• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.35-42
• /
• 1973

Deciduous trees grown naturally in the forest of Korea usually have an irregular Lee-form and their utility has been decreased. In Korea, most of the deciduous stands are distributed in the hinterland. A shortage of the total growing stock made utilization of them necessary in this country even though some difficulties to be cutted and transported are accompanied. Therefore, this study was conducted to select the suitable sampling method for surveying them. The results investigated are as follows. 1. Three locations being 10 hectares in each location for the plots were chosen and surveyed with six $20m{\times}50m$ rectangular sample plots by four types of sampling method below. And the result is shown in Table 1. A. Random sampling by grids B. Random sampling by co-ordinates C. Systematic line plot. D. Sub-sampling 2. One hundred and fifty hectares from all plots were sectioned through the application of aerial photography scaled of 1 : 15,000. The author divided forest types according to diameter class and crown density with mirror stereoscope. The forest types were divided into three classes. Seven sample plots from the area of 150 hectars are systematically arranged and the results investigated on the circular sample point of 0.1 hectare are shown in Table 4. 3. There were no significant differences between results by sampling method and by diameter measurement method (population mean) as shown in Table 3. 4. Random sampling by grid and systematic line plot are better than others. 5. There are more over-estimated values when the circular sample point is used than where the rectangular sample point. 6. As forest stands are irregular, smaller number of sample points will make many errors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.275-283
• /
• 2010

This experiment was conducted to construct process models to estimate grain weight (GW) and grain nitrogen content (GN) in rice. A model was developed to describe the dynamic pattern of GW and GN during grain-filling period considering their relationships with temperature, solar radiation and growth traits such as LAI, shoot dry-weight, shoot nitrogen content, grain number during grain filling. Firstly, maximum grain weight (GWmax) and maximum grain nitrogen content (GNmax) equation was formulated in relation to Accumulated effective temperature (AET) ${\times}$ Accumulated radiation (AR) using boundary line analysis. Secondly, GW and GN equation were created by relating the difference between GW and GWmax and the difference between GN and GNmax, respectively, with growth traits. Considering the statistics such as coefficient of determination and relative root mean square of error and number of predictor variables, appropriate models for GW and GN were selected. Model for GW includes GWmax determined by AET ${\times}$ AR, shoot dry weight and grain number per unit land area as predictor variables while model for GN includes GNmax determined by AET ${\times}$ AR, shoot N content and grain number per unit land area. These models could explain the variations of GW and GN caused not only by variations of temperature and solar radiation but also by variations of growth traits due to different sowing date, nitrogen fertilization amount and row spacing with relatively high accuracy.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.643-652
• /
• 2002

Data were consisted of the ten body measurements (withers height, rump height, body length, chest depth, chest width, rump width, rump length, thurls width, hipbone width and chest girth) of 642 steers (Korean cattle), which was entered in the National Beef Quality Contest hosted by the Korea Animal Improvement Association from 1997 to 2001. A principal components analysis was used to classify the body types of the steers, and estimate the correlations between carcass traits and principal components for the body measurements of the first, second, third and fourth period, respectively. The first principal component of body measurements at the first, second, third and fourth period accounted for 76.0%, 83.0%, 72.7% and 57.4% of the total variance, respectively. The sum of first, second and third principal component at each period accounted for 86.69%, 90.49%, 84.62% and 77.26% of the total variance, respectively. At each period, all the first principal component of the body measurements were positive and it generally showed large framed body shape. The size of body was influenced mostly by chest depth(0.328${\sim}$0.339) and rump length(0.325${\sim}$0.341). The second, third and fourth principal component at the each period were various. There were positive correlations between principal components index of each period and carcass traits such as carcass weight(0.539${\sim}$0.755), average daily gain(0.256${\sim}$0.564), backfat thickness(0.227${\sim}$0.280), and eye muscle area(0.187${\sim}$0.344). The correlation with yield grade index(－0.246${\sim}$－0.110), however, was negative. The correlation with marbling score(0.066${\sim}$0.099) was low or statistically insignificant. According to principal component indexes of the second, third, and fourth components, the correlations with the carcass traits were various. There were no large differences between the correlations of the single body measurement trait with the carcass traits and the correlations of the first principal component indexes with the carcass traits.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.130-137
• /
• 2008

This study was carried out to investigate the effects of olive oil on the quality characteristics of pressed ham. Five different treatments were tested based on differences in the amount of olive oil added to the pressed ham. As a control, 10% back fat was added without any olive oil. For the first treatment, 5% olive oil replaced a portion of the lard component added to the press ham. For the 2nd, 3rd and 4th treatments, 10%, 15% and 20% of olive oil were substituted for lard, respectively. Pressed ham manufactured with olive oil was vacuum packaged and stored for 1, 7, 14, 21 and 28 days at $4^{\circ}C$. Samples were analyzed for shear force value, sensory properties, TBARS values and fatty acid composition. Shear force values increased significantly during storage for all treatments. No remarkable differences were found in sensory properties (color, flavor, texture, and acceptability) between the control and olive oil treated hams, and there was no clear change with increased storage time. There was no significant difference in TBARS values between the control and olive oil treated hams. The TBARS values increased significantly during storage for all treatments. With regard to changes in fatty acid composition, the contents of C14:0-C20:4 were decreased significantly by the addition of olive oil. The saturated fatty acid and polyunsaturated fatty acid contents of the control were significantly higher than the olive oil treated hams. Higher levels of added olive oil resulted in significantly higher monounsaturated fatty acid contents. Based on these findings, we conclude that the sensory properties and lipid oxidation (TBARS) of manufactured pressed hams are not affected by olive oil addition. These results also indicate that high-quality pressed ham can be manufactured with increased monounsaturated fatty acid content.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.57-69
• /
• 2014

As of 2013, Korean population density is 505 persons per $1km^2$ and is ranked 3rd place in the most densely populated countries exception of city-states. It shows clearly the population is concentrated in the city area. To fulfil this urban concentration population demand, the enlargement and complexation of buildings, subway and other underground spaces connection tendency has been intensified, and it is need to construct the indoor spatial information DB as well as the accurate indoor surveying DB to promote people's safety and social welfare. In this study, Sadang station and Incheon National Airport were aimed for the construction of Wi-Fi AP location DB and RadioMap DB by collecting the indoor AP raw datas by using mobile device and those collected results were ran through the process of verification, supplementation, and analyzation. To evaluate the performance of constructed DB, 10 points in Incheon Airport- 3rd flr in block A, and 9 points in Sadang station-B1 were selected and calculated the estimated points and ran evaluation experiment using survey positioning error, which is distance between real position and the estimated position. The result shows that Incheon international airport's average and standard deviation was separately 17.81m, 17.79m and Sadang station's average and standard deviation was separately 22.64m, 23.74m. In Sadang station's case, the areas near the exit has low performance of surveying position due to fewer visible AP points than other areas. As total datas were examined except those position, it was verified that the user's location was mapping close position in surveying positioning by using constructed DB. It means that constructed DB contains correct Wi-Fi AP locations and radio wave patterns in object region, so it is considered that the indoor spatial information service based on constructed DB would be available.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1038-1044
• /
• 1996

The salt-fermented anchovy sauce (AS) was packed in round No. 307-1 can, and thermally processed at $121.1^{\circ}C$ to obtain Fo values of 3, 5 and 10. The changes of food components and qualifies by thermal processing of sterilized AS (RAS) were examined. The compositions of AS were as followed; pH 6.81, VBN 394.7 mg/100g, total nitrogen 2,195.5 mg%, amino-nitrogen 1,010.5 mg%, and acidity 10.5 ml. Viable cell counts of AS on 0%, 5%, 20% NaCl-medium were $2.9{\times}10^3,\;9.1{\times}10^3$ and not detected, respectively. And viable cell counts of RAS were not detected. Acidity, total nitrogen and amino nitrogen contents of AS decreased slightly with the severeness of heat treatments, whereas pH and VBN content were increased. Total free amino acid contents of raw AS and RAS were 12,802.5 mg% and $11,212.6{\sim}12,105.4\;mg%$, and major amino acids were alanine, glutamic acid, leucine, isoleucine, valine and lysine. Also contents of IMP, hypoxanthine, TMAO and TMA in AS and RAS were 42.1 mg% and $35.5{\sim}40.9\;mg%$, 103.7 mg% and $103.1{\sim}105.5\;mg%$, 78.8 mg% and $58.2{\sim}71.6\;mg%$, 55.8 mg% and $58.9{\sim}68.5\;mg%$ respectively. And a little changes were observed in whole volatile components of AS with severeness of heat treatments by GC chromatogram patterns. Judging from the chemical and sensory evaluations, the Fo 3 heat treatment sample was not inferior to raw AS, and maintained good quality for 1 year storage.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.487-494
• /
• 1995

