• Journal of Magnetics
• /
• 제3권2호
• /
• pp.41-43
• /
• 1998

The frequency spectra of complex permeability have been measured as a function of ac field amplitude in the annealed amorphous $Fe_{83}Zr_7B_8Cu_2 $ ribbons. The longitudinal permeability results from the rotational magnetization at small fields, $h_o$<5 mOe in as-quenched samples. However, at the further increase of ho, the wall motion begins to be involved in the low frequency region. The permeability from the wall motion drastically decreases in the annealed sample, while that from the rotational magnetization increases up to annealing temperature of 50$0^{\circ}C$ and then drops there after.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.404-407
• /
• 2016

In this study, to develop low temperature sintering capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3$ (BCTZ) ceramics were prepared by the conventional solid-state reaction method. The effects of $B_2O_3$ addition on the dielectric properties and microstructure was investigated. The XRD patterns demonstrated that all the specimens showed Perovskite phase, and secondary phases are indicated in the measurement range of XRD. And also, temperature coefficient of capacitance(TCC) of all the specimen sintered at $1,180^{\circ}C$ showed +3~-56% except for x=0.006. For all the specimens, observed one peak was tetragonal cubic difuse phase transition temperature(Tc), which is located in the vicinity of room temperature.

• 폴리머
• /
• 제24권5호
• /
• pp.646-655
• /
• 2000

이소특이성 촉매인 rac-(EBI)M($NMe_2$)$_2$ [EBI=1,2-ethylenebis-(1-indenyl); M=Zr (rac-1), M=Hf(rac-2)와 공촉매계로서 Al(iBu)$_3$/[Ph$_3$C][B($C_{6}F_{5}$)$_4$]를 이용하여 고차 $\alpha$-올레핀의 중합특성을 조사하였다. 고차 $\alpha$-올레핀의 중합은 높은 활성을 나타냈으며, rac-1과 rac-2의 두 촉매계는 유사한 중합거동을 나타냈다. 중합 활성은 단량체의 크기와 중합된 고분자 가지의 길이에 의해 영향을 받았다. 단량체의 전환율은 1-pentene>1-hexene>1-octene>1-decene의 순서로 감소하였다. 또한 합성된 폴리($\alpha$-올레핀)의 고유점도값과 시차주사열분석기에 의한 용융거동도 유사한 경향을 나타냈다. 폴리 ($\alpha$-올레핀)은 매우 높은 이소탁틱도 트리에드를 나타냈으며 poly(1-pentene)$^1H$ NMR과 Raman 스펙트럼을 이용한 고분자 사슬의 말단기 분석 결과로부터, 주로 일어나는 사슬정지반응은 말단에 포화된 메틸기를 생성하는 공촉매로의 전이이며, 소수 반응으로 비닐리덴, 삼차치환 및 비닐렌 이중결합을 생성하는 $\beta$-수소제거 반응이 일어남을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2614-2624
• /
• 2022

Monte Carlo simulations were used to model a portable Neutron backscattering (NBT) sensor suitable for detecting plastic anti-personnel mines (APMs) buried in dry and moist soils. The model consists of a 100 MBq ²⁵²Cf source encapsulated in a neutron reflector/shield assembly and centered between two ³He detectors. Multi-parameter optimization was performed to investigate the efficiency of Be/Zr(BH₄)₄ and Be/Be(BH₄)₂ assemblies in terms of increasing the signal-to-background (S/B) ratio and reducing the total dose equivalent rate. The MCNP results showed that 2 cm Be/3 cm Zr(BH₄)₄ and 2 cm Be/3 cm Be(BH₄)₂ are the optimal configurations. However, due to portability requirements and abundance of Be, the ²⁵²Cf-2 cm Be/3 cm Be(BH₄)₂ NBT model was selected to scan the center of APM buried 3 cm deep in dry and moist soils. The selected NBT model has positively identified the APM with a S/B ratio of 886 for dry soils of 1 wt% hydrogen content and with S/B ratios of 615, 398, 86, and 12 for the moist soils containing 4, 6, 10, and 14 wt% hydrogen, respectively. The total dose equivalent rate reached 0.0031 mSv/h, suggesting a work load of 8 h/day for 806 days within the permissible annual dose limit of 20 mSv.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.54-61
• /
• 2000

마그네트론 스퍼터를 사용하여 증착한 CoNbZr 합금박막의 제조 조건 및 열처리에 따르는 구조 및 자기적 성질의 변화를 연구하였다. Ar분압 2mTorr, RF 인가전력 130 W에서 증착되어진 $Co_{87.0}$N $b_{8.5}$Z $r_{4.5}$막은 최대 비저항 3000 $\mu$Ω.cm을 나타냄으로써 가장 안정한 비정질상을 형성하였으며 100 MHz에서 1095의 최대투자율, 1.75 Oe의 최소 보자력을 나타내었다. Ar 분압이 2 mTorr 이상으로 증가할 경우 그리고 RF 인가전력이 130 W 이상으로 증가할 경우 주상정 구조의 발달과 불안정한 비정질상의 형성으로 투자율은 감소하고 보자력은 증가하는 것을 확인하였다 1 mTorr에서 증착되어진 막과 190 W에서 증착되어진 막은 결정질 상을 형성하여 100 이하의 낮은 투자율과 60 Oe의 높은 보자력을 나타내었다. 회전자장중 열처리에 의해 이방성을 제어할 수 있음을 확인하였으며, 증착상태에서 보였던 1095의 투자율은 1345로 증가하였다.증가하였다.

• 열처리공학회지
• /
• 제18권5호
• /
• pp.312-317
• /
• 2005

The precipitation process in Cu-0.2 wt.%Cr-0.05 wt.%Zr alloys has been studied by electrical electrical resistivity measurements. The kinetics of precipitation could be well described by Johnson-Mehl-Avrami equation, $f(t)=1-\exp(-kt^n)$. The values of n were found to be in the range of 0.36~0.42 at first stage and 1.3~1.6 at second stage. The activation energy was determined by cross-cut method and was 80~89 kJ/mol. The value is similar to the energy for the migration of either a vacancy or a vacancy-solute complex through the lattice.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.14-21
• /
• 2003

Thin films of ZrO$_2$ and TiO$_2$ were deposited on Si(100) substrates using RF magnetron sputtering technique. To study an influence of the sputtering parameters, systematic experiments were carried out in this work. XRD data show that the $ZrO_2$ films were mainly grown in the [111] orientation at the annealing temperature between 800 and $1000^{\circ}C$ while the crystal growth direction was changed to be [012] at above $1000^{\circ}C$. FT-IR spectra show that the oxygen stretching peaks become strong due to $SiO_2$ layer formation between film layers and silicon surface after annealing, and proved that a diffusion caused by either oxygen atoms of $ZrO_2$ layers or air into the interface during annealing. Different crystal growth directions were observed with the various deposition parameters such as annealing temperature, RF power magnitude, and added $O_2$ amounts. The growth rate of $TiO_2$ thin films was increased with RF power magnitude up to 150 watt, and was then decreased due to a sputtering effect. The maximum growth rate observed at 150 watt was 1500 nm/hr. Highly oriented, crack-free, stoichiometric polycrystalline $TiO_2$<110> thin film with Rutile phase was obtained after annealing at $1000^{\circ}C$ for 1 hour.

• 한국건설순환자원학회논문집
• /
• 제3권3호
• /
• pp.220-227
• /
• 2015

초고성능 콘크리트(UHPC)는 낮은 물-결합재비를 바탕으로 다량의 강섬유, 실리카퓸, 충전재 및 고성능 감수제를 사용한다. UHPC는 높은 역학적 성능을 가지는 대신 실리카퓸을 사용함에 따라 점성이 증가되며 고가의 재료를 다량으로 사용하기 때문에 제조비용이 일반 콘크리트에 비하여 고가이다. 따라서 본 연구에서는 180MPa급 UHPC의 점성 저하를 위하여 실리카퓸 대신 지르코늄 실리카퓸(Zr)을 사용한 UHPC의 고성능 감수제(SP)의 사용량 및 종류, 충전재 크기에 따른 공학적 특성을 분석하였다. 그 결과 W/B 20%, Zr 100% 사용, SP-L 사용량 2~3%, 강섬유 혼입율 1.5 vol.%이고 $4{\mu}m$의 충전재를 사용하는 Zr-UHPC의 경우 기존의 실리카퓸을 사용한 배합에 비하여 우수한 유동성을 발현하고 압축강도 180MPa이상 확보 하였다. 또한 기존 UHPC 대비 33%의 제조비용 절감이 가능한 것으로 분석되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권2호
• /
• pp.20-23
• /
• 2008

[ $La_2Zr_2O_7$] (LZO) buffer layers were deposited on biaxially textured Ni-W substrates by chemical solution deposition method (CSD). In this study, the effect of $B_2O_3$ addition on texture and surface roughness of LZO films was investigated. The alkoxide-based precursor solution was employed to synthesize the precursor solution of LZO and the solution was coated on biaxially textured Ni-W substrates and subsequently annealed at $900^{\circ}C$ for crystallization. The pure LZO film without $B_2O_3$ addition showed a (222) reflection in the X-ray diffraction (XRD) profile. The intensity of (222) reflection was enhanced and more rough surface was obtained after further repetition of coating. Contrary to this, the LZO film prepared by $B_2O_3$ added precursor solution shows well-developed (400) reflection peak in the XRD profile and excellent biaxial texture (${\Delta}{\theta}=4.3^{\circ}$, ${\Delta}{\phi}=6.8^{\circ}$). The surface roughness of LZO films were also improved by addition of $B_2O_3$ even after multicoating ($R_{rms}{\sim}3.1nm$). It was shown that the LZO film with smooth surface and biaxial texture was grown on the biaxially textured Ni-W substrates with addition of $B_2O_3$ in the precursor solution.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.