• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1379-1381
• /
• 1998

Powder electroluminescent device (PELD) structured conventionally dielectric and phosphor layer, between electrode and their layer fabricated by screen printing splaying or spin coating method. To promote performance of PELDs, we approached the experiments for different structure and thickness variation of PELD. Thickness variation($30{\mu}m{\sim}130{\mu}m$) was taken. To investigate electrical and optical properties of PELDs, EL spectrum, transferred charge density using Sawyer-Tower's circuit brightness was measured. Variation of structure in PELDs was as follows: WK-1 (ITO/BaTiO3/ZnS:Cu/Silver paste), WK-2 (ITO/BaTiO3/ZnS:Cu/BaTiO3/ZnS:Silver paste), WK-3 (ITO/BaTiO3/ZnS:Cu/BaTiO3/Silver paste), WK-4(ITO/BaTiO3+ZnS:Cu/Silver paste) As a result, structure of the highest brightness appeared WK-4 possessed 60 ${\mu}m$ thickness. The brightness was 2719 cd/$m^2$ at 100V, 400Hz.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.31-36
• /
• 2003

In this study, nano-sized NiCuZn-ferrites for the multi-layered chip inductor application were prepared by a coprecipitation method and its electromagnetic properties were analyzed. Also, the property of low temperature sintering were studied with the initial heat treatment of powder.$(Ni_{0.4-x}Cu_xZn_{0.60})_{1+w}(Fe_2O_4)_{1-w}$ (x=0.2, w=0.03) were calcined at $300^{circ}C~750^{circ}C.$ The sintered NiCuZn-ferrites at $900^{\circ}C$ showed good apparent density $4.90g/cm^3,$ and magnetic properties of initial permeability 164 and quality factor 72. As the calcination temperature increase, the grain size of NiCuZn-ferrite increased with irregular grain distribution and its magnetic properties were deteriorated.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1131-1137
• /
• 1996

The dielectric properties and phase stabilