• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.64-65
• /
• 1996

• KSBB Journal
• /
• v.28 no.1
• /
• pp.60-64
• /
• 2013

Two strains were isolated from the traditional Deep Blue Sediment Dye of Polygoum tinctoria, Niram, and temporarily named Niram A and Niram B, respectively. The phylogenetic analysis revealed that strain Niram A and B were closely related to the members of the genus Comamonas and Microbacterium, respectively. Strain Niram A exhibited the highest 16S rRNA gene sequence similarity to C. aquatica LMG $2370^T$ (98.06%). Strain Niram B showed 100% homology with M. oxydans DSM 20578T and M. maritypicum DSM $12512^T$. The growth of the strain Niram A and B was not inhibited in Niram medium containing high calcium concentration without free sugar as carbon source. The reducing Niram is greenish. Therefore, the reducing ability on the Niram of the strains Niram A and B were determined with the color difference of the $a^*$ values of Niram fermented-fluids. The $a^*$ value indicates the level of redness (positive value) or greenness (negative value). The green color is increasing towards the negative value. In all samples fermented for 10 days, the $a^*$ values among samples were no significant difference. However, samples fermented for 15 days have an appreciable change. After fermentation for 15 days, the control Niram sample had $-3.96{\pm}0.02$ of the $a^*$ value. On the other hand, the Niram samples fermented with the strain Niram A and B showed $-4.20{\pm}0.02$ of the $a^*$ value and $-7.86{\pm}0.03$ of the $a^*$ value, respectively. In the reducing ability on the Niram, the strain Niram B was significantly better than the strain Niram A.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.344-352
• /
• 1993

The purpose of this study is to investigate the possibility of the non-destructive quality evaluation for food by the acoustic non-linear parameter B/A which is a measure of the non-linearity of the state equation of the medium in terms of pressure and density. The B/A of water, corn oil O/W(oil in water) emulsion and milk were measured by using a sound velocity measuring system. The B/A value of water was measured for ascertaining reliability of our experimental system. Corn oil W/W emulsion was prepared as a model of milk . It was proved that the B/A value of O/W emulsion was related to the oil concentration by a law of mixture. We applied this result to milk and obtained satisfactory results for predicting the milk fat concentration.

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.2
• /
• pp.173-180
• /
• 1998

This study was conducted to examine the sensory quality, the degree of gelatization, pH, color, texture and moisture content of paeksolgi with omija water extracts added. The results of the analysis were as follows : The moisture contents of Paeksolgi were about 36~39%. The L value of the control group was 83.04 The degree of the colour was (L value: 71.82~86.56), (a value: -1.33~+0.78), (b value : 7.84~9.78). As the amount of omija water extracts was increased. the L and a values increased, but the b value showed a similar value, It was found that the yellowness decreases by increasing the soaking time of each type. The gelatinization of Paeksolgi with omija water extracts added was decreased as the amount of omija was increased. The sensory quality of paeksolgi with 5~7% omija water extracts added showed the most favorable sensory evaluation. In view of color, after taste and overall quality, the D$_2$group of Paeksolgi was preferable to the other paeksolgi groups with omija water extracts added.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.6
• /
• pp.1495-1506
• /
• 2021

The growth of solutions of second order complex differential equations f" + A(z)f' + B(z)f = 0 with transcendental entire coefficients is considered. Assuming that A(z) has a finite deficient value and that B(z) has either Fabry gaps or a multiply connected Fatou component, it follows that all solutions are of infinite order of growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.64-69
• /
• 1999

Gelatinization characteristics of 111 glutinous rice varieties were evaluated by Rapid Visco Analyzer. Gelatinization viscosity of glutinous rice tested varied with ecotypes or varietal groups: indica, japonica, and Tongil type. Indica rice showed the highest average value of initial pasting temperature. The average values for peak, hot, and cool viscosities were highest in Tongil-type rice, and lowest in japonica rice. Japonica showed the lowest breakdown and consistency, but the highest setback value. Indica was lower in alkali digestion value (ADV), and shorter in gel length after gelatinization thanjaponica and Tongil-type. Glutinous rices tested could be divided into six groups by cluster analysis based on their gelatinization characteristics. Group I-A was mostly early maturing japonica varieties while I-B was mostly indica and Tongil-type rices. Groups II-A and II-B were consisted of very early maturingjaponica, and III-A and III-B included medium or medium late maturingjaponica varieties. Group III-A showed the lowest average values of peak, hot, cool, and consistency viscosities, and also in breakdown and setback ratios. Group I-B revealed the highest values in peak, hot, cool, breakdown, and consistency viscosities. ADV was low in groups I-A, I-B, and II-B, and gel consistency was not different among the six varietal groups. Principal component analysis using seven traits related with gelatinization produced four effective components, and the first and second components were highly correlated with all the gelatinization characters evaluated.

