• Title/Summary/Keyword: '-고'

Search Result 45,380, Processing Time 0.071 seconds

Power Signal Inter-harmonics Detection using Adaptive Predictor Notch Characteristics (적응예측기 노치특성을 이용한 전력신호 중간고조파 검출)

  • Bae, Hyeon Deok
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.10 no.5
    • /
    • pp.435-441
    • /
    • 2017
  • Detecting an inter-harmonic accurately is not easy work, because it has small magnitude, and its frequency which can be observed is not an integer multiple of fundamental frequency. In this paper, a new method using filter bank system and adaptive predictor is proposed. Filter bank system decomposes input signal to sub bands. In adaptive predictor, inter-harmonic is detected with decomposed sub band signal as input, and error signal as output. In this scheme, input-output characteristic of adaptive predictor is notch filter, as predicted harmonic is canceled in error signal, so detecting an inter-harmonic can be possible. Magnitude and frequency of detected inter-harmonic is estimated by recursive algorithm. The performances of proposed method are evaluated to sinusoidal signal model synthesized with harmonics and inter-harmonics. And validity of the method is proved as comparing the inter-harmonic detection results to MUSIC and ESPRIT.

The effect of telephone counseling hypertension self-management program for hypertensive patients with disabilities using the welfare center for the disabled (장애인 복지관을 이용하는 장애인 고혈압 환자 대상 전화상담 고혈압 자가관리 프로그램의 효과)

  • Park, Hyejung;Jang, Insun
    • Journal of the Korean Applied Science and Technology
    • /
    • v.37 no.4
    • /
    • pp.659-673
    • /
    • 2020
  • The purpose of this study was to identify the effectiveness of the 8-week telephone counseling hypertension self-management program provided through welfare center nurses and nursing student volunteers for hypertensive patients with physical disabilities and brain lesions who use the welfare centers for the disabled. A quasi-experimental with non-equivalent control group pretest-posttest design was implemented. From December 2019 to May 2020, data from 28 controls and 29 experimental groups who completed pre and post-investigation were analyzed using the SPSS program. As a result of the main study, after the intervention, the knowledge of hypertension, seriousness and sensitivity among the health beliefs, and quality of life EQ-VAS indicated significant difference between the experimental group and the control group. Therefore, efforts to improve self-care behaviors and quality of life by applying various self-care programs to hypertensive patients with the disabled which require long-term health care will be needed continuously.

The Components of Metabolic Syndrome according to the Resting Heart Rate in Hypertensive Patients without Cardiovascular Disease Complication after 12month Follow-up: First Visit and Revisit Hypertensive Patients (심혈관계 질환 합병증을 동반하지 않은 본태성 고혈압 환자의 안정시 심박수에 따른 대사증후군 세부 요인 변화에 대한 12개월 추적조사: 고혈압 초진과 재진)

  • Ok, Jong Sun
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.10
    • /
    • pp.401-410
    • /
    • 2020
  • This study is to conduct a 12-month f/u survey on changes of metabolic syndrome (MetS) components according to the resting heart rate (RHR) in patients with essential hypertension (HTN) without cardiovascular disease (CVD) complication. We used the KorHR (Korean Hypertension Registry) data and a total of 951 subjects were analyzed using the R statistical program. As a result of this study, it was found that the risk and changes of MetS components differs according to the RHR group with first and revisit hypertensive patients. Therefore, guidelines for customized RHR control for first and revisit hypertensive patients should be prepared. Also, it is necessary to prepare various interventions to control the RHR. Through this, it is intended to prevent the occurrence of CVD caused by HTN, which is a representative chronic disease, to improve the quality of life of patients and their families as well as to contribute to increasing the efficiency in the health care.

