• 제목/요약/키워드: γ

검색결과 3,260건 처리시간 0.033초

졸-겔법에 의한 (YbxY1-x)MnO3강유전체 박막제조 (Preparation of Ferroelectric (YbxY1-x)MnO3 Thin Film by Sol-Gel Method)

  • 강승구;이기호
    • 한국세라믹학회지
    • /
    • 제41권2호
    • /
    • pp.170-175
    • /
    • 2004
  • Y-acetate, Yb-acetate와 Mn-acetate를 출발물질로 사용하여 sol-gel 법으로 강유전성 (Y $b_{x}$ $Y_{1-x}$)Mn $O_3$ 박막을 제조하였다. Acetylaceton을 촉매로 사용하고 Reflux 법을 이용하여 안정한 (Y $b_{x}$ $Y_{1-x}$)Mn $O_3$ 전구체 용액을 얻었으며, 박막은 스핀 코팅방법으로 Si(100) 기판 위에 제조하였다 열처리 온도, 코팅용액의 Rw($H_2O$/alkoxide moi ratio)변화 등을 실험변수로 하여 박막의 결정상 변화를 연구하였다. X-선 회절분석 결과 YbMn $O_3$의 결정상을 얻기 위한 최저 열처리온도는 7$50^{\circ}C$이었으며, 최적 열처리 조건은 80$0^{\circ}C$였다 Rw를 1∼6 범위 내에서 조절하여 첨가한 결과, Rw=1의 조건에서 c-축 배향이 잘 발달된 hexagonal YbMn $O_3$ 단일 결정상을 얻었다. Si(100)기판 위에 제조된 (Y $b_{x}$ $Y_{1-x}$)Mn $O_3$ 박막은 x=0 또는 1인 경우 잔류분극(Pr)값이 약 200 nC/$ extrm{cm}^2$을 나타내었으나 0

PROPERTIES OF INDUCED INVERSE POLYNOMIAL MODULES OVER A SUBMONOID

  • Cho, Eunha;Jeong, Jinsun
    • Korean Journal of Mathematics
    • /
    • 제20권3호
    • /
    • pp.307-314
    • /
    • 2012
  • Let M be a left R-module and R be a ring with unity, and $S=\{0,2,3,4,{\ldots}\}$ be a submonoid. Then $M[x^{-s}]=\{a_0+a_2x^{-2}+a_3x^{-3}+{\cdots}+a_nx^{-n}{\mid}a_i{\in}M\}$ is an $R[x^s]$-module. In this paper we show some properties of $M[x^{-s}]$ as an $R[x^s]$-module. Let $f:M{\rightarrow}N$ be an R-linear map and $\overline{M}[x^{-s}]=\{a_2x^{-2}+a_3x^{-3}+{\cdots}+a_nx^{-n}{\mid}a_i{\in}M\}$ and define $N+\overline{M}[x^{-s}]=\{b_0+a_2x^{-2}+a_3x^{-3}+{\cdots}+a_nx^{-n}{\mid}b_0{\in}N,\;a_i{\in}M}$. Then $N+\overline{M}[x^{-s}]$ is an $R[x^s]$-module. We show that given a short exact sequence $0{\rightarrow}L{\rightarrow}M{\rightarrow}N{\rightarrow}0$ of R-modules, $0{\rightarrow}L{\rightarrow}M[x^{-s}]{\rightarrow}N+\overline{M}[x^{-s}]{\rightarrow}0$ is a short exact sequence of $R[x^s]$-module. Then we show $E_1+\overline{E_0}[x^{-s}]$ is not an injective left $R[x^s]$-module, in general.

$Li_3B_7O_12$의 결정구조 (Crystal Structure of Lithium Heptaborate, $Li_3B_7O_12$)

  • 박현민;조양구
    • 한국결정학회지
    • /
    • 제9권1호
    • /
    • pp.15-20
    • /
    • 1998
  • Lithium heptaborate, Li3B7O12(Mr=288.49), 단결정을 성장시킨후, 결정구조를 X-선 분말 회절법과 단결정 회절법을 이용하여 결정하였다. 구조해석 결과 단위포 내에 각각 두개의 (B3O7)3-와 (B3O8)5-그룹이 있음을 알 수 있었다. 공간군은 P-1(Ci1)으로 결정되었고, a=6.500(3) Å, b=7.839(2) Å, c=8.512(1) Å, α=92.07(2)˚, β=104.97(2)˚, γ=99.35(3)˚, V=412.0(2) Å3, Z=2 Dx=2.32 g cm-3, MoKα, λ=0.71069 Å, μ=2.15cm-1, T=293K 이었다. 최종 구조의 오차인자는 2,296개 회절 점에서 각각 R=0.0339과 wR=0.0882이었다. X-선 분말 회절방법으로 비슷한 결과를 얻을 수 있었다.

  • PDF

Pr 첨가가 Fe-B 비정질합금의 자왜에 미치는 영향 (The Effect of Pr Additive on Magnetostriction of Amorphous Fe-B Alloy)

  • 조용수;김윤배;김창석;김택기
    • 한국자기학회지
    • /
    • 제4권2호
    • /
    • pp.126-129
    • /
    • 1994
  • 희토류원소 Pr의 첨가가 Fe-B계 비정질합금의 자왜에 미치는 영향을 조사하기 위하여 비정질 $Fe_{86-x}B_{14}Pr_{x}(2{\leq}x{\leq}8\;at.%)$ 합금을 급속응고법을 이용하여 제조하였다. 급 속응고상태 비정질 $Fe_{86-x}B_{14}Pr_{x}$ 합금의 포화자왜는 Pr이 증가할 수록 증가하여 x=8에 서 약 50 ppm이 얻어졌다. 특히 $300^{\circ}C$에서 2시간 열처리된 비정질 $Fe_{84}B_{14}Pr_{2}$ 합금의 포화자왜는 70 ppm으로 증가하였다. $300^{\circ}C$에서 2시간 열처리된 비정질 $Fe_{84}B_{14}Pr_{2}$ 합금의 교류 자기이력손실 및 교류투자율$(f=50\;kHz,\;B_{m}=0.1\;T)$은 각각 15 W/kg, $5.5{\times}10^{3}$이었다.

  • PDF

THE NUMBER OF POINTS ON ELLIPTIC CURVES E0a3:y2=x3+a3 OVER Fp MOD 24

  • You, Soon-Ho;Park, Hwa-Sin;Kim, Hyun
    • 호남수학학술지
    • /
    • 제31권3호
    • /
    • pp.437-449
    • /
    • 2009
  • In this paper, we calculate the number of points on elliptic curves $E^{a^3}_0:y^2=x^3+a^3$ over ${\mathbb{F}}_p$ mod 24 and $E^b_0:y^2=x^3+b$ over ${\mathbb{F}}_p$ mod 6, where b is cubic non-residue in ${\mathbb{F}}^*_p$. For example, if p ${\equiv}$ 1 (mod 12) is a prime, and a and a(2t - 3) are quadratic residues modulo p with $3t^2{\equiv}1$ (mod p), then the number of points in $E^{a^3}_0:y^2=x^3+a^3$ is congruent to 0 modulo 24.

비정질합금 $Fe_{80-x}Co_xB_{20}$ 자화값의 $T^{3/2}$ 온도 의존성 ($T^{3/2}$ Temperature Dependence of Magnetization of Amorphous $Fe_{80-x}Co_xB_{20}$)

  • 유병두;김종오;김경섭;유성초
    • 한국자기학회지
    • /
    • 제2권3호
    • /
    • pp.211-215
    • /
    • 1992
  • The temperature-dependent saturation magnetization curves of amorphous $Fe_{80-x}Co_xB_{20}$ (8 ${\le}$ x ${\le}$ 40, the step of x is 8) alloys were measured using a vibrating sample magnetometer from 77 K up to 1000 K. Curie temperature and the Bloch coefficient were estimated from the saturation magnetization curves. The low temperature dependence of magnetization is in good agreement with Bloch relation, $M_s(T)$=$M_s(O)$ (1-$BT^{3/2}$ - ${\cdots}.$). The spin wave stiffness constant, tne range of the exchange interaction, and the probable atomic spin were calculated from the saturation magnetization values.

  • PDF

Temperature Coefficient of Dielectric Constant in CaTiO3-A(B′, B″)O3 Microwave Dielectric Ceramics (A=Ca, La, Li, B′=Al, Fe, Mg, B″=Nb, Ta)

  • Kim, Jeong-Seog;Cheon, Chae-Il;Park, Chan-Sik;Byun, Jae-Dong
    • 한국세라믹학회지
    • /
    • 제40권10호
    • /
    • pp.925-930
    • /
    • 2003
  • The dielectric polarizability-related factors contributing to the $\tau$$_{\varepsilon}$ have been analysed in terms of dielectric permittivity $\varepsilon$, Tolerance Factor (TF), and octahedron tilt angles in (1-x)CaTi $O_3$-x[A(B', B″) $O_3$] (A=Ca, La, Li, B'=Al, Fe, Mg, B″=Nb, Ta) and (S $r_{0.2}$C $a_{0.8}$)( $Ti_{1-x}$ Z $r_{x}$) $O_3$. All the compounds have the orthorhombic Pbnm structure except the end members A(B', B″) $O_3$ and the solid solutions of x$\geq$0.8. The additional dipole field effect is suggested as a dominant factor contributing to $\tau$$_{\varepsilon}$ in CaTi $O_3$-based ceramics having relatively large $\varepsilon$, which has not been generally considered in the previous reports dealing with the $\tau$$_{\varepsilon}$. This study has been focussed on delineating the dipole field effect on the $\tau$$_{\varepsilon}$ in comparison to the octahedron tilt effect in CaTi $O_3$-based ceramics.cs..cs.

BaR0.5+xTa0.5-xO3-δ (R=희토류 금속)계 Proton 전도체 특성에 미치는 수분의 영향 (Humidity Effect on the Characteristics of the Proton Conductor Based on the BaR0.5+xTa0.5-xO3-δ (R=Rare Earth) System)

  • 최순목;서원선;정성민;김신;이홍림
    • 한국세라믹학회지
    • /
    • 제45권5호
    • /
    • pp.290-296
    • /
    • 2008
  • $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structures which have been reported as proton conductors over $600^{\circ}C$ were studied. The $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure is known to be more easily synthesized and has better stability than normal $ABO_3$ perovskite structure. And it is stable at about $800^{\circ}C$ in the $CO_2$ atmosphere, whereas the $BaCeO_3$ perovskite is easily decomposed into carbonate. In addition, this $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure could simply produce oxygen vacancies within their structure not by introducing additional doping oxides but by just controling the molar ratio of $B'^{+3}$ and $B"^{+5}$ metal ions in the B site. Hence it is easy to design the structure which shows highly sensitive electrical conductivity to humidity. In this study, the single phase boundary of $BaR_{0.5+x}Ta_{0.5-x}O_{3-{\delta}}$(R = rare earth) complex perovskite structures and it's phase stability were investigated with changes in composition, x. And the humidity dependance of electrical conductivity at different $P_{H2O}$ conditions was investigated.

적응형 레이다를 위한 다중대역 혼합기에 관한 연구 (The Study on Multi-band Mixer for Adaptive Radar)

  • 고민호;강세벽
    • 한국전자통신학회논문지
    • /
    • 제16권6호
    • /
    • pp.1053-1058
    • /
    • 2021
  • 본 논문은 능동소자에 인가되는 게이트 바이어스 전압을 가변하여 X-, K- 및 Ka-대역 신호를 선택적으로 변환할 수 있는 다중대역 혼합기를 제안하였다. 제안한 다중대역 혼합기는 LO 전력 +6 dBm으로 구동하였고 X-대역의 경우, 게이트 바이어스 전압 -0.8 V에서 변환손실 -10 dB 특성, K-대역에서 게이트 바이어스 전압 -0.3 V에서 변환손실 -9 dB 특성, Ka-대역에서는 게이트 바이어스 전압 -0.2 V에서 변환손실 -7.0 dB 특성을 나타내었다. 모든 대역에서 1-dB 압축점 (P1dB)은 +0.5 dBm 특성을 나타내었다.

STABILITY OF TWO GENERALIZED 3-DIMENSIONAL QUADRATIC FUNCTIONAL EQUATIONS

  • Jin, Sun-Sook;Lee, Yang-Hi
    • 충청수학회지
    • /
    • 제31권1호
    • /
    • pp.29-42
    • /
    • 2018
  • In this paper, we investigate the stability of two functional equations f(ax+by + cz) - abf(x + y) - bcf(y + z) - acf(x + z) + bcf(y) - a(a - b - c)f(x) - b(b - a)f(-y) - c(c - a - b)f(z) = 0, f(ax+by + cz) + abf(x - y) + bcf(y - z) + acf(x - z) - a(a + b + c)f(x) - b(a + b + c)f(y) - c(a + b + c)f(z) = 0 by applying the direct method in the sense of Hyers and Ulam.