• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.1
• /
• pp.9-15
• /
• 2009

Purpose: We evaluated the device that was created for maintaining the patient's setup and protecting the testicles from scattered radiation during treatment of carcinoma of the penis. Materials and Methods: The phantom testicles were made of vaseline cotton gauze and the device consisted of 5 mm of acryl box and 4 mm of lead shielding. $3{\times}3\;cm^2$, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$, $6{\times}6\;cm^2$, $7{\times}7\;cm^2$ field sizes were used for this study and measurement was made at 4, 5, 6, 7, 8, 10 cm from the lower edge of the field for 10 times with lead shielding and without the shielding respectively. 200 cGy was delivered using 6 MV photons. Results: The scatted radiation without lead shielding at 4, 5, 6, 7, 8, 10 cm from the lower edge of the field were 14.8-4.7 cGy with $3{\times}3\;cm^2$, 15.7-5.2 cGy with $4{\times}4\;cm^2$, 17.6-5.5 cGy with $5{\times}5\;cm^2$, 19.9-6.6 cGy with $6{\times}6\;cm^2$, 22.2-7.6 cGy with $7{\times}7\;cm^2$ and the measured dose without lead shielding were 7.1-2.6 cGy with $3{\times}3\;cm^2$, 8.9-3.6 cGy with $4{\times}4\;cm^2$, 12.3-4.8 cGy with $5{\times}5\;cm^2$, 14.6-5.0 cGy with $6{\times}6\;cm^2$ and 21.1~6.4 cGy with $7{\times}7\;cm^2$. As shown above, the scatted radiation decreased after using lead shielding. Depending of the range of field sizes, the resulting difference between without shielding values and with shielding values were: 7.8-1.1 cGy at 4 cm, 5.1-1.2 cGy at 5 cm, 3.8-1.1 cGy at 6 cm, 3.4-1.7 cGy at 7 cm, 2.8-1.7 cGy at 8 cm, 2.4-2.5 cGy at 9 cm and 2.1-1.8 cGy at 10 cm. In the situation as described above, the range in values depending on the distance was 7.8-1.1 cGy with $3{\times}3\;cm^2$, 6.9-1.6 cGy with $4{\times}4\;cm^2$, 5.3-0.8 cGy with $5{\times}5\;cm^2$, 5.3-1.5 cGy with $6{\times}6\;cm^2$ and 1.1-1.8 cGy with $7{\times}7\;cm^2$. Conclusion: Using the device we created to shield the testicles from scattered radiation during treatment of carcinoma of the penis, we have found that scattered radiation to the testicles is decreased by the phantom testicles, and by increasing the distance between the testicles and penis.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.287-301
• /
• 1989

A tree of Ailanthus altissima Swingle was fastened with a plastic band, 19mm wide, around the stem 180cm above ground level and was left to grow under this condition for one year, By removal of this band the tumorous tissue gradually developed and the tree bearing distinct tumorous tissue, an overgrowth surrounding the stem, was harvested two years after the band removal. For the investigation of this tumorous part and its comparison with adjacent normal parts in the anatomical features of individual elements, the tumorous part and parts directly and 40cm above and below the tumorous part were obtained from the tree. The tumor wood having remarkably wider growth increment occurred in the 3rd growth ring the first year after removal of the fastened band, and the barrier zone which delimited the discolored wood from the normal-colored wood inwards appeared u1 the intra-2nd growth ring produced during the fastened period in the tumorous part and the false ring-like zones equivalent to barrier Zone were shown in the normal-colored 2nd growth rings of the parts directly and 40cm above and below the tumorous part, as well. The tumor wood, the 3rd growth ring, and proportion of the 2nd growth ring formed after barrier zone in the tumorous part shared common characteristics in the irregular growth ring boundary, misshapen and shorter individual fibers and vessel elements, and large ray widths and heights. The springwood pores were smaller in diameter in the tumor wood, and the larger radial and smaller tangential diameters of summerwood solitary pores and individual pores consisting of pore multiples in proportion of the 2nd growth ring formed after the barrier zone were transformed into near-isodiametric in the tumor wood, the 3rd growth ring, in the tumorous part. Only in proportion of the 2nd growth ring formed after the barrier zone were transformed into near-isodiametric in the tumor wood, the 3rd growth ring, in the tumorous part, ray densities greatly increased. And the massive tumor wood was caused not by cell size but by cell number because the radial and tangential diameters of fibers in the tumor wood, the 3rd growth ring, in the tumorous part were not sufficiently different from those in the same aged growth rings of the directly and 40cm above and below the tumorous part.

