• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.107-113
• /
• 2010

In this study, the relative effects of low-chloride deicier(LCD) and two other deicing agents on the scaling of concrete were conducted in a series of tests at laboratory accordance with the ASTM C 672. The solutions concentration of deicers tested included 1, 4, 10%. Tap water was used as control. The amount of scaling was evaluated gravimetrically. As test result of deicer solution types, when applied to 4% solutions, surface scaling of concrete after 56 freeze-thaw cycles was produced significantly as about 9 times on LCD solution, as about 18 times on $CaCl_2$ solution, and as about 33 times on NaCl solution comparing with tap water. As test result of deicer solution concentrations, relatively low concentrations (of the 4% by weight) of deicer were produced more surface scaling than higher concentrations (of the 10% by weight) or lower concentrations (of the 1% by weight) of deicer. It show that the damaging concentration is of the order of 3~4% for previous research result. It appears that the mechanism of surface scaling is primarily physical rather than chemical. Also, the effect of chloride deicier types, freeze-thaw cycling, and air contents on the performance of concrete was experimentally investigated. The results show that the concrete specimens subjected to freeze-thaw cycling scaled more severely in exposure to deicing salt than those in non-exposure to deicing salt, weight losses of the specimens tested in exposure to deicing salt were twice as much as those tested in non-exposure to deicing salt. Relative dynamic modulus of elasticity of concrete specimens decreased more quickly in exposure to deicing salt than in non-exposure to deicing salt. Also, relative dynamic modulus of elasticity of concrete specimens in exposure to sodium chloride deicing salt was decreased more quickly comparing with exposure to LCD salt. It is also shown that the chloride contents according to concrete specimen depths was more largely in exposure to LCD salt. When concrete specimen is exposed to chloride deicing salts and freeze-thaw cycling, performance degradation in the entrained air concrete(AE concrete) retarded more considerably comparing with non-entrained air concrete(Non-AE concrete).

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.213-219
• /
• 2007

The purpose of this study is to evaluate shielding effect of radiation protector for interventional radiologists in procedures by measuring inside and outside of radiation protector. In this study, we measured the radiation dose of 4 interventional radiologists during TACE and PTBD procedure for 4 month(2005.05-2005.09). Absorbed dose were measured by TLD placed underneath and over radiation protector such as Goggle, Thyroid protector, Apron and placed on the 4th finger of Hand. In addition, we measured background radiation dose in the control room using TLD. During TACE procedure, using 0.07 mmPb Goggle decreased average 53.8% of radiation dose rate in continuous fluoroscopic mode and decreased average 77.6% of radiation dose rate in pulse fluoroscopic mode. Using 0.5 mmPb Thyroid protector decreased average 88.9% of radiation dose rate in continuous fluoroscopic mode and decreased average 92.8% in pulse fluoroscopic mode. During PTBD procedure, using 0.07 mmPb Goggle decreased radiation dose rate average 62.7%, 87.9% by 0.5 mmPb Thyroid protector, 90.5% by 0.5 mmPb Apron. The average fluoroscopic time of PTBD was 6.14 min. shorter than TACE procedure, but radiation exposure dose rate of PTBD was 3 times higher in total body dose, and 40 times higher in hand dose rate than TACE. Interventional radiologists must wear thicker protector recommended over 0.5 mmPb. Also, they must use lead Goggle during interventional procedure. Abdomen dose decreased average 38.4% by drawing a lead curtain under the patient's table, therefore, they must draw a lead curtain to shield scattering ray. Radiation exposure dose decreased average 59.0% by using pulse fluoroscopic mode. So radiologists would better use pulse fluoroscopic mode than continuous fluoroscopic mode to decrease exposure dose.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.8-17
• /
• 2006