To assay the quality of anchovy sauce, 10 kinds of commercial anchovy sauce(CAS) were purchased from markets and traditional anchovy sauce(TAS) were prepared. And their physicochemical-microbial characteristics were compared. The compositions of CAS were as followed; pH $5.5{\sim}5.7$, salinity $21.0{\sim}23.2%$, VBN $92.8{\sim}305.4\;mg/100g$, total nitrogen $928.0{\sim}1870.9\;mg%$, amino-nitrogen $338.6{\sim}680.3\;mg%$, and acidity $11.58{\sim}24.58\;ml$. The CAS was lower in pH, smaller in contents of VBN, total-N, amino-N and larger in contents of moisture, salinity than TAS. In Hunter values, CAS was generally lower in L, b values whereas higher in a and ${\Delta}E$ values than TAS. Viable cell counts on 0% NaCl-medium of CAS and TAS were $6.4{\times}10^1{\sim}3.0{\times}10^5\;and\;8.7{\times}10^4$, and those on 2.5% NaCl-medium were $0.8{\times}10^2{\sim}2.2{\times}10^5\;and\;1.6{\times}10^4{\sim}4.5{\times}10^5$, respectively. These viable cell counts in CAS and TAS were gradually decreased according to storage time. In composition of extractives, total free amino acid contents of CAS and TAS were $5498.5{\sim}12123.8\;mg%$, 12797.9 mg%, and these contents were gradually decreased during storage. The major amino acids were found glutamic acid, alanine and leucine in CAS, and alanine, glutamic acid, leucine and valine in TAS. Also contents of hypoxanthine, TMAO, TMA in CAS and TAS were shown $86.4{\sim}161.2\;mg%,\;51.6{\sim}99.2\;mg%,\;23.2{\sim}42.9\;mg%$ and 103.7 mg%, 128.8 mg%, 55.8 mg%, respectively. We may conclude from the results of present experiments that parts of tested CAS were somewhat putrefied and there was a great difference in the quality compared with TAS, whereas TAS maintained good conditions for preserving the quality until storage 2 years.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.286-296
• /
• 2010

The purpose of this study is to develop fresh pasta added with mulberry leaf powder as functional fresh pasta. Through previous research, the mixture of 40% of flour and 60% of rice powder was optimum for making noodles with mulberry leaf powder. Making fresh pasta with 40% of wheat flour, 60% of rice powder (optimum moo for making noodles) and mulberry leaf powder(0.5% 1.0% 1.5% 2.0%) was done, followed by the mechanical test(moisture content, color value, texture, tension) and the sensory analysis(quantitative descriptive analysis, preference test). Moisture contents of raw pasta and cooked pasta were the highest in control; scores for moisture contents of cooked pasta were higher than those of raw pasta. The result indicated that the more mulberry leaf powder was, the lower L-value and a-value were in raw pasta and cooked pasta. While the b-vale(yellowness) of raw pasta was the highest in control(9.81), 1.0% of mulberry powder addition sample was the highest in cooked pasta. For hardness, the 2.0% of mulberry leaf powder addition sample has high scores, and adhesiveness and chewiness were no significant difference. The 0.5% of mulberry leaf powder addition sample was the longest in tension distance, which was resulted from the lack of water contents in mulberry leaf powder. In cooked pasta, tension distance had no significant difference between the samples, and force showed the highest score in control. The quantitative descriptive analysis showed that color intensity, savory taste, bitterness were the highest in the 2.0% of mulberry leaf powder addition sample. Gloss and chewiness were no significant difference between the samples. Grassy flavor, savory flavor, bitterness and grainess were intense as mulberry leaf powder was added The preference test showed that MRP 1.5 containing 1.5% of mulberry leaf powder was the most preferable for color, texture and overall quality. In conclusion, 40% of wheat flour, 60% of rice powder and 1.5% of mulberry leaf powder made the best formula of fresh pasta with mulberry leaves.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.6
• /
• pp.293-299
• /
• 2005

To determine optimal fermentation period of vegetables mixed with black sugar without innoculation of microorganisms, changes in chemical components, quality characteristics of the fermented broth and physiological functionality during the fermentation period were investigated, pH and $^{\circ}BX$ of the fermented broths were decreased gradually during the fermentation period. Except for radish, L and a color values of fermented broths were increased but b values were decreased during fermentation period. Viscosity of fermented broths of vegetables were decreased after 3 months of fermentation. ${\alpha}-Amylase$ activity in fermentation broth of brocolli, eggplant, cabbage, chicory, aralia, radish were increased to 460, 430, 180, 420, 560, 260 after six months fermentation period. In radish and tomato fermentation broth, invertase activity were increased to 200 and 460 units and cellulase activity were increased to 280 and 140 after six months fermentation period. The content of total phenolic compounds and electron donating ability were the highest after 2 to 4 months fermentation period and decreased thereafter. No significant level of tyrosinase inhibitory activity and SOD-like activity were observed. In the sensory evaluation test of aralia fermentation broth of droop, sweet and sour flavor and bitter, astringent taste were decreased during the fermentation period and droop tastes were highest in 3 months. In radish fermentation broth, radish flavor and pungent taste were decreased and sweet taste was increased during fermentation period. Acceptability in overall was the greatest after three months. Based on the results stated above, optimal fermentation period was appropriated 3 or 4 months.