• 제목/요약/키워드: $ZnIn_2Se_4$

검색결과 232건 처리시간 0.026초

CBD 공법을 이용하여 Cd2+ 원소 Alloying 시간을 조절한 Cu2Zn1-xCdxSn(SxSe1-x)4 박막 태양전지의 광전지 성능 향상 분석 (Analysis of Photovoltaic Performance Improvement of Cu2Zn1-xCdxSn(SxSe1-x)4 Thin Film Solar Cells by Controlling Cd2+ Element Alloying Time Using CBD Method)

  • 박상우;장수영;장준성;김진혁
    • 한국재료학회지
    • /
    • 제32권11호
    • /
    • pp.481-488
    • /
    • 2022
  • The Cu2ZnSn(SxSe1-x)4 (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se2 (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn2+ element with a Cd2+element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd2+ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (Jsc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd2+ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd2+ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd2+ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, Jsc of 34.0 mA/cm2, and fill factor (FF) of 62.7 %, respectively.

Sputtering effect on chemical state changes in amorphous Ga-In-Zn-O thin film

  • 이미지;강세준;백재윤;김형도;정재관;이재철;이재학;신현준
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.134-134
    • /
    • 2010
  • Ga-In-Zn-O 물질은 비정질상태에서 높은 전하 운동성을 가지고 있으며 차세대 투명전극 thin film transistor 대안 소재로 각광받고 있다. 그런데 이 물질은 ion sputtering에 따라 전기적인 특성에 큰 변화가 관찰되고 있으며, 이는 표면에서의 화학적 상태가 전기적 특성을 좌우할 것이라는 것을 의미한다. 또한 보다 안정적이고 신뢰적인 소자를 구현하기 위해서는 ion sputtering에 의한 표면에서의 화학적 특성 변화를 이해하는 것이 매우 중요하다는 것을 의미한다. 본 연구에서는 $Ga_2O_3:In_2O_3$:ZnO의 비율이 각각 1:1:1, 2:2:1, 3:2:1 그리고 4:2:1인 시료를 $Ne^+$이온을 이용하여 sputtering하면서 표면에 민감한 분광분석 기법인 x-ray photoelectron spectroscopy와 x-ray absorption spectroscopy를 이용하여 분광정보의 변화들을 연구하였다. 실험에 의하면, Ga 3d의 양에 비해서 In 4d, Zn 3d의 양은 sputtering 시간에 따라서 각 각 양이 줄어들었으며, 전체적으로 보다 산화가가 높은 경향을 보였으며, valence band maximum 근처에 subgap state를 형성하는 것을 관찰하였다. 또한 sputtering을 계속하는 경우 In 3d, In 4d, 및 Fermi energy 근처에 metallic state가 형성되는 것을 관찰하였다. 이러한 subgap state와 metallic state의 관측은 각기 sputtering에 따라서, 아직 명확하지는 않지만, surface state의 형성 및/혹은 oxygen interstitial의 형성 그리고 metallic In의 형성 및/혹은 oxygen defect의 형성이 이루어지는 것을 의미한다.

  • PDF

DC 마그네트론 스터링법을 이용하여 증착한 Ga, Al, In 첨가 ZnO 박막의 특성 (Characterization of Ga, Al or In Doped ZnO Films Deposited by DC Magnetron Sputtering)

  • 박상은;박세훈;;송풍근
    • 한국표면공학회지
    • /
    • 제41권4호
    • /
    • pp.142-146
    • /
    • 2008
  • Trivalent ions(Ga, Al, In) doped ZnO films were deposited by DC magnetron sputtering on non-alkali glass substrate at substrate temperature of $300^{\circ}C$. We used the different three types of high density($95%{\sim}$) ceramic sintered disks(doped with $Ga_2O_3$; 6.65 wt%, $Al_2O_3$; 3.0 wt%, $In_2O_3$; 9.54 wt%). This study examined the effect of different dopants(Ga, Al, In) on the electrical, structural, and optical properties of the films. The lowest resistivity of $5.14{\times}10^{-4}{\Omega}cm$ and the highest optical band gap of 3.74 eV were obtained by Ga doped ZnO(GZO) film. All the films had a preferred orientation along the(002) direction, indicating that the growth orientation has a c-axis perpendicular to the substrate surface. The average transmittance of the films was more than 85% in the visible range.