Laboratory scale experiments were performed to investigate the removal efficiency of the in-situ chemical oxidation method and the air-sparging method for diesel contaminated soil and groundwater. Two kinds of diesel contaminated soils (TPH concentration : 2,401 mg/kg and 9,551 mg/kg) and groundwater sampled at Busan railroad station were used for the experiments. For batch experiments of chemical oxidation by using 50% hydrogen peroxide solution, TPH concentration of soil decreased to 18% and 15% of initial TPH concentration. For continuous column experiments, more than 70% of initial TPH in soil was removed by using soil flushing with 20% hydrogen peroxide solution, suggesting that most of diesel in soil reacted with hydrogen peroxide and degraded into $CO_2$ or $H_2O$ gases. Batch experiment for the air-sparging method with artificially contaminated groundwater (TPH concentration : 810 mg/L) was performed to evaluate the removal efficiency of the air-sparging method and TPH concentration of groundwater decreased to lower than 5 mg/L (waste water discharge tolerance limit) within 72 hours of air-sparging. For box experiment with diesel contaminated real soil and groundwater, the removal efficiency of air-sparging was very low because of the residual diesel phase existed in soil medium, suggesting that the air-sparging method should be applied to remediate groundwater after the free phase of diesel in soil medium was removed. For the last time, the in-situ box experiment for a unit process mixed the chemical oxidation process with the air-sparging process was performed to remove diesel from soil and groundwater at a time. Soil flushing with 20% hydrogen peroxide solution was applied to diesel contaminated soils in box, and subsequently contaminated groundwater was purified by the air-sparging method. With 23 L of 20% hydrogen peroxide solution and 2,160 L of air-sparging, TPH concentration of soil decreased from 9,551 mg/kg to 390 mg/kg and TPH concentration of groundwater reduced to lower than 5 mg/L. Results suggested that the combination process of the in-situ hydrogen peroxide flushing and the air-sparging has a great possibility to simultaneously remediate fuel contaminated soil and groundwater.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.185-191
• /
• 1974

Incubation and pot studies were conducted with upland soils for a study on determination of the lime requirement based on exchangeable alumium content. The results obtained are as follows; 1. Results of chemical analysis of upland soils show that pH varies from 5.0 to 5.4, and exchangeable Al moves with the range of 1.3-3.0m.e/100gr. Exchangeable Al decreases with years of cultivation. 2. Incubation studies shows that on acid mineral soils almost all exchangeable Al, on average 95% was neutralized with the lime to neutralized 100% exchangeable Al. On volcanic ash soil, however, only 65.5% was neutralized with the lime estimated to neutralize the equivalent of 200% exchangeable Al. The latter has required more lime. 3. The pH of mineral soils is on the average increased from an initial 5.2 to 6.3 when 95% of exchangeable Al is neutralized, whereas that on volcanic ash soil is increased from an initial 5.3 to 5.5 only when lime is applied at rate to neutralize the equivalent of 200% exchangeable Al. 4. A high correlation coefficient (r=0.99) was obtained between exchangeable Al and exchangeable acidity. This indicates that exchangeable acidity is primarly a result of exchangeable Al. 5. In pot experiments with soybean cultivated on one of the hill land soils (Songjoong soil) the application of fused phosphate and triple superphosphate based on a 5% saturation rate ($P_2O_5$ 32.1 kg/10a) showed that the liming factor for calculation of the optimum lime requirements based on exchangeable acidity was 0.594 for fuses phosphate or 1.132 for tripple superphosphate, and optimum pH is approximately 6.0 and optimum neutralization rate of exchangeable Al is 80-90%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.4
• /
• pp.375-385
• /
• 1987

This study was carried out to investigate the effects of pesticides on soil respiration, microflora and enzymes in loam soil, and on pathogenic microorganisms in continuous pepper cropping soil. The results are summarized as follows. No significant effect of pesticides on soil respiration was shown, with the exception of propoxur which slightly increased at $10{\mu}g\;g^{-1}$ treatment. When pesticides were treated, the amount of soil microorganisms generally decreased at the early stage of incubation and the number of microflora was much more decreased at 60-day incubation. When pesticides were treated, the amount of soil enzyme activity was inhibited at the early stage of incubation and gradually recovered at the last stage of incubation. The amount of polygalacturonase activity was increased at the 20-and 30-day incubation in propoxur treatment plot. The amount of ${\beta}$-glucosidase and dehydrogenase activity was increased at 20-and 60-day incubation in carbofuran and acephate treatment plot. The amount of phosphatase activity was increased at 60-day incubation in propoxur and isoprocarb treatment plot. The amount of Fusarium generally decreased in continuous pepper cropping soil, with the exception of isoprocarb and acephate treatment plot which significantly increased. The amount of Pythium increased at 60-day incubation with the exception of captan treatment plot which significantly decreased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.350-357
• /
• 2001