• Journal of Korean Society of Forest Science
• /
• v.80 no.1
• /
• pp.54-71
• /
• 1991

To classify and analyze the forest communities and their structures, the vegetation in Mt. Joghe was investigated from July, 1980 to August, 1989. The results obtained are as follow ; 1. A total of 750 kinds of vascular plant(49 orders, 122 families, 434 genera, 627 species, 1 subspecies, 111 varieties and 11 forma)were observed in Mt. Ioghe. The newly observed plant species were Dioscorea quingueloba, Spiranthes sinensis, Cephalanthera falcata, Angelica gigas, Clematis patents, Paeonia obovata, Hibiscus mulabilis, Ainsliaea acerifolia, Dictamnus dasycarpus, Cynachum ascyrifolia, Vaccinium koreanum, Erythrortium japonicum, Indigofera kirilowii (17species), Broussonetia kazinoki var, humillis, Euonymus, fortunei var. radicans, Juniperus communis var, nippnnica, Callicarpa japonica var. radicans, Joniperus communis var. rzipponica, Callicarpa japonica var. taquetii (4 varieties) and L indera obtusiloba for. billosum (1 forma). 2. The life spectrum of flora in Mt. Joghe was classified into $CH-D_1-R_5-e$ type. Distribution area was identical to Southern type by Nakai, Lee, and Yim. A few subtropical species were also observed. 3. Simpson's species diversity index(Ds) was 0.9 and Shannon-Weiner's diversity index (H') was 1.004. These indice suggest that the vegetation in Mt. Joghe is of complicated forest communities. 4. Pte-Q was 1.81 which was higher than the nationwide mean of 1.68. Urbanization Index (UI) was 28.75 for naturalized plant species, and 17.49 for exotic woody plant species, which were similar to those of Mt. Baekun and Mt. Naejang. 5. The forest vegetation of Mt. Joghe was grouped in 3 vegetation types : 7 natural plant Communities dominated by Quercus serrat, Quercus acutissima, Quercus variabilis, Carpinus laxiflora, Pinus derasiflora and Platycarya strobilacea, 8 substitutional plant communities Styrax japonica, Stewartia koreana, Lindera erytlrrocarpa, Zelkova serrata, Rhtrs chinensis, Controversa, and Frzrxirtus manrlshurica, and 7 plantation Communities composed of Pinus koraiensis, Pinus rigida, Magnolia nbnvata, Chamecyparis obkrsa, Larie ieptolepis, Castanea crenata and Cryptomeria japonica. 6. Actual vegetation maps and profile diagrams were made by phytosocialogical classification. 7. As the important and unique species in Mt. Joghe, Lindera sericea, Penicaria tilitorme, Hex macropoda, Hex macropoda for. pseudo-macropoda, Steroartia koreana, Adenopkora palustris and Corylop.,is coreana, which were also seported by Lee(1977), Kim and Yark(1989), were identified and Vaccinium coreanum, Cremastra appendiculinium, Juniperus comminis van. nipponica, Cephalanthera falcata, Broussortetia kazinoki var. humilis, paeonia obovata, Deutzia prunifolia, Dictamnus dasyarpus, Angelica gigics and Bupleurum falcatum were odditionally observed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1083-1093
• /
• 2007