ZnO 기반 NO2 가스센서의 MgZnO와 MgO을 통한 성능 향상에 대한 연구 (Study on the Performance Improvement of ZnO-based NO2 Gas Sensor through MgZnO and MgO)

  • 박소영;이세형;박찬영;백동기;이문석
    • 센서학회지
    • /
    • 제31권6호
    • /
    • pp.455-460
    • /
    • 2022
  • Brush-like ZnO hierarchical nanostructures decorated with MgxZn1-xO (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were fabricated and examined for application to a gas sensor. They were synthesized using vapor phase growth (VPG) on indium tin oxide (ITO) substrates. To generate electronic accumulation at ZnO surface, MgZnO nanoparticles were prepared by sol-gel method, and the ratio of Mg and Zn was adjusted to optimize the device for NO2 gas detection. As the electrons in the accumulation layer generated by the heterojunction reacted faster and more frequently with the gas, the sensitivity and speed improved. When tested as sensing materials for gas sensors at 100 ppm NO2 at 300℃, these MgZnO decorated ZnO nanostructures exhibited an improvement from 165 to 514 times compared to pristine ZnO. The response and recovery time of the MgZnO decorated ZnO samples were shorter than those of the pristine ZnO. Various analyzing techniques, including field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray powder diffraction (XRD) were employed to confirm the growth morphology, atomic composition, and crystalline information of the samples, respectively.

Effects of High Dietary Levels of Selenium-Enriched Yeast and Sodium Selenite on Macro and Micro Mineral Metabolism in Grower-Finisher Swine

  • Kim, Y.Y.;Mahan, D.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권2호
    • /
    • pp.243-249
    • /
    • 2001
  • Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.

대구시 지하수의 수질특성 (The Characteristics of Groundwaters in Taegu City)

  • 박병윤;천경아;이동훈;최충렬;최정;김진호
    • 한국환경과학회지
    • /
    • 제8권6호
    • /
    • pp.685-690
    • /
    • 1999
  • The pollution characteristics of groundwaters in Taegu City and correlation coefficients(r) between water pollution indicators were investigated for two years from January 1996 to December 1997. Volatile organic compounds such as TCE(tri-chloroethylene), PCE(tetrachloroethylene), l,l,l-trichloroethane, THM(trihalo-methane), dichloromethane, pesticides such as diazinon, parathion, malathion, and toxic inoganic matters such as As, Hg, Se, Pb, Cd, $Cr_6^+,$ CN were not detected in the groundwaters. Mean values of groundwater pollution indicators were below drinking-water standards, but hardness, $KMnO_4-C(potassium$ permanganate consumption), evaporate residues, $SO_4^{-2},\;Fe,\;NO_3^{-}-N,$ color and turbidity exceeded a little in some samples. As groundwater became deeper, hardness and evaporate residues remarkably increased, but $KMnO_4-C,\;NO_3^{-}-N,\;Cl-,$ color, turbity and bacteria decreased. $KMnO_4-C,$ evaporate residues, $Cl^-\;and\;SO_4^{-2}$ were very high at industrial and commercial areas, and $NO_3^--N$ and $NH_4^+-N$ were very high at agricultural and forest areas. It showed high positive significances in the relationships between hardness and each of evaporate residues, $SO_4^{-2}$, Zn and Mn, $KMnO_4-C$ and each of color, turbidity and Zn, color and each of turbidity, Cu, Zn and Mn, turbidity and each of Fe, Cu, Zn and Mn, and evaporate residues and each of $Cl^-,\;SO_4^{-2}$ and Zn.

