutual compatability and manageability among users of commercial BIM modeling and design softwares in the civil engineering area. The proposed process insert additional properties consisting of the properties of quantity calculation codes and properties of CBS/OBS/WBS standard classification scheme, to the three dimensional object shape information of the converted IFC files, using add-in converters for commercial BIM modeling softwares. In addition, a process of integrated use of IFC files for open web-based quantity, process(4D), and construction cost(5D) management is additionally designed and implemented. Based on these works, the ultimate goal of this study is to propose a novel process for integrated use of open web-based quantity, process(4D), and construction cost(5D), from the design stage of BIM modeling to the final construction stage in the civil engineering area.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.126-138
• /
• 2008

This paper proposes the preservation method that can effectively process short messages at mobilePOST SMSC(Short Message Service Center) platform on CDMA(Code Division Multiple Access). There are three techniques for the preservation method. First one is shared memory technique where several processes within the system share same memory to process transmission of short messages with maximum performance. Second one is to back-up messages in shared memory to the file system to prevent lost during system initialization or other unstable period. Third technique is that when transmission of short message was completed, finished message is moved from the shared memory to relational database for accounting purposes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.58-64
• /
• 2012

Due to the influence of global oil prices, industrial productivity, which oil consumption is high, was significantly reduced. AC type of high-strength PHC piles is being manufactured through twice the steam curing process and this have resulted in a significant rise for product's manufacturing costs. NAC way other types of file manufacturing process has the advantage of reducing manufacturing costs by a turn of the steam curing. Nevertheless, because the initial strength be poor than that of AC method, shipment is being after the curing period of approximately three days. In addition, the growth of the product enhance with curing period can not be avoided, as a result, cost of inventory is acting as the rise. Piles by the AC method is immediately shipped after curing, damaging problems does not occur when they are introduced to the field site (for example, pile on-site). In the case of NAC, however, at least after the curing period of three days and after expressing the strength of 80 MPa or more, they are shipped on the scene. Therefore, NAC type has problems as follows: (1) increase in moderate inventory holding costs with type and (2) breakage in the field due to lack of strength. In this study, for NAC-typed PHC files, mixing characteristics research for the strength development at 1 day equivalent to AC method were conducted and strength characteristics with changes of original materials were evaluated were also identified.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.55-66
• /
• 2004

Recently, as the personal computers are supplied rapidly, they formed the nucleus of the computer system. But, because of the easiness that anyone uses them to go near easily, it is the fact that the security of personal computer is weakness. So, in the paper, 1 propose the technical method that minimizes the loss and leakage of important data. This paper implemented a crypto system for security of data file on personal computer and assistance storage medium. The way of encryption/decryption is applied by complexity method which mixed Diffie-Hellman key exchange protocol, a typical RC4(Rivest Cipher version 4) algorithm of stream cipher and a typical MD5(Message Digest version 5) of Hash Function. For valuation implemented crypto system, three criteria is presented, which are crypto complexity, processing time and pattern matching. And according to analysis the three criteria the crypto system is verified the security, efficiency and usefulness. The crypto system is programmed with Visual C++ language of Microsoft. And so, as this is software system, we shall have a technical security system at a minimum cost for all personal computer.

• Korean Journal of Cognitive Science
• /
• v.31 no.1
• /
• pp.1-23
• /
• 2020

This paper introduces SNUDM, an analysis program for Ratcliff's diffusion model, which has been one of the most important models in cognitive psychology over the past 35 years and which has come to occupy an important place in cognitive neuroscience in recent years. The analysis tool is designed with the basic principles of easy comprehension and simplicity in use. A diffusion process was programmed as the limit of a simple random walk in a manner resembling Ratcliff & Tuerlinckx(2002). The response time distribution of the model was constructed by simulating the time taken by a random walk until it reaches a threshold with small steps. The optimal parameter values in the model are found to be the smallest value of the chi-square values obtained by comparing the resulting distribution and the experimental data using Simplex method. For simplicity and ease of use, the input file used here is created as a file containing the quantile of the reaction time, the trials and other information. The number of participants and the number of conditions required for such work programs are given in a way that answers the question. Using this analysis tool, the experimental data of Ratcliff, Gomez, & McKoon(2004) were analyzed. We found the very similar pattern of parameter values to Ratcliff et al.(2004) found. When comparing DMAT, fast-dm and SNUDM with the generated data, we found that when the number of trials is small, SNUDM estimates the boundary parameter to a value similar to fast-dm and less than the DMAT. In addition, when the number of trials was large, it was confirmed that all three tools estimate parameters similarly.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.53-60
• /
• 2016

In this paper, we introduce the implementation and test results of a new method of correlated result storage to achieve the full performance of the Daejeon hardware correlator. Recently, the observation of 8 Gbps speed, which is the maximum observational standard of KVN(Korean VLBI Network), has been performed. The correlation processing using the Daejeon hardware correlator is also required. Therefore, a new correlation result storage introduction has become necessary. The maximum correlation result output speed of the Daejeon hardware correlator is 1.4 GB/sec per 25.6 ms integration time. The conventional correlation result storage system can not cope with the maximum correlation output speed of the Daejeon hardware correlator, and the output speed is limited to 1/4. That is, among the four input ports of the Daejeon hardware correlator, the three inputs are limited to correspond to the observation rate of 1 Gbps. This new storage system uses the Gluster file system among many of the latest technologies used in storage systems. In tests that meet the maximum output rate of 1.4 GB/sec for the Daejeon hardware correlator, 350 MB/sec for each of the four optical outputs, resulting in 1.4 GB/sec in total.

• Journal of Technologic Dentistry
• /
• v.45 no.1
• /
• pp.1-7
• /
• 2023

Purpose: To evaluate the marginal and internal fit of metal coping fabricated by a metal three-dimensional (3D) printer that uses selective laser melting (SLM). Methods: An extraoral scanner was used to scan a die of the prepared maxillary right first molar, and the coping was designed using computer-aided design software and saved as an stereo lithography (STL) file. Ten specimens were printed with an SLM-type metal 3D printer (SLM group), and 10 more specimens were fabricated by casting the castable patterns output generated by a digital light processing-type resin 3D printer (casting the 3D printed resin patterns [CRP] group). The fit was measured using the silicon replica technique, and 8 points (A to H) were set per specimen to measure the marginal (points A, H) and internal (points B~G) gaps. The differences among the groups were compared using the Mann-Whitney U-test (α=0.05). Results: The mean of marginal fit in the SLM group was 69.67±18.04 ㎛, while in the CRP group was 117.10±41.95 ㎛. The internal fit of the SLM group was 95.18±41.20 ㎛, and that of the CRP group was 86.35±32 ㎛. As a result of statistical analysis, there was a significant difference in marginal fit between the SLM and CRP groups (p<0.05); however, there was no significant difference in internal fit between the SLM group and the CRP group (p>0.05). Conclusion: The marginal and internal fit of SLM is within the clinically acceptable range, and it seems to be applicable in terms of fit.