The purpose of this study was to investigate the difference between students' beverage preference and dietitians' perception in elementary school lunch program. This study was conducted in three phases: (1) questionnaire development and survey administration to elementary school students (2) survey administration to dietitians who were in charge of the elementary school food service, and (3) comparison of beverage preferences between elementary school students and dietitians. In phase I, 703 elementary school students in Seoul were surveyed from July 11 to July 19. In Phase II, 100 school food service dietitians in Seoul participated by mail survey from September 15 to October 30, 2006. Based on the results, elementary school students tended to show a neutral milk preference (mean=3.04), whereas dietitians perceived that elementary school students had lower milk preference (mean=2.67). Also dietitians perceived higher yogurt preference (mean=4.27) than the real elementary school students' preference (mean=4.02). T-test results showed the gender difference on milk and yogurt preference. Male students had higher milk preference (t=4.912, p<0.001) and yogurt preference (t=3.621, p<0.001) than female students. Elementary school students showed high fruit juice preference (mean=4.34); however, dietitians perceived lower fruit juice preference of students (mean=3.92). There was no gender difference on fruit juice preference. Though elementary school students had higher fruit juice preference, the frequency of fruit juice served in school lunch was quite low. Over half of the dietitians reported that they served fruit juice less than once a semester. The results of this study indicated the existence of distinctive difference between students' fruit juice preference and school lunch menu offerings.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1244-1255
• /
• 2011

The purpose of this study was to compare the perception of meals and nutrition knowledge among high school students in Seoul. A survey was carried out on 548 male/female students in general and vocational high schools. The general high school students showed higher frequency of breakfast than the vocational high school students (p<0.001). As for the reasons for eating alone, the general high school students showed high frequency of 'busy', whereas the vocational high school students revealed high frequency of 'irregular meal times' (p<0.001). Concerning the habit of eating alone, 'irregular meal times (25.0%)', 'unbalanced diet (22.4%)', and 'instant food (16.6%)' were observed in that order (p<0.01). The percentage of high school students who regarded family meals as meals eaten with every member of their family was 70.6% (p<0.05). The percentage of general high school students who ate family meals was 61.8% and that of vocational high school students was 50.0% (p<0.01). When agreement with attitudes, environment, and participation in family meals was evaluated using a Likert scale (strongly agree 5 points, strongly disagree 1 point), the general high school students showed a higher level of agreement than the vocational high school students, and the results showed a significantly higher level of agreement as the frequency of family meals increased. Likewise, the groups who scored a higher level of nutrition knowledge had positive attitudes, environment, and participation in family meals with significant differences.

• Sijohaknonchong
• /
• v.23
• /
• pp.161-188
• /
• 2005

The purpose of this study was to delve into the morphological types of Sijo in an effort to determine the morphological structure of Sasul-sijo, and it's also attempted to present standard about how to discriminate Pyong-si, Eos-sijo and Sasul-sijo from one another from a morphological standpoint. It's suggested that Si with tee Jangs, six verses and 12 stanzas or more, with three Jangs, seven verses and 14 stanzas or more, and with three Jangs, eight verses and 16 stanzas or more should respectively be called Pyong-sijo, Eos-sijo and Sasul-sijo. After what Sijo was and what's not were discussed, how to distinguish Eos-sijo from Sasul-sijo was described, and finally, the structure of Sasul-sijo was presented. As for Sijo and non-Sijo, the types of works that consisted of tee Jangs, like Sijo, yet didn't suit its framework and Yuljo and were written in Chinese characters were regarded as non-Sijo. Concerning discrimination between Eos-si and Sasul-sijo, the type of Sijo that included one more or higher number of verse(s) and two more or higher number of stanzas in one of three Jangs was defined as Eos-sijo, and the type of Sijo that involved two more or higher number of verses and four more or higher number of stanzas in one of three Jangs was called Sasul-sijo. In other words, Eos-sijo contained one more verse in one of tee Jangs, and Sasul-sijo included one more Jang in one tee Jangs. The sort of Sijo that contained one more Jang in one of three Jangs could be viewed as Sasul-sijo. Regarding the structure of Sasul-si, there should be three Jangs, eight verses and 16 stanzas in one piece of Sasul-sijo. Any type of Sijo that contained two more or higher number of verses and four more or higher number of stanzas could be called Sasul-sijo. Such an addition of verse and stanza could done in various ways. The examples were (1) adding stanzas the first Jang, 2) adding stanzas to the second Jang, (3) adding stanzas to the final Jang, (4) adding stanzas to both the first and Second Jangs, (5) adding stanzas to th the second and final Jangs, and (6) adding stanzas to all the first, second and third Jangs at the same time. Besides, there was an extremely broad gap between the numbers of verse and stanza in Sasul-sijo, which ranged from a low of eight stanzas to a high of 87 ones in one of three Jangs.