  • PDF

오적산(五積散)을 투여한 흰쥐의 간장, 신장, 골중 금속농도 비교에 관한 연구 (Comparison of Liver, Kidney, Bone Metal Concentration in OhJeokSan-Treated Rats)

  • 박철수;이선동;박해모;박영철
    • 대한예방한의학회지
    • /
    • 제6권2호
    • /
    • pp.66-85
    • /
    • 2002
  • Traditional herbal medicine is used extensively among the Korean populations, and other Asian countries employ similar therapies as well In recent years, extensive focus was laid on adulteration of the herbal medicine with heavy metals. This may be mainly due to a soil contamination by an environmental pollution. The objective of this study is to identify the contents of various heavy metals in the blood from OhJeokSan-Decoction (OD) treated-rats. For this study, 13 kinds of metals including essential and heavy metals, i.e. Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se and Zn were analyzed by a slight modification of EPA methods and the following results are obtained. ; 1. There is no significant difference between the OD-treated groups and control group in liver, kidney, bone, brain, weight, food intake. 2. The amount of each metal analyzed in the liver are as follows; Al ; $0.235{\sim}4.215mg/kg$, As ; $0.103{\sim}0.461mg/kg$, Cd ; $0.005{\sim}0.010mg/kg$, Co ; $0.017{\sim}0.046mg/kg$, Cr ; $0.137{\sim}0.403mg/kg$, Cu ; $1.736{\sim}4.827mg/kg$, Fe ; $54.472{\sim}381.447mg/kg$, Hg ; not detected, Mn ; $1.159{\sim}2.803mg/kg$, Ni ; $0.007{\sim}0.095mg/kg$, Pb ; not detected, Se ; $0.682{\sim}1.887mg/kg$, Zn ; $10.213{\sim}26.119mg/kg$, by groups, respectively. In control and other experimental group, several metal (Co, Cu, Mn, Zn, As, Cr) has a significant difference, but in experimental I and other experimental II, III, IV, V groups, there are no significant difference. 3. The amount of each metal analyzed in the kidney are as follows; Al ; $1.712{\sim}31.230mg/kg$, As ; $0.062{\sim}0.439mg/kg$, Cd ; $0.010{\sim}0.062mg/kg$, Co ; $0.000{\sim}0.101mg/kg$, Cr ; $0.125{\sim}0.636mg/kg$, Cu ; $3.385{\sim}12.502mg/kg$, Fe ; $41.148{\sim}99.709mg/kg$, Hg ; $0.000{\sim}0.270mg/kg$, Mn ; $0.433{\sim}2.301mg/kg$, Ni ; $0.000{\sim}0.221mg/kg$, Pb ; $0.000{\sim}0.584mg/kg$, Se ; $0.540{\sim}1.600mg/kg$, Zn ; $8.775{\sim}17.060mg/kg$, by groups, respectively. The concentration of Cu, Se, Cr, and Hg are variated significantly in control and other experimental group, and Cu, Se, Cd, Cr are variated significantly in experimental I and other experimental II, III, IV, V groups. 4. The amount of each metal analyzed in the bone(tibia and fibula) are as follows; Al ; $9.557{\sim}119.464mg/kg$, As ; $0.139{\sim}12.250mg/kg$, Cd ; $0.000{\sim}0.295mg/kg$, Co ; $0.022{\sim}0.243mg/kg$, Cr ; $0.239{\sim}1.999mg/kg$, Cu ; $0.000{\sim}2.291mg/kg$, Fe ; $240.249{\sim}841.956mg/kg$, Hg ; $0.000{\sim}0.983mg/kg$, Mn ; $0.214{\sim}7.353mg/kg$, Ni ; $5.473{\sim}11.453mg/kg$, Pb ; $0.000{\sim}8.502mg/kg$, Se ; $0.000{\sim}3.005mg/kg$, Zn ; $61.158{\sim}195.038mg/kg$, by groups, respectively. The concentration of Se, Cd are variated significantly in control and other experimental groups, and Se is variated significantly in experimental I and other experimental II, III, IV, V groups. 5. Exceptionally several metal concentration is increased or decreased. but there is no significant harmful difference of metal concentration in the liver, kidney and bone, from the OD-treated-rats compared to those of the control group even if higher dosage($1{\sim}8$ times dosage of person) of OD was administered. Thus, it is expected that the herbal decoction in the traditional herbal medicine would not lay any burden on the body and the heavy metal toxins would not affect our physiological system. However, other kinds of herbal treatment, such as i.v. and i.p. should be considered in terms of metal toxicity in the body since the level of certain metal.

