• 제목/요약/키워드: $ZrB_2$

검색결과 342건 처리시간 0.028초

국산 지르콘사를 이용한 부분 안정화 지르코니아의 제조 및 그 응용에 관한 연구 : II. 부분 안정화 지르코니아 소결체의 제조 및 그 특성 (The Study on the Preparation of Partially Stabilized Zirconia from Domestic Zircon Sand and its Application : II. The Fabrication of Sintered PSZ and its Properties)

  • 김환;선우식;강종봉;심규송;신건철;황규홍
    • 한국세라믹학회지
    • /
    • 제25권2호
    • /
    • pp.131-135
    • /
    • 1988
  • The microstructural changes in partially stabilized MgO-ZrO2 alloys during heat treatment and mechanical properties of ZrO2(Y2O3)/Al2O3 systems have been studied. 9mol% MgO-ZrO2 powders were sintered at 1800$^{\circ}C$ for 4 hours and these specimens were aged at 1420$^{\circ}C$ and 1100$^{\circ}C$ secondly. These specimens have high thermal shock resistance and high toughness. The bend strength of Y-PSZ/Al2O3 composites conventially sintered were increased by HIP from 650MPa to 980MPa.

  • PDF

후막페이스트용 Glass Frit의 내산성에 미치는 제조방법 및 첨가제의 영향 (The Effects of Additives and Fabrication Methods on Durability in Acid of Glass Frit for Thick Film Paste)

  • 장규철;노태형;구본급;임대영;김호기
    • 마이크로전자및패키징학회지
    • /
    • 제7권2호
    • /
    • pp.29-36
    • /
    • 2000
  • 후막 페이스트용 glass frit의 내산성에 영향을 미치는 프릿트 제조방법 및 첨가제의 영향을 연구하였다. 프릿트 제조 방법에 따른 내산성을 관찰하기 위하여 $PbO-SiO_2-B_2O_3$기본 조성을 습식 및 건식 등의 흔합 방법 및 용융 횟수를 변수로 연구하였고, 첨가제에 의한 내산성 연구를 위하여 첨가제로 $ZrO_2$, $Al_2O_3$, $TiO_2$등을 0-l0wt% 첨가하여 첨가제에 따른 내산성 변화를 관찰하였다.

  • PDF

Magnetoimpedance Effect in Nanocrystalline Fe91.5-xZr7BxCu1Al0.5 (x=2, 4, 6, 8) Alloys

  • Lee, Heebok;Kim, Yong-Kook;Kim, Taik-Kee;Kim, Chong-Oh;Yu, Seong-Cho
    • Journal of Magnetics
    • /
    • 제7권1호
    • /
    • pp.21-23
    • /
    • 2002
  • The magnetoimpedance of $Fe_{91.5-x}Zr_7B_xCu_1Al_{0.5}$alloys has been measured to investigate the influence of structural changes in the nanocrystallization process after thermal treatment. Annealing was performed at temperatures of $350^\circ{C}$, $450^\circ{C}$, and $550^\circ{C}$ for 1 hour in a vacuum. Ultra soft magnetic behavior was observed in the samples annealed at $550^\circ{C}$. The magnetoimpedance ratio and the longitudinal permeability ratio coincided with the softness of the magnetic properties of the thermally treated samples.

$0.05Pb(Al_{2/3}W_{1/3})O_3-0.95Pb(Zr_{0.52}Ti_{0.48})O_3$계를 이용한 세라믹 필터 특성 (Characteristics of the Ceramic Filter Using $0.05Pb(Al_{2/3}W_{1/3})O_3-0.95Pb(Zr_{0.52}Ti_{0.48}O_3$Ceramic System)

  • 김남진;윤석진;유광수;김현재;정형진
    • 한국결정성장학회지
    • /
    • 제2권2호
    • /
    • pp.71-76
    • /
    • 1992
  • $0.05Pb(Al_{2/3}W_{1/3})O_3-0.95Pb(Zr_{0.52}Ti0.48)O_3$를 기본 조성으로 $MnO_2,Fe_2O_3$를 첨가제로 하여 사진식각법(Photolithography)을 이용 세라믹 필터를 제작하였다. $MnO_2$의 첨가량이 증가함에 따라 전기 기계 결합 계수(Kp)가 낮아지며, $Fe_2O_3$의 경우 Kp값은 57% 정도로 우수하나 기계적 품질 계수(Qm)는 $MnO_2$첨가의 경우에 비해 상대적으로 낮은 값을 보여주고 있다. $MnO_2$0.3wt% 첨가의 경우 3dB 대역폭은 155kHz, $ Fe_2O_3$0.1wt%인 경우 260kHz로써 Qmr값이 크기에 반비례하였으며, 군지연시간 특성은 $MnO_2$의 경우 Gaussian 특성을,$Fe_2O_3$의 경우 Butterworth 특성을 나타내었다.

  • PDF

(Pb,Ba)(Zr,Ti)$O_3$계 세라믹스의 )$Y_2O_3$첨가에 따른 유전 및 전왜 특성 (Dielectric and electrostrictive properties of (Pb,Ba)(Zr,Ti))$O_3$ ceramics with $Y_2O_3$addition)

  • 김규수;윤광희;윤현상;홍재일;유주현;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권6호
    • /
    • pp.551-557
    • /
    • 1996
  • To decrease the hysteresis of electric field induced strain, $Y_{2}$ $O_{3}$ dopant of which amount is 0-0.8wt% was added to the (P $b_{0.73}$B $a_{0.27}$)(Z $r_{0}$ 75/ $Ti_{0.25}$) $O_{3}$ ceramics. Electromechanical coupling coefficients of the specimen with 0.1 Wt% $Y_{2}$ $O_{3}$ were $k_{p}$=26.9% and $k_{31}$ =20.4%, which exhibited the maximum value at the constant bias electric field of 10 kV/cm. At the same $Y_{2}$ $O_{3}$ addition amount, electric field piezoelectric constant ( $d_{3l}$) and strain(.DELTA.l/l) showed the maximum values of 139.6*10$^{-12}$ [C/N] and 126*10$^{-6}$ .DELTA. l/l respectively at 10 kV/cm electric field. And the hysteresis of strain showed the minimum value of 17.5%. So, we propose that it is possible to apply PBZT system with $Y_{2}$ $O_{3}$ dopant to the electrostrictive actuator.r.r.

  • PDF

폴리메틸렌 다리로 연결된 양이온 이핵 CGC를 이용한 에틸렌과 1-헥센의 공중합 (Copolymerization of Ethylene and 1-Hexene via Polymethylene Bridged Cationic Dinuclear Constrained Geometry Catalysts)

  • 비안팽링;당황단웨이;류원석;이동호;노석균;김용만
    • 폴리머
    • /
    • 제31권6호
    • /
    • pp.497-504
    • /
    • 2007
  • 길이가 다른 폴리메틸렌 다리로 연결된 이핵 CGC(Constrained geometry catalyst) $[Zr({\eta}^5\;:\;{\eta}^1-C_9H_5-SiMe_2NCMe_3)Me_2]_2\;[(CH_2)_n]$ [n=6(4), 9(5), 12(6)]를 2 당량의 MeLi과 대응되는 염소화합물을 반응시켜 합성하고 이들의 구조를 확인하였다. 합성된 이핵메탈로센의 중합 특성을 에틸렌과 1-hexene의 공중합을 통해 조사하였다. 이때에 사용된 조촉매로는 일반 조촉매 $Ph_3C^+[B(C_6F_5)_4]^-\;(B_1)$$(B(C_6F_5)_5)_3\;(B_3)$ 그리고 이핵조촉매 $Ph_3C^+[(C_6F_5)_3B-C_6F_4-B(C_6F_5)_3]^{2-}\;(B_2)$을 이용하였다. 중합 결과 촉매의 활성은 이핵메탈로센에서는 다리길이가 길수록 크게 나타났으며, 조촉매에서는 이핵조촉매가 가장 낮은 활성을 보였다. 조촉매의 특성은 공중합체에 존재하는 가지의 함량에서 잘 나타났다. 이핵조촉매($B_2$)를 사용하면 가장 가지수가 작은 고분자가 생성되었고, 조촉매 $B_3$에서 가장 많은 가지를 가진 공중합체가 생성되었다.

$Li_2CO_3$ 첨가에 따른 저온소결 PZN-PZT 세라믹스의 유전 및 압전특성 (Dielectric and Piezoelectric Properties of Low Temperature Sintering PZN-PZT Ceramics with a variation of $Li_2CO_3$ Addition)

  • 이유형;이상호;류주현
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.307-307
    • /
    • 2007
  • 압전액츄에이터 및 초음파진동자는 전자제품의 소형화 및 경량화, 의료기기, 모바일기기 및 소형로붓의 발전에 힘입어 그 활용범위가 넓게 확장되고 있다. 1960년 Smolenski등에 의해 $A(B_1,B_2)O_3$형 복합 페로브스카이트 구조를 갖는 강유전성 세라믹스에 대한 연구가 시작된 이래 $Pb(Co,Nb)O_3-Pb(Zr,Ti)O_3$, $Pb(Zn,Nb)O_3-Pb(Zr,Ti)O_3$, $Pb(Mg,Nb)O_3-Pb(Zr,Ti)O_3$ 등 3성분계 세라믹스의 유전, 압전 및 강유전 특성에 대한 많은 연구가 진행되어 왔다. 그러나 압전성이 우수한 세라믹스들은 Pb가 포함되어 있기 때문에 $1000^{\circ}C$ 이상에서 PbO가 급격하게 휘발되는 성질에 따라서 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 과잉 PbO를 첨가시키기 때문에 환경오염뿐만 아니라, 경제적인 측면에서도 많은 문제점을 가지고 있다. 소결조제를 이용한 산화물 첨가법은 PbO의 휘발을 억제하는 저온소결 방법중 가장 효과적인 방법으로 알려져 있다. 따라서, 본 연구에서는 적층형 압전액츄에이터로 사용하기위한 저온소결 압전세라믹스를 개발하기 위하여 PZN-PZT세라믹스에 $Li_2CO_3$, $Bi_2O_3$, CuO 를 소결조제로 사용하여 $Li_2CO_3$의 첨가량 변화에 따른 압전 및 유전 특성을 관찰하였다.

  • PDF

Al-Cu-Li-Mg-Ag-Zr합금의 시효에 따른 전기화학적 분극 거동과 공식특성 (Pitting Characteristics and Electrochemical Polarization Behaviors in Al-Cu-Si-Mg-Ag-Zr Alloys with Ageing)

  • 민병철;정동석;손태원;조현기
    • 열처리공학회지
    • /
    • 제9권2호
    • /
    • pp.103-111
    • /
    • 1996
  • In this paper, we studied on both electrochemical polarization behaviors and pitting characteristics of ultra high strength Al-Cu-Li-Mg-Ag-Zr alloys(named C1 and C2) and 2090 alloy according to their treatments in the deaerated 3.5% NaCl, using by the potentiodynamic and the potentiostatic method, SEM micrograph and surface roughness including depth of pitting attack. With the cyclic polarization curves, the hysteresis of the C1 and C2 alloys appeared more remarkably than that of the 2090 alloy, because of precipitation microstructural difference between C1, C2 alloys and 2090 alloy. In the pitting experiments, the correlations between pitting growth and aging conditions were analyzed with the SEM micrograph and measurement of the pit depth.

  • PDF

L $u_2$ $O_3$ 치환에 따른 Pb(Sb,Mn) $O_3$-Pb(Zr,Ti) $O_3$ 세라믹스의 압전특성 (Piezoelectric properties of Pb(Sb,Mn) $O_3$- Pb(Zr,Ti) $O_3$ Ceramics doped L $u_2$ $O_3$)

  • 이동균;윤석진;;김현재;한득영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 추계학술대회 논문집
    • /
    • pp.60-63
    • /
    • 1997
  • Dieletric ailed piezoelectric properties of Pb[$Zr_{0.45}$/ $Ti_{0.5-x}$/L $u_{x}$ (M $n_{1}$3//S $b_{2}$3)$_{0.05}$] $O_3$(0$\leq$x $\leq$0.03) were investigated. The partial substitution of $Ti^{4+}$ by a L $u^{3+}$ permitted improvement of the piezoelectric constant( $d_{33}$ ), electromechanical coupling factor ( $k_{p}$ ) and dielectric constant($\varepsilon$$_{33}$ /Sup T/). The dielectric loss(tan $\delta$ ) increased and mechanical quality factor(Qm) decreased with an increase of x were observed. A new piezoelectric material for actuator application was developed at x=0.02 with $d_{33}$ =370$\times$10$^{-2}$ /C/N, $k_{p}$ =58.5%, $\varepsilon$$_{33}$ $^{T}$ =1321, $Q_{m}$ =714 and tan $\delta$ =0.98%.%..%.%.

  • PDF