• Korea Science and Art Forum
• /
• v.25
• /
• pp.103-118
• /
• 2016

Due to the rapid development of ICT, corporate business models quickly changed and because of the radical growth of IT technology, sequential or gradual survival has become difficult. Internet-based new businesses such as IT service companies are seeking for new convergence business models that have not existed before to create business models that are more competitive, but the economic efficiency of business models that were successful in the past is wearing off. Yet, as reaching the critical point where the platform value becomes extremely high for platforms via the Internet is happening at a much higher speed than before, platform-ization has become a very important condition for rapid business expansion for all kinds of businesses. This study analyzes the necessity of establishing platform business models in IT service planning and identifies their characteristics through case analyses of platform business models. The results derived features First, there is a need to ensure sufficient buyers and sellers, and second, platform business model should provide customers with distinctive value of the only platforms are generating. third, the common interests between platform-driven company and a partner, participants Should be existing. Fourthly, by expanding base of participants and upgrades, expansion of adjacent areas we must have a continuous scalability and evolution must be sustainable. While it is expected that the identified characteristics will cause tremendous impacts to the establishment of platform business models and to the graphing of service planning, we also look forward to this study serving as the starting point for the establishment of theories of profit models for platform businesses, which were not mentioned in the study, so that planners responsible for platform-based IT service planning will spend less time and draw bigger schemes in building planning drafts.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.91-98
• /
• 2016

This aim of the present study was to evaluate the effects of phosphate on the quality properties of the surimi-like materials. Surimi-like materials as a control was prepared with beef heart by three times of washing treatment. Three types of surimi-like materials were manufactured by different conditions(T1: 2% salt, T2: 1.95% salt+0.05% phosphate, T3: 1.90% salt+0.10% phosphate). The moisture content was significantly lower in T1 than the control, and T3 sample had the highest crude protein content(P<0.05). The cooking loss was significantly lower in T2 than the control, and T2 sample had the highest water-holding capacity(P<0.05). The lightness and whiteness values were significantly lower in the treatment samples compared to the control sample; whereas redness values was higher than the control(P<0.05). Beef heart surimi-like materials added with salt and phosphate had higher in texture properties in the control, and T3 sample had the highest hardness, cohesiveness, gumminess and chewiness values(P<0.05). Therefore, the addition of phosphate could increase the protein content and gel properties as well as water-holding capacity of surimi-like materials from beef heart.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.147-155
• /
• 2016

This study presented a measure for turning by-products, released from land farming sites, into resources. The measure involved adding food by-products such as rice bran and nonfat soybean to the sludge, released from the eel farming sites, inoculating the lactic acid bacteria, Aspergillus oryzae, and Bacillus subtilis by step, fermenting them, and measuring the changed ingredients of the fermented fodder. The water content of the fermented fodder by the step of preparation was the first-step fermented product (14.6%) using the lactic acid bacteria, and the second and third-stage fermented product (33.0% and 34.0% respectively) using Aspergillus oryzae and Bacillus subtilis. The pH level was found to be 5.38 in the first-step fermented product due to the secretion of lactic acid caused by the lactic acid bacteria, and the pH level of the second and third-stage fermented products was 5.66 and 7.26, respectively, showing that the pH level increased. The phytic acid content was 0.126g/100g in the first-step fermented product, 0.004g/100g in the second-stage fermented product, and 0.093g/100g in the third-stage fermented product. The measurement of nitrogen content revealed that the amino nitrogen content was high with 1226.37mg% in the second-stage fermented product, and a little lower with 710.18mg% in the third-stage fermented product. The ammonium nitrogen content increased from 0.988mg/kg in the first-stage fermented product to 1.502mg/kg in the third-stage fermented product. Total nitrogen content increased to 2.78% in the first-stage fermented product, 4.08% in the second-stage fermented product, and 4.85% in the third-stage fermented product. As fermentation continued with the three microbes, the phytic acid decreased, and the protein decomposition rate increased. Also, due to the 3 step fermentation, the low-molecule nitrogen ingredient content increased, suggesting that the fodder was developed to offer high digestion and absorption.

• Korea Science and Art Forum
• /
• v.29
• /
• pp.319-331
• /
• 2017

South Korea has entered the age of aging society since the elderly population over 65 reached 13.1% in 2015. This increase rate is the fastest in the OECD members. as a part of the precaution, the Korean government has enforced the long term care insurance from July 2008 and the increase of related nursing homes until 2015 was 220.2% which is rapid and quantitative. It was natural that quantitative expansion leads to qualitative improvement. With regard to service environment conditions, color environment draws attention as one of the most effective measures. color environment supports nursing home's spatial functions and the aged class is subject to the research as the potential customers. This study aims to understand color environment, conduct surveys for color preference and attitude toward color environment, and suggest directions for color environment plan. The ultimate goal is to improve the quality of Korean nursing home environment. It studied definition, state, color environment and space functions of nursing homes as well as the preceding researches. With 100 people over 60s in Busan and Gyeongnam area (52 male and 48 female), the survey examined attitudes for color environment and color preference by space functions in nursing home. The research method is as follows. First, as a result of the consciousness survey on color environment in elderly nursing home, it considers service (37%), medical service (20%), and location (19%) heavily in order. color environment plan is not recognized significantly. However, the need of indoor color plan in the elderly nursing homes has "agree (32%) and "strongly agree (25%), which suggests that color introduction is required to the nursing homes. Second, the indoor coloration for the elderly nursing homes has various color preferences. The color preference order for bedroom was R, P, and G but this order changes in nursing space (program room) to G, R, and Y. The communal space such as lobby prefers R, G and Y in order. R color was preferred in general.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.107-123
• /
• 2018

The global impact of climate change on agriculture is now increasing. The purpose of this study was to investigate the effect of climate change on livestock productivity. The variables that have the greatest influence on climate change factors were examined through previous studies and expert surveys. We also used the actual productivity data of livestock farmers to investigate the relationship with climate change. In order to evaluate the climate for changes in livestock productivity, national representative data (such as bullocks, dairy, pigs, laying hens, and broilers) were surveyed in Korea. Also, to select and classify evaluation indexes, we selected climate change factor variables as prior studies and studied the weighting factor of climate variable factors. In this study, the researchers of industry, academia, and farmers in the livestock sector conducted questionnaires on the indicators of vulnerability to climate change using experts, and then weighed the selected indicators using the hierarchical analysis process (AHP). In order to verify the validity of the evaluation index, was examined using domestic climate data (temperature, precipitation, humidity, etc.). Correlation and regression analysis were performed. The empirical relationship between climate change and livestock productivity was examined through this study. As a result, we used data with high reliability of statistical analysis and found that there are significant variables.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.42-49
• /
• 2023

The glass ceramic secondary resource containing Li-Al-Si is used in inductor, fireproof glass, and transparent cookware and accounts for 14% of the total consumption of Li, which is the second most widely used after Li-ion batteries. Therefore, new Li resources should be explored when the demand for Li is exploding, and extensive research on Li recovery is needed. Herein, we recovered Li from fireproof Li-Al-Si glass ceramic, which is a new secondary resource containing Li. The fireproof glass among all Li-Al-Si glass ceramics was used as raw material that contained 1.5% Li, 9.4% Al, and 28.9% Si. The process for recovering Li from the fireproof glass was divided into two parts: (1) calcium salt roasting and (2) water leaching. In calcium salt roasting, a sample of fireproof glass was crushed and ground below 325 mesh. The leaching efficiency was compared based on the presence or absence of heat treatment of the fireproof glass. Moreover, the leaching rates based on the input ratios of calcium salt, Li-Al-Si glass, and ceramics and the leaching process based on calcium salt roasting temperatures were compared. In water leaching, the leaching and recovery rates of Li based on different temperatures, times, solid-liquid ratios, and number of continuous leaching stages were compared. The results revealed that fireproof glass ceramics containing Li-Al-Si should be heat treated to change phase to beta-type spodumene. CaCO₃ salt should be added at a ratio of 6:1 with glass ceramics containing Li-Al-Si, and then leached 4 times or more to achieve a recovery efficiency of Li over 98% from a solution containing 200 mg/L of Li.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.433-440
• /
• 2023

High dose rate brachytherapy is a cancer treatment that intensively irradiates radiation to tumors by inserting isotopes with high dose rates into the body. For such a treatment, it is necessary to deliver an accurate dose to the tumor tissue through an accurate treatment plan while delivering only a minimum dose to the normal tissue. Therefore, it is very important to check the location accuracy of the source through accurate Quality Assurance (QA) in clinical practice. However, since the source position is determined using a ruler, automatic radiographer, video monitor, etc. in clinical practice, it yields inaccurate results. In this study, a semiconductor dosimeter using CsPbI₂Br and CsPbIBr₂ was fabricated. And, in order to analyze whether it is more suitable for the relative QA dosimeter for brachytherapy device among the two materials, the radiation detection ability of each was compared and evaluated. In order to evaluate the radiation detection ability in brachytherapy, the reproducibility and linearity of the two materials were evaluated in ¹⁹²IR. In the reproducibility evaluation, CsPbI₂Br presented a Relative Standard Deviatio(RSD) of 0.98% and CsPbIBr₂ presented an RSD of 3.45%. In the linearity evaluation, the coefficient of determination (R²) of CsPbI₂Br was presented as 0.9998, and the R² of CsPbIBr₂ was presented as 0.9994. As a result of the evaluation, it was found that CsPbI₂Br was more stable in radiation detection while satisfying the evaluation criteria in the dosimeter manufactured in this experiment. Therefore, CsPbI₂Br material is suitable for application as a relative dosimeter for radiation detection in brachytherapy devices.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.297-303
• /
• 2023

Pediatric Computed Tomography (CT) examinations can often result in exam failures or the need for frequent retests due to the difficulty of cooperation from young patients. Deep Learning Image Reconstruction (DLIR) methods offer the potential to obtain diagnostically valuable images while reducing the retest rate in CT examinations of pediatric patients with high radiation sensitivity. In this study, we investigated the possibility of applying DLIR to reduce artifacts caused by respiration or motion and obtain clinically useful images in pediatric chest CT examinations. Retrospective analysis was conducted on chest CT examination data of 43 children under the age of 7 from P Hospital in Gyeongsangnam-do. The images reconstructed using Filtered Back Projection (FBP), Adaptive Statistical Iterative Reconstruction (ASIR-50), and the deep learning algorithm TrueFidelity-Middle (TF-M) were compared. Regions of interest (ROI) were drawn on the right ascending aorta (AA) and back muscle (BM) in contrast-enhanced chest images, and noise (standard deviation, SD) was measured using Hounsfield units (HU) in each image. Statistical analysis was performed using SPSS (ver. 22.0), analyzing the mean values of the three measurements with one-way analysis of variance (ANOVA). The results showed that the SD values for AA were FBP=25.65±3.75, ASIR-50=19.08±3.93, and TF-M=17.05±4.45 (F=66.72, p=0.00), while the SD values for BM were FBP=26.64±3.81, ASIR-50=19.19±3.37, and TF-M=19.87±4.25 (F=49.54, p=0.00). Post-hoc tests revealed significant differences among the three groups. DLIR using TF-M demonstrated significantly lower noise values compared to conventional reconstruction methods. Therefore, the application of the deep learning algorithm TrueFidelity-Middle (TF-M) is expected to be clinically valuable in pediatric chest CT examinations by reducing the degradation of image quality caused by respiration or motion.

• Clean Technology
• /
• v.29 no.2
• /
• pp.126-134
• /
• 2023

Direct catalytic decomposition is a promising method for controlling the emission of nitrous oxide (N₂O) from the semiconductor and display industries. In this study, a γ-Al₂O₃ catalyst was developed to reduce N₂O emissions by a catalytic decomposition reaction. The γ-Al₂O₃ catalyst was prepared by an extrusion method using boehmite powder, and a N₂O decomposition test was performed using a catalyst reactor that was approximately 25.4 mm (1 in) in diameter packed with approximately 5 mm of catalysts. The N₂O decomposition tests were carried out with approximately 1% N₂O at 550 to 750 ℃, an ambient pressure, and a GHSV=1800-2000 h^-1. To confirm the N₂O decomposition properties and the effect of O₂ and steam on the N₂O decomposition, nitrogen, air, and air and steam were used as atmospheric gases. The catalytic decomposition tests showed that the 1% N₂O had almost completely disappeared at 700 ℃ in an N₂ atmosphere. However, air and steam decreased the conversion rate drastically. The long term stability test carried out under an N₂ atmosphere at 700 ℃ for 350 h showed that the N₂O conversion rate remained very stable, confirming no catalytic activity changes. From the results of the N₂O decomposition tests and long-term stability test, it is expected that the prepared γ-Al₂O₃ catalyst can be used to reduce N₂O emissions from several industries including the semiconductor, display, and nitric acid manufacturing industry.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.343-363
• /
• 2023

Sulawesi island, as a global producer of nickel resources, is leading the rapid growth of nickel industry of Indonesia. Nickel laterite deposits in Sulawesi was formed by lateritization of the world-scale East Sulawesi Ophiolite (ESO) under the active tectonic setting and tropical rainforest climate. In this paper, exploration cases for nickel laterite deposits in five regions of Sulawesi are reported. Regional characteristics on nickel laterite deposits in Sulawesi are understood based on various exploration activities such as outcrop, trench and pit survey, petrological observation, geochemical analysis, and interpretation of drilling data, etc.. In the northeastern part of 'Southeast-Arm', which is a strategic location for nickel industry of Indonesia, ESO is extensively exposed to the surface. In the Morombo and Morowali regions, typical high-grade saprolite-type orebodies with a thickness of 10 to 20 m occur. The cases showed that topographic relief tends to regulate Ni-grade distribution and orebody thickness, and that high grade intervals tend to occur in places where joints and garnierite veins are dense. In the Tinanggea and South Palangga regions in the southern part of the Southeast-Arm, overburden composed of Neogene to Quaternary deposits is a major factor affecting the preservation and profitability of nickel laterite deposits. Despite the overburden, high-grade saprolite-type orebodies composed of Ni-bearing serpentine with garnierite veins occur in a thickness of around 10 m to secure economic feasibility. In contrast, in the Ampana region in the northern part of 'East-Arm', low-grade nickel laterite deposits with immature laterite profile was identified, which is thought to be the result of active denudation due to tectonic uplift. Exploration cases in this paper will help to understand characteristics and controlling factors on nickel laterite deposits in Sulawesi, Indonesia.