  • PDF

Effects of functional nutrients on chicken intestinal epithelial cells induced with oxidative stress

  • Hyun Woo Kim;Seung Yun Lee;Sun Jin Hur;Dong Yong Kil;Jong Hyuk Kim
    • Journal of Animal Science and Technology
    • /
    • 제65권5호
    • /
    • pp.1040-1052
    • /
    • 2023
  • The objective of this study was to investigate the protective effects of functional nutrients including various functional amino acids, vitamins, and minerals on chicken intestinal epithelial cells (cIECs) treated with oxidative stress. The cIECs were isolated from specific pathogen free eggs. Cells were exposed to 0 mM supplement (control), 20 mM threonine (Thr), 0.4 mM tryptophan (Trp), 1 mM glycine (Gly), 10 μM vitamin C (VC), 40 μM vitamin E (VE), 5 μM vitamin A (VA), 34 μM chromium (Cr), 0.42 μM selenium (Se), and 50 μM zinc (Zn) for 24 h with 6 replicates for each treatment. After 24 h, cells were further incubated with fresh culture medium (positive control, PC) or 1 mM H2O2 with different supplements (negative control, NC and each treatment). Oxidative stress was measured by cell proliferation, whereas tight junction barrier function was analyzed by fluorescein isothiocyanate (FITC)-dextran permeability and transepithelial electrical resistance (TEER). Results indicated that cell viability and TEER values were less (p < 0.05) in NC treatments with oxidative stress than in PC treatments. In addition, FITC-dextran values were greater (p < 0.05) in NC treatments with oxidative stress than in PC treatments. The supplementations of Thr, Trp, Gly, VC, and VE in cells treated with H2O2 showed greater (p < 0.05) cell viability than the supplementation of VA, Cr, Se, and Zn. The supplementations of Trp, Gly, VC, and Se in cells treated with H2O2 showed the least (p < 0.05) cellular permeability. In addition, the supplementation of Thr, VE, VA, Cr, and Zn in cells treated with H2O2 decreased (p < 0.05) cellular permeability. At 48 h, the supplementations of Thr, Trp, and Gly in cells treated with H2O2 showed the greatest (p < 0.05) TEER values among all treatments, and the supplementations of VC and VE in cells treated with H2O2 showed greater (p < 0.05) TEER values than the supplementations of VA, Cr, Se, and Zn in cells treated with H2O2. In conclusion, Thr, Trp, Gly, and VC supplements were effective in improving cell viability and intestinal barrier function of cIECs exposed to oxidative stress.

Bandgap Engineering in CZTSSe Thin Films via Controlling S/(S+Se) Ratio

  • Vijay C. Karade;Jun Sung Jang;Kuldeep Singh, Gour;Yeonwoo Park;Hyeonwook, Park;Jin Hyeok Kim;Jae Ho Yun
    • Current Photovoltaic Research
    • /
    • 제11권3호
    • /
    • pp.67-74
    • /
    • 2023
  • The earth-abundant element-based Cu2ZnSn(S,Se)4 (CZTSSe) thin film solar cells (TFSCs) have attracted greater attention in the photovoltaic (PV) community due to their rapid development in device power conversion efficiency (PCE) >13%. In the present work, we demonstrated the fine-tuning of the bandgap in the CZTSSe TFSCs by altering the sulfur (S) to the selenium (Se) chalcogenide ratio. To achieve this, the CZTSSe absorber layers are fabricated with different S/(S+Se) ratios from 0.02 to 0.08 of their weight percentage. Further compositional, morphological, and optoelectronic properties are studied using various characterization techniques. It is observed that the change in the S/(S+Se) ratios has minimal impact on the overall Cu/(Zn+Sn) composition ratio. In contrast, the S and Se content within the CZTSSe absorber layer gets altered with a change in the S/(S+Se) ratio. It also influences the overall absorber quality and gets worse at higher S/(S+Se). Furthermore, the device performance evaluated for similar CZTSSe TFSCs showed a linear increase and decrease in the open circuit voltage (Voc) and short circuit current density (Jsc) of the device with an increasing S/(S+Se) ratio. The external quantum efficiency (EQE) measured also exhibited a linear blue shift in absorption edge, increasing the bandgap from 1.056 eV to 1.228 eV, respectively.