• Korean Journal of Culture and Social Issue
• /
• v.19 no.3
• /
• pp.507-528
• /
• 2013

The study examined the mental representation of children in foster care through the MacArthur Story Stem Battery (MSSB) and reviewed difference between children in foster care and typical children in terms of mental representation. Subjects of the study included a total of 50 children: 25 children (11 boys and 14 girls), aged from 5 to 8, in foster care in Gyeonggi Province, and 25 typical children (11 boys and 14 girls), aged from 5 to 8, who lived in Seoul and Gyeonggi Province. The research findings are summarized as follows: First, in terms of mental representation, children in foster care showed less subjects of empathic relations and more subjects of disorganized aggression than typical children. Second, children in foster care showed lower coherence mental representation than typical children. Finally, children in foster care were more likely to fail in emotional regulation than typical children in mental representation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.296-296
• /
• 2022

This study was investigated to compare the milling and physicochemical characteristics of six Korean wheat cultivars (Keumkang, KK; Jokyung, JK; Goso, GS; Joongmo2008, JM; Baekkang, BK; Saekeumkang, SKK) and five foreign wheat classes (Australian standard white wheat, ASW; Australian hard, AH; US northern spring, NS; US hard red winter, HRW; Soft wheat, SW). Korea and foreign wheat grains were milled using a Buhler MLU-202. Flour moisture, ash, protein, gluten, sedimentation, particle size, solvent retention capacity (SRC) and dough properties of flour were analyzed. Results showed that the hard wheats had a greater total flour yield and reduction fraction yield than the soft wheats regardless of the country. However, there were in the milling characteristics between the US and Korean soft wheats. GS, a soft wheat in Korea, had the lowest flour yield (59.6%) and the highest bran fraction yield (21.4%). The particle sizes of flour by milling fraction were B1>B2>B3 for the largest, and the R1〈R2〈R3 for the smallest. Particle size, ash, protein contents and the values of lactic acid SRC showed highly correlated with flour yield. The gluten-performance-index (GPI) is the ratio of the lactic acid SRC value to the sum of sodium carbonate and sucrose SRC values, and it has been used as a quality indicator for overall performance potential of flour. GPI values differed depending on the wheat variety or class, JM (0.82) was the highest value, and SKK (0.56) and SW (0.59) were low. The curve pattern of the Mixolab result also gives a quality indication of the flour sample. JM and NS flour had similar pattern at water absorption and gluten strength parameters and BK and HRW had similar viscosity patterns. These results will enable further study for blending Korean wheat cultivar to improve the flour quality.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.298-298
• /
• 2022

Milling is an important process that determines the quality of flour and is affected by milling machine type, scale, and tempering conditions. In addition, seed hardness is an important factor in determining the amount of tempering water and has been reported to affects flour yield and flour quality. There are reports that vitreousity is used as a measure to distinguish between soft and hard seeds, and the higher the vitreousity, the higher the protein contents. However, there is no established system for measuring viterousity of seeds and studies on the vitreousity and quality characteristics of flour are insufficient. Therefore, in this study, vitreousity, hardness, and milling characteristics were evaluated for 46 major domestic varieties, and their relationship was confirmed. After cutting the seeds using a seed cutter, vitreousity was measured, and seed hardness and flour particle size was measured using SKCS and PSI, respectively. As for the seed hardness index, 'Joa' was the lowest with 11.6, 'Yeonbaek' was the highest with 78.7. As for the milling yield, 'Saeol' had the lowest at 58.1%, and 'Hcjoong' had the highest at 88.6%. Seed hardness index and wheat flour production showed a high positively correlation, showing a similar to that of previous studies. Also, in flour particle size, 'Gobun' was the largest at 75.5 pm, and 'Joa' was the smallest at 43.1 um. Flour yield and flour particle size showed a high positively correlation. As a result of vitreousity, 'Hwangeumal' (55.2%), 'Saekeumkang' (59.1%), 'Baekkang' (52.3%), 'Goso' (44.6%), and 'Joa' (19.2%) were showed. Seed hardness and vitreousity showed a high positively correlation. Also as the vitreousity increased, the flour yield also showed a tendency to increase. In addition, as the seed hardness increased, particle size of the flour yield also showed a tendency to increase. It is thought that this result can be used as a measure to determine the quality of flour with vitreousity. However, further analysis of wheat varieties and methods of analyzing vitreousity are needed.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.269-273
• /
• 2023

After participating in the Second Boer War in 1899, the Australian Army participated in world wars such as World War I, World War II, the Korean War, and the Vietnam War. To overcome the decline in the social recognition of soldiers and the continuous shortage of troops caused by the protracted war, the status and role of female personnel were expanded. The use of female manpower, which started as medical support during the Second Boer War, expanded to combat support missions such as communications, maintenance, driving, secret document management, and radar surveillance during World War II. After the Vietnam War, the Chiefs of Staff of the Australian Army, Navy and Air Force established a committee to expand women's participation in the military, improved service conditions for female personnel and supplemented regulations so that they were treated as soldiers, not women, and reached a turning point in expanding the role of female personnel in the Australian military. As a result, all combat positions, including special forces, were opened to women in 2014, and a plan was established to increase the proportion of women in each service by 2030. As a result, all combat positions, including special forces, were opened to women in 2014, and the Australian Armed Forces set a plan to increase the proportion of women by 2030. Like the Australian military, South Korea is also experiencing a demographic cliff and shortage of troops due to the continuing low birthrate problem. Through the history and current state of the use of female personnel in the Australian military, we would like to draw implications for the direction our military should go.

• Biomolecules & Therapeutics
• /
• v.31 no.6
• /
• pp.599-610
• /
• 2023

According to recent evidence, ferroptosis is a major cell death mechanism in the pathogenesis of kidney injury and fibrosis. Despite the renoprotective effects of classical ferroptosis inhibitors, therapeutic approaches targeting kidney ferroptosis remain limited. In this study, we assessed the renoprotective effects of melatonin and zileuton as a novel therapeutic strategy against ferroptosis-mediated kidney injury and fibrosis. First, we identified RSL3-induced ferroptosis in renal tubular epithelial HK-2 and HKC-8 cells. Lipid peroxidation and cell death induced by RSL3 were synergistically mitigated by the combination of melatonin and zileuton. Combination treatment significantly downregulated the expression of ferroptosis-associated proteins, 4-HNE and HO-1, and upregulated the expression of GPX4. The expression levels of p-AKT and p-mTOR also increased, in addition to that of NRF2 in renal tubular epithelial cells. When melatonin (20 mg/kg) and zileuton (20 mg/kg) were administered to a unilateral ureteral obstruction (UUO) mouse model, the combination significantly reduced tubular injury and fibrosis by decreasing the expression of profibrotic markers, such as α-SMA and fibronectin. More importantly, the combination ameliorated the increase in 4-HNE levels and decreased GPX4 expression in UUO mice. Overall, the combination of melatonin and zileuton was found to effectively ameliorate ferroptosis-related kidney injury by upregulating the AKT/mTOR/ NRF2 signaling pathway, suggesting a promising therapeutic strategy for protection against ferroptosis-mediated kidney injury and fibrosis.

• Korean Journal of Acupuncture
• /
• v.40 no.4
• /
• pp.156-168
• /
• 2023

Objectives : This study aimed to determine the status of thermal stimulation devices approved in Korea for medical applications over the past 10 years, and based on this, to obtain insight for future thermal treatment in Korean medical institutions. Methods : We searched the item classification list entitled "Regulations on Medical Device Items and Rating by Item" from the Ministry of Food and Drug Safety Notice No. 2021-24, 2021 (Enforced March 19, 2021; www.mfds.go.kr) for individually licensed heaters using the terms "heat" and "heating". Results : We identified 17 items of thermal stimulation product group, of which 1,308 devices were licensed by February 4, 2022, and 53.2% of them (n=696) were devices with valid permits for distribution in Korea. Among the licensed devices, heating pad systems under/overlay (electric, home use) were approved the most, but combinational stimulator (for medical use, home use; Grade 2) accounted for the highest percentage among the current valid permission. Moxibustion apparatuses were licensed separately for electrical use and non-electrical use, and occupied a low percentage of the total devices. We analyzed 307 devices that were accompanied by technical documents and found that the heat sources were wires in 145 (47.2%), infrared rays in 44 (14.3%) and ultrasonic waves in 42 (13.7%) devices. Most (83.1%) devices were used for pain relief, while other applications included beauty, cancer treatment, maintenance of infant body temperature, and healing fractures. Conclusions : Thermal stimulation devices accounted for about 0.9% of all medical devices, and among them, combinational stimulators and heating pad systems under/overlay had the most valid permits. Thermal stimulation devices using heating wires and infrared rays were the most prevalent, and most were used to relieve pain. In order to develop a range of thermal stimulation devices that can be utilized in Korean medical institutions, it is imperative that they have potential applications beyond pain management, addressing various medical purposes. To achieve this, foundational research is necessary to effectively apply diverse heat sources based on medical objectives.

• Journal of Service Research and Studies
• /
• v.13 no.4
• /
• pp.24-46
• /
• 2023

This study sought to examine how internal market orientation of service organizations affects the service providers' adaptive service behavior and to determine what psychological processes go through for this purpose. To achieve this purpose, based on previous research, a research model was set up to predict that internal market orientation of service organizations will increase service providers' adaptive service behavior by continuously mediating the psychological processes of person-environment fit and work engagement. To test the hypothesis, a survey was conducted and data were collected from nutritionists at consignment catering companies located in Busan and Gyeongnam. As a result of testing the hypotheses proposed in this study's research model, internal market orientation increased person-job fit and person-organization fit, which are key elements of person-environment fit. And, it was confirmed that person-job fit and person-organization fit have a positive effect on work engagement. Additionally, work engagement improved service providers' adaptive service behavior. Lastly, this study confirmed that the influence of internal market orientation on adaptive service behavior is continuously mediated by person-environment fit and job enthusiasm.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.3
• /
• pp.1-15
• /
• 2023

This study focuses on modeling the impact of ammonia leakage from the storage tank in a combined cycle power plant's flue gas denitrification facility. It employs accident impact assessments and diffusion models to determine the optimal scenarios for ammonia storage tank leakage accidents. The study considers the operating conditions of variables as standard conditions for predicting the extent of damage. The Taean combined cycle power plant is chosen as the target area, taking into account seasonal factors such as temperature, humidity, wind speed, atmospheric stability, and wind direction. By utilizing a Gaussian diffusion model, the concentration of ammonia gas at various locations is estimated to assess the potential extent of external damage resulting from a leak. The study reveals that in conditions of high temperature and stable atmosphere within the specified range, lower wind speeds contribute to increased damage to the human body due to ammonia diffusion.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.790-797
• /
• 2023

Guar gum is an edible starch extracted from Cyamopsis tetragonolobus and used as an auxiliary ingredient to enhance the viscosity and adhesiveness of food and improve its emulsification stability. Here, characteristics of fish surimi mixture with various added amounts (0, 0.23, 0.45, 0.67, and 0.89 wt%) of guar gum were analyzed. In unheated surimi with guar gum, the pH decreased as the content increased. In the color values analysis, only the b^* (yellowness) increased depending on the amount of added guar gum. The firmness increased with increasing guar gum content, and no significant difference in adhesiveness was observed. In heated surimi, a^* (redness) and b^* decreased in a content-dependent manner, and L^* (lightness) was higher than that of unheated surimi. Regarding physical properties, the highest values of hardness, gumminess, and chewiness were observed in the heated surimi with 0.67 wt% of guar gum. However, no significant change was observed in springiness and cohesiveness. Results of sensory evaluation indicated that with higher guar gum content, only the hardness increased slightly, and significant differences were absent in the remaining parameters. Thus, surimi with 0.67 wt% of guar gum is considered to be optimal for 3D printing.

• Journal of Animal Science and Technology
• /
• v.65 no.6
• /
• pp.1323-1340
• /
• 2023

There are several factors that affect the welfare and meat quality of pigs during pre-slaughter transport. Among various factors, the effects of weather conditions and loading density were studied. A total of 3,726 finishing pigs were allotted to one of nine groups arranged in a 3 × 3 factorial design according to the weather conditions (low temperature [LT], under 10℃; normal temperature [NT], 10℃-24℃; high temperature [HT], upper 24℃), and loading density (low density [LD], upper 0.43 m²/100 kg; normal density [ND], 0.37-0.43 m²/100 kg; high density [HD], under 0.37 m²/100 kg). Each treatment group follow as: LTLD, LTND, LTHD, NTLD, NTND, NTHD, HTLD, HTND, HTHD. In terms of carcass composition, pigs had the highest carcass weight and backfat thickness at LT. Comparing the HD transport to the ND transport, the meat quality indicated a lower pH and more drip loss. The incidence rate of pale, soft, exudative (PSE) pork was high in the order of the HD, LD, and the ND transport (20%, 9%, and 2%, respectively). The HT transport showed the lowest pH and greatest L^* value under the given weather conditions. Pigs transported under the HTHD and LTLD conditions had the greatest rates of PSE pork (40% and 20%, respectively). Pigs exposed to HD transport had the shortest laying time and the highest overplap behavior. The LDLT transport pigs had a shorter laying time than the LDNT and LDHT transport pigs. In conclusion, too high or too low density transport is generally not excellent for meat quality or animal welfare, however it is preferable to transport at a slightly low density at high temperature and at a slightly high density at low temperature.