An experimental study on mechanical behavior of shield segment with high-strength concrete and high-tension rebar (고강도 콘크리트와 고장력 철근을 적용한 쉴드 세그먼트의 역학적 거동에 대한 실험적 연구)

  • Lee, Gyu-Phil;Park, Young-Taek;Choi, Soon-Wook;Bae, Gyu-Jin;Chang, Soo-Ho;Kang, Tae-Sung;Lee, Jin-Seop
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.14 no.3
    • /
    • pp.215-230
    • /
    • 2012
  • An experimental research on the possibility of using high-strength concrete with the design strength of 60 MPa and high-tension rebar with the yielding strength of 600 MPa instead of conventional reinforced concrete segment to reduce its production cost was performed. Full-scale bending tests on both conventional and high-strength reinforced concrete segments were carried out to compare their mechanical and structural behaviors of the segments under flexural action. From the experiments, it was shown that the failure load of high-strength reinforced concrete segment was approximately 30% higher than that of the conventional segment even though reinforcements in high-strength segment were reduced by 26%. The test result showed that the bearing capacity of high-strength segment highly increased by high-strength concrete and high-tension rebar. It also verified the high possibility of high-strength reinforced concrete segment as a technical alternative to reduce the production cost of segments in a shield tunnel.

A Novel saccharification method of uncooked concentrated corn starch using an agitated bead reaction system (분쇄마찰매체 함유 반응계를 이용한 무증자 Corn starch의 고농도 당화와 당화액의 조성에 관한 연구)

  • 이용현;조구형
    • Microbiology and Biotechnology Letters
    • /
    • v.14 no.5
    • /
    • pp.399-405
    • /
    • 1986
  • Corn starch was saccharified without cooking in an agitated bead reaction system. Uncooked corn starch was effectively hydrolyzed even at the concentration as high as 39%(w/v). After 24 hours. the extent of saccharification reached at 92%, which corresponds glucose concentration of 425g/L. Fed-batch feeding of starch was more effective than batch feeding for saccharification of uncooked corn starch. The composition of hydrolysated of uncooked starch was analyzed. which was composed of 95% glucose, 0.7% of maltose, and 4.5% of high saccharide, similar with that of cooked starch. The hydrolysate can be successfully utilized for HFCS manufacture. The starch liquefying and saccharifying enzyme was relatively stable even be the physical impact of the attrition-milling media. The enzyme stabilizer, $Ca^{++}$, played an essential role in preventing the enzyme deactivation caused by the physical impact.

  • PDF

Factors Affecting the Intention to Quit Smoking due to the Prevalence of Hypertension (고혈압 유병 여부에 따른 금연의사에 영향을 미치는 요인)

  • Shin, Jae-Deok;Lee, Sok-Goo
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.9
    • /
    • pp.503-510
    • /
    • 2020
  • The purpose of this study is to identify factors related to the intent of quit smoking in adult hypertension and normal group. Data are based on the National Health and Nutrition Survey from 2010 to 2018. The survey was performed on 1,981 male adults(Hypertension group 407, Normal group 1,574). In the hypertension group, single was 0.226 times lower in the will to intention to quit smoking than the group spouses. Also, high school graduation was 2.102 times higher than middle school graduation, and the worse the subjective health status was, the higher the intention was to quit smoking. It was also 5.427 times higher than when people did not walk if the day they walked for more than 10 minutes a day was one day of the week. The characteristics of hypertensive patients should be understood. In quit smoking education, it is necessary to recommend health exercises and proper exercise to patients. It should be used as the basis data for a quit smoking policy for efficient personalized management of hypertensive patients.

Development a High-Efficiency Induction Heating Heater using a 5[kW] Class Full-Bridge High Frequency Resonant Inverter (5[kW]급 풀-브릿지 고주파 공진형 인버터를 이용한 고효율 유도가열 히터 개발)

  • Kwon Hyuk-Min;Shin Dae-Cheul
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.10 no.5
    • /
    • pp.481-487
    • /
    • 2005
  • Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter, By using high frequency inverter high frequency alternative current in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. This paper proposes new fluid heating method. Which is operated as follows. Working coil, which is wrapped outside of pipeline, makes the eddy current. Inside of heating vessel in isolated pipeline the specially designed stainless metallic package is inserted, which can be heated by eddy current losses. And then In this paper are discussed action analysis and characteristics analysis of 5[kW] class full-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how high-efficiency heater is developed and application of system are also discussed.

Forest Structure in Relation to Altitude and Part of Slope in a Valley Forest at Chuwangsan Area (주왕산지역 계곡부의 해발고와 사면부위에 따른 산림구조)

  • 박인협;문광선;류석봉
    • Korean Journal of Environment and Ecology
    • /
    • v.8 no.2
    • /
    • pp.154-159
    • /
    • 1995
  • The Chuwang valley-Kumunkwangi valley forest in Chuwangsan area was studied to investigate forest structure in relation to altitude and part of slope. Forty eight quadrats were set up in the valley forest along altitude of 470m to 780m and part of the slope. Density and basal area of trees in tree strata decreased as increasing elevation. With increasing elevation the importance values of Quercus mongolica, Fraxinus rhynchophylla increased, while those of Pinus densiflora, Lindera obtussiloba decreased. As going from lower part to upper part of the slope, the importance values of Quercus valiabilis and Lindera obtussiloba increased while those of Fraxius rhynchophylla, Acer mono decreased. Species diversity tended to decreased as going to upper parts of the slope. The range of similarity indices between elevation belts, and parts of the slope were 74.4~84.2% and 68.0~96.3%, respectively. According to importance value and cluster analysis, the studied valley forest was classified into three forest communities of Pinus densiflora-deciduous tree species community of lower part of slope, Pinus densiflora-Quercus variabilis community of middle and upper part of slope, Pinus densiflora community of the top area.

  • PDF

Experimental Study on the Material Characteristics of Slag Cement with Various Phosphogypsum Materials (인산부산석고의 각 형태조건에 따른 슬래그 시멘트의 품질특성에 관한 실험적 연구)

  • Park, Jong-Tak;Oh, Hong-Seob
    • Journal of the Korea Concrete Institute
    • /
    • v.21 no.6
    • /
    • pp.729-735
    • /
    • 2009
  • In this study, it is experimentally verified a feasibility of the wasted phosphogypsum ($CaSO_4/H_2O$) that is a byproduct from the phosphoric acid process of manufacturing fertilizers can be applied as an admixture in slag cement. For the test, phosphogypsum is modified as dihydrate, hemihydrate, type III anhydrite, and type II anhydrite, and then chemical characteristics and mechanical properties of various slag cements containing above mentioned gypsum materials were analyzed. The test results show that the gypsum made at high temperature has better quality with decrease of water-soluble phosphoric acid ($S-P_2O_5$) which has an effect on the quality of cement. And type II anhydrite shows superior quality in terms of drying shrinkage and the compressive strength of cement paste with hemihydrate at 56 days is higher than other gypsum material.

A Study on Constructibility of heavyweight ballast concrete with recycled iron slag (폐분철을 이용한 고중량 밸러스트 콘크리트 제조 및 시공성에 관한 연구)

  • Park, Dae-Oh;Park, Young-Shin;Park, Jae-Myung
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.785-788
    • /
    • 2008
  • This study is focused on applying heavyweight concrete to ballast used to have stability of a ship. Generally, heavyweight concrete is made from a high density aggregate like magnetite or limonite. However, these materials are hard to obtain them from relevant companies and so expensive. Therefore, this study plans to product heavyweight ballast concrete which is easy to obtain by recycled iron slag. Heavyweight ballast concrete isn't required to meet some compressive strength in use, but it is required to have high flowable and 2.7t/m3 of bulk density to fill the ballast tank densely. The designed field mix proportion of concrete based on the results of pre-experiment shows it can control the temperature crack and has superior chloride corrosion resistance after conducting chloride corrosion experiment. Also, it is prefer that before airtightness voltile corrosion inhibiter(VCI) is added in airtight space of shipyard.

  • PDF