• Journal of agricultural medicine and community health
• /
• v.23 no.2
• /
• pp.157-174
• /
• 1998

A survey was conducted to study the influence of socia-demographic factors on health-related behaviors. from June 1 to July 31, 1996. The study population was 1,903 adults in Kyongju City. A questionnaire method was used to collect data. Health-related behaviors included 24 items for men and 26 items for women. The followings are summaries of findings : The compliance of health promotion activities was higher when the age was older in men, when married, when having no religion and when the education level was higher than the other groups. And it was significantly higher when the income was lower in men and higher in women, in the residents living in apartment, in white collar workers, in the chronic ill people and when the body weight was lower than the other groups. Notable differences were found in the composition of health behavior factors for socio-demographic characteristics. Men used more tobacco, coffee and tea, salt and alcohol than women. However, the practice rates of regular exercise and physical examination were higher in men than women. On the other hand, the practice rates of fruit/vegetable intake, milk drinking and regular tooth brushing were higher in women than men. When the age was old, the amount of fruit/vegetable intake, the frequency of physician visit and health check-up, and regularity of meal were increased. When the income was high, the use rate of seat-belts, the amount of coffee, milk, fruit/vegetable and red meat intake were increased. The frequency of regular exercise. tooth brushing, health check-up, pap test and breast self examination were higher in the rich than the poor. When the education level was high, the frequency of regular exercise and tooth brushing, and the use rate of seat belts were increased, and the amount of alcohol consumption and salt intake were decreased. These findings suggest that socio-demographic factors are significantly associated with the patterns of health behaviors. In conclusion public health programs and individual counseling efforts should be multifaceted and behavior-specific to encourage to practice healthy life-style.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.4
• /
• pp.267-283
• /
• 2003

This study reviewed the prisoners' dietary lift status under the world panics and Japanese food shortage based on the data of the 1920~1930's prisons' main dish supplies in Chosun, Shinchu boys' prison in Taiwan, Franue correction center in France and Moabit detention house in Germany. 1. The status of main dish food supply of Chosun prisons in 1920~1930's was as follows: 1) Meals were provided with 12 rates depending on the working activities. There were big differences in energy supply between 1$^{st}$ rate of 6045.0 ㎉ in the Mockpo prison and 12$^{th}$ rate of 1855.8 ㎉ in the Masan prison in accordance with the grain supply ratio and the diet rates. 2) The average ratio of energy provided with protein, fat and carbohydrate(PFC ratio) was 20.0: 20.2: 59.8. The supplies of protein and fat were relatively high because main dish was mostly composed of soybean. The soybean was used in 20 ~60％ of main dish in prisons except Gaesung. 3) It was estimated that PFC ratio(8.3: 8.1 : 83.6) in Gaesung boys' prison was not appropriate for growing boys because the soybean supply was low. 2. The overall comparison of nutrition supply of prisons in Chosun, Taiwan, France and Germany was as follows: 1) The daily supplies of energy in Keongsung prison was 3966.5 ㎉, of which the PFC ratio was 18.9: 16.6: 64.5. This showed that the PFC ratio seemed to be balanced, even though the total amount of energy is too high and the ratios of protein and fat were somewhat high and somewhat low, respectively. 2) The main dish of the Taiwan boys' prison was provided with 6 rates and the side dish in the from of weekly cycle menu. The energy intakes from 1$^{st}$ rate of 2862.9 ㎉ to 6$^{th}$ rate of 1388.9 ㎉ were not quite enough for growing boys. It was estimated that the amounts of protein and fat taken were small but the quality was not that bad because animal protein such as protein small fish and fried tofu were supplied. 3) In the French Frenue correction center and the German Moabit detention house, the daily total amounts of energy were 2771.3 ㎉ and 2678.7 ㎉, respectively, which was estimated as appropriate compared with standard energy amount of 3000 ㎉ at that time and the current energy RDA of 2500 ㎉ for adult. The ratio of PFC was 16.2: 12.0: 71.8 in Frenue correction center and 12.4: 14.3: 73.3 in Moabit detention house, which showed that the amount of fat was slightly lacked. From this study, it was suggested that the prisons in Chosun and Taiwan under the Japanese rule and European prisons after the world panic were making an efforts to supply prisoners the appropriate amount of energy. The only question remains is that this data may be from only the food supply plan not from the data the prisoners took in real.eal.

• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.437-448
• /
• 2000

The Middle Carboniferous Gabsan Formation is distributed in the Cheongrim area of southern Yeongwol and the Mt. Gachang area of Chungbuk Province. This study was carried out to investigate the lithological characters and geochemical composition of the limestones and to find out controlling structures of the limestones of the formation. The limestones of the Gabsan Formation are characterized by the light gray to light brown in color and fine and dense textures. The limestone grains are composed of crinoid fragments, small foraminfers, fusulinids, gastropods, ostracods, etc. Due to the recrystallization, some limestones consist of fine crystalline calcites. The chemical analysis of limestones of the formation was conducted to find out the contents of CaO, MgO, Al$_2$O$_3$, Fe$_2$O$_3$ and SiO$_2$. The content of CaO ranges from 49.78-60.63% and the content of MgO ranges from 0.74 to 4.63% The contents of Al$_2$O$_3$ and Fe$_2$O$_3$ are 0.02-0.55% and 0.02${\sim}$0.84% , respectively. The content of SiO$_2$ varies from 1.55 to 4.80%, but some samples contain more than 6.0%. The limestones of the formation can be grouped into two according to the CaO content: One is a group of which CaO content ranges from 49.78 to 56.26% and the other is a group of which CaO content varies from 59.36 to 60.38%. In the first group, the contents of Al$_2$O$_3$, Fe$_2$O$_3$ and SiO$_2$ range very irregularly according to the CaO content. In the second group, the values of MgO, Al$_2$O$_3$, Fe$_2$O$_3$ and SiO$_2$ are nearly same. Detailed structural analysis of mesoscopic structures and microstructures indicates the five phase of deformation in the study area. The first phase of deformation(D$_1$) is characterized by regional scale isoclinal folds, and bedding parallel S$_1$ axial plane foliation which is locally developed in the mudstone and sandstone. Based on the observations of microstructures, S$_1$ foliations appear to be developed by grain preferred orientation accompanying pressure-solution. During second phase of deformation, outcrop scale E-W trending folds with associated foliations and lineations are developed. Microstructural observations indicate that crenulation foliations were formed by pressure-solution, grain boundary sliding and grain rotation. NNW and SSE trending outcrop scale folds, axial plane foliations, crenulation foliations, crenulation lineations, intersection lineations are developed during the third phase of deformation. On the microscale F$_3$ fold, axial plane foliations which are formed by pressure solution are well developed. Fourth phase of deformation is characterized by map scale NNW trending folds. The pre-existing planar and linear structures are reoriented by F$_4$ folds. Fifth phase of deformation developed joints and faults. The distribution pattern of the limestones is mostly controlled by F$_1$ and F$_4$ folds.