This study was performed to evaluate an effect of soil water retention and chinese cabbage growth on application of super water absorbent(CPAM-AS-hyd). In seedling experiments, the CPAM-AS-hyd application rates were 0, 5 and 10kg/10a in bed soil of experimental field. The emergence percentage of chinese cabbage was increased by 9% with application of CPAM-AS-hyd otherwise emergence rates was delayed by 1 day. Water content in soil with CPAM-AS-hyd(10kg/10a) was 27.6%(v/v) at 10days after irrigation and that of control was 20.7%. The CPAM-AS-hyd application caused to alleviate wilting point by 5 days. The content of NO3-N in bed soil was increased with CPAM-AS-hyd application. In the field experiments, as the CPAM-AS-hyd application rates were 5kg/10a and 10kg $10a^{-1}$, the irrigation amounts applied during the growth periods were 1.87 ton, 1.65 ton and 1.53 ton at-0.2bar irrigation frequence and 1.38 ton, 1.25 ton and 1.15 ton at -0.5bar for growth period control, in the CPAM-AS-hyd of 5kg $10a^{-1}$ and CPAM-AS-hyd of 10kg $10a^{-1}$ plot, respectively. The CPAM-AS-hyd application caused to increase yield of chinese cabbage by 9~34% as compared to the control. The contents of $NH_4-N$ and $NO_3-N$ in soil were decreased with the CPAM-AS-hyd application in 10 days after transplanting of chinese cabbage, but the contents of those in soil were increased with the CPAM-AS-hyd application as compared to the control in 20 days after transplanting. The T-N, CaO, MgO and $K_2O$ contents in chinese cabbage increased due to the CPAM-AS-hyd application however $P_2O_5$ content was similar to the control.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.37-45
• /
• 1970

The processing management forms of our country's filature factories in 1969 are summarized as follows. (1) About 80％ of total cocoon collection is made within 5 days involving peak day, and 10％ of cocoon collection is finished until 3 days before and after the peak day, (2) About 92％ of alive cocoons transported on unpaved road, and about 40％ of the cocoons purchased by all factories are loaded on trucks from common selling station which is far beyond 40km, therefore a new packing system of alive cocoons to drop the damage of cocoon qualities, should be taken. (3) 22％ of all factories in our. country have only low-temperature cocoon drying machine. Therefore the installment of hot-air cocoon drying machine is required urgently. (4) In view of cocoon qualities in our country, the grouping method of cocoon for reeling. taken by about 50％ of the factories at percent, which classify cocoons for reeling as high group (1,2,3,4 grades) and low group(5,6 grades), will have to be replaced by the method tat classify them high group (1,2 grades) middle group (3,4 grades), low group (5,6 grades). (5) The .ratio of cocoon assorting stood about 10％ in multi-ends reeling, about 15％ in automatic reeling, conclusively, the ratio of cocoon assorting for automatic reeling was higher tan that for multi-ends reeling. One person's ability for a day in cocoon assorting reaches to about 80-100kg. (6) Cocoon cooking condition requires the increase of the cooking time, the pressure and temperature used to be prolonged as much as the qualities of cocoons are material cocoon ior automatic and double cocoon machines are treated uncompletely. (7) Automatic silk reeling is being performed at 1-2$^{\circ}C$ lower in reeling water temperature and operated at about twice velocity. (8) The temperature and humidity of rereeling room stood at 25$^{\circ}C$, 67.2％ R.H and 32.3$^{\circ}C$, 51.9％ R.H of rereeling machine are showed, Average rereeling velocity is 233m/min and large reefs charged for one person are 7.5 reels and form of skein used in all factories is double skein. (9) About 73％ of water sources for filature used under-earth water. About 48％ of all filature factories in our country have not yet water purifying equipments. Installation of the equipment for these factories seems to be urgent, (10) Denier .balance, sizing reel, seriplane, are being used in most factories as self-inspection apparatus. (11) More than 90％ of the factories use the vacum tank in rereeling process and about 20％ of them use it in cocoon cooing process (12) Only 21％ of the factories use chemicals in filature process. About all them use "Seracol 100" in cocoon cooking process and "Seracol 500" in rereeling process, (13) Above survey results explain each all factories show large difference in the processing management. Therefore, it is believed that intercommunication through seminar or technical exchange will contribute to the production evaluation of cocoon in our filature industry.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.88-97
• /
• 2009