• Journal of the Korean Society of Radiology
• /
• v.83 no.6
• /
• pp.1312-1326
• /
• 2022

Purpose To investigate the added value of right down decubitus (RDD) CT when determining adjacent organ invasion in cases of advanced gastric cancer (AGC). Materials and Methods A total of 728 patients with pathologically confirmed T4a (pT4a), surgically confirmed T4b (sT4b), or pathologically confirmed T4b (pT4b) AGCs who underwent dedicated stomach-protocol CT, including imaging of the left posterior oblique (LPO) and RDD positions, were included in this study. Two radiologists scored the T stage of AGCs using a 5-point scale on LPO CT with and without RDD CT at 2-week intervals and recorded the presence of "sliding sign" in the tumors and adjacent organs and compared its incidence of appearance. Results A total of 564 patients (77.4%) were diagnosed with pT4a, whereas 65 (8.9%) and 99 (13.6%) patients were diagnosed with pT4b and sT4b, respectively. When RDD CT was performed additionally, both reviewers deemed that the area under the curve (AUC) for differentiating T4b from T4a increased (p < 0.001). According to both reviewers, the AUC for differentiating T4b with pancreatic invasion from T4a increased in the subgroup analysis (p < 0.050). Interobserver agreement improved from fair to moderate (weighted kappa value, 0.296-0.444). Conclusion RDD CT provides additional value compared to LPO CT images alone for determining adjacent organ invasion in patients with AGC due to their increased AUC values and improved interobserver agreement.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.71-83
• /
• 2007

Liquefaction resistance depends strongly upon the degree of saturation, which is expressed in terms of the pore pressure coefficient, B. The B-value has been widely used to quantify the state of saturation of laboratory samples. However, it is practically impossible to determine in situ state of saturation by using the B-value. So, P-wave velocity can be alternatively used as a convenient index for evaluating the in situ state of saturation. In this paper, the Stokoe type torsional shear (TS) testing system was modified to saturate the specimen, with which it is also possible to measure P ($V_p$), S-wave velocity ($V_s$) and the excess pore water pressure buildup In order to examine the effect of B-value for nearly saturated sands. A series of the tests were carried out at 3 relative densities (40%, 50% and 75%) and various B-values using Toyoura sand. Based on the test results, the variations of $V_p\;and\;V_s$ with B-value were analyzed and compared with a existing theoretically derived formula. The normalized pore water pressure, $du/{\sigma}{_0}'$ and cyclic threshold shear strain, ${\gamma}^c_{th}$ with B-value were also analyzed. Additionally the test results related to pore water pressure were analyzed by $V_p$ to apply to the field seismic analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.6
• /
• pp.756-766
• /
• 1999

This study was performed to evaluate effect on color and opacity of 3 different copy-milled In-Ceram cores by glass infiltration and porcelain veneering. Color was evaluated by the $CIEL^*a^*b^*$ readings were recorded with a Colorimeter, Color difference value(${\Delta}E^*_{ab}$) was calculated and opacity was represented by the contrast ratio. The variance of each color parameter ($L^*,\;a^*,\;b^*$), color difference value, and opacity change after glass-infiltrated and after veneered with porcelain was compared. Three experimental groups were fabricated as follows. Group 1 (Alumina core) 15 Alumina blanks was infiltrated with originally marketed glass (A1) and veneered with porcelain(A1) Group 2 (modified Alumina core) : 15 Alumina blanks was infiltrated with its associated glass(S11) and veneered with porcelain(A1) Group 3 (Spinell core) : 15 Spinell blanks was infiltrated with originally developed glass(S11) and veneered with porcelain(A1). The results were as follows: 1. After glass infiltration, $L^*$ value showed decrease, $a^*$ value showed decrease only group 1(p<0.001) and $b^*$ value showed increase on group 1, increase on group 2, 3(p<0.001). 2. After porcelain veneering, $L^*$ value showed decrease(p<0.001), $a^*$ value showed increase on group 1, decrease on group 2(p<0.05) and $b^*$ value showed decrease on group 1, increase on group 2, 3 (p<0.001). 3. ${\Delta}E^*_{ab}$ between before and after glass infiltration was more than 13.77, and between after glass infiltration and after porcelain veneering more than 19.63. 4. After glass infiltration and porcelain veneering, Alumina showed the lowest $L^*,\;a^*$ value and highest $b^*$ value among 3 different groups (p<0.05). ${\Delta}E^*_{ab}$ between group 1-2, 1-3 was higher than that of group 2-3. 5. After glass infiltration, opacity showed decrease, Group 1 had the highest opacity(p<0.05), but no significant differences between group 2 and 3. Above results suggest that glass infiltration and porcelain veneering effects on color and opacity of In-Ceram core, and that modified In-Ceram Alumina uses single crowns or bridges like In-Ceram Spinell.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.11-16
• /
• 2006

It appraises that use an indoor noise standard, a NC value which is a noise appraisal, a dB(A) value, a N value in foreign country because it doesn't yet ready an appraisal standard in domestic. Also, It appraises that the supply and drainage noise which could change water supply pressure, $4kg/cm^2,\;3kg/cm^2,\;2kg/cm^2,\;1.5kg/cm^2,\;1kg/cm^2$, bring about a noise and inquires how does noise level indicates according to each instruments. In case of a water supply pressure standard, $3kg/cm^2$, a C-605is $3{\sim}5dB(A)$ lower than another instruments in directly overhead stories. It appears that all of them is similar to level in directly under level except c-407(2)Analyzed the NC value, c-605is the lowest level, NC-50, of a water supply pressure, $4.0kg/cm^2$, c-407 is the highest level, NC-55.(3) In case of N value, which is one of water supply methods in Japan, it is the lowest level, N-55, of a water supply pressure, $4.0kg/cm^2$ same as NC value and C-407is the highest level, N-60.(4) In case of water supply that is likely to noise level, It appears 6dB(A) level gap each instruments, and C-605 is the lowest level, 63.9dB(A).