This study was conducted to obtain the basic information to increase the practical use of soil survey data through the subdividing of lava shapes with soil sequences due to different elevations in Jeju. The numbers of soil series of lava topography had occupied many of whole soil series in Jeju. When its topography subdivide, it give more detailed soil information. The obtained results are as follows; The lava topography to subdivide lava topography were studied with 38 soil series according to elevation in Jeju. Division of elevation are less than 50m, 50m to 200m, and 200m to 400m and more than 400m. Name the depending on elevation, less than 50m is called lower part of lava, 50m to 200m is called middle part of lava, and 200m to 400m and more than 400m are called upper part of lava. The characteristics of lava subdivide are as follows; soil family texture of lower part of lava is fine silty to clayey, drainage classes are various, average of available soil depth is 75.3cm, average of gravely contents are 11.6%, average of slopeness is 7.2%, limiting factor are various and soil order are various. soil family texture of middle part of lava is fine silty to coarse silty, drainage classes are well to very well, average of available soil depth is 65.9cm, average of gravely contents are 14.7%, average of slopeness is 11.3%, limiting factor are ashy and soil order are Andisols and Inceptisols. Soil family texture of upper part of lave is fine silty, drainage classes are well, average of available soil depth is 72.8cm, average of gravely contents are 16.0%, average of slopeness is 14.9%, limiting factor are ashy and skeletal, and order are Andisols.

• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.357-367
• /
• 1997

Purpose : To identify variable prognostic factors and analyse failure patterns in the uterine cervix cancer after radical operation and adjuvant radio-therapy, a retrospective analysis was undertaken. Materals and Methods : I analysed one hundred and twenty four patients with uterine cervix cancer, FIGO stage IB, IIA and IIB, treated with radical hysterectomy and pelvic lymph node dissection followed by adjuvant radio-therapy between May 1985 and May 1994. Minimum follow up period was 24 months. All of them were treated with full dose external radiotherapy with linear accelerator and/or high dese rate intracavitary radiation. Results : Overall 5 year survival rate and relapse free survival rate were $75.4\%,\;73.5\%$, respectively. Significant prognostic factors by relapse free survival were wall involvement thickness, lymph node location and number, parametrium involvement, tumor size, stage, uterine body involvement, vaginal resection margin involvement. By multivariate analysis, lymph node matastasis. tumor size and vaginal resection margin involvement were significant prognostic factos. Treatment related failure were 33 cases. Locoregional failure were more likely in the stage IIB, lymph node positive or vaginal resection margin positive patients whereas distant failures were relatively more frequent in stage IB, IIA and lymph node, vaginal resection negative patients. In stage IIB, 5 year relapse free survival rate was only $56\%$ and nine of twenty two patients recurred. Conculsion : Postoperative radiotherapy results are good for patients with relatively low risk factor. But the results are poor for patients with multiple, high risk factors or stage IIB. To control recurrence for patients with high risk factors, postoperative adjuvant radiotherapy is not sufficient treatment method. To raise control rate adding other methods such as radiosensitizing agent or chemotherapy is necessary and prospectively randomized study is needed for evaluation of postoperative radiotherapy efficacy and /or other methods. And it is reasonable to treat primary radical radiotherapy for patients with stage IIB cervical cancer instead of radical operation and adjuvant radiotherapy and/or chemotherapy regimen.

• Radiation Oncology Journal
• /
• v.21 no.2
• /
• pp.107-111
• /
• 2003

Purpose: To establish the role of stereoactic radiosurgery using a linear accelerator for the treatment of patients with cavernous angloma. Materials and Methods: Between February 1995 and May 1997, 11 patients with cavernous angioma were treated with stereotactic radiosurgery using a linear accelerator. Diagnoses were based on the magnetic resonance imaging in 8 patients, and the histological in 3. The vascular lesions were located on the brainstem (5 cases), cerebellum (2 cases) thalamus (1 case) and cerebrum (3 cases). The clinical presentation at onset included previous intracerebral hemorrhages (9 cases) and seizures (2 cases). All patients were treated with a a linac-based radiosurgery. The median dose of radiation delivered was 16 Gy ranging from 14 to 24 Gy, which was typically proscribed to the 80$\%$ isodose surface (range 50 $\~$ 80$\%$), corresponding to the periphery of the lesion with a single isocenter. Ten patients were followed-up. Results: The median follow-up was 49 months ranging from 8 to 73 months, during which time two patients developed an intracerebral hemorrhage, 1 at 8 months, with the other at 64 months post radiosurgery. One patient developed neurological deficit after radiosurgery, and two developed an edema on the T2 weighted images of the MRI surrounding the radiosurgical target. Conclusion: The use of stereotactic radiosurgery in the treatment of a cavernous angioma may be effective in the prevention of rebleedlng, and can be safely delivered. However, a longer follow-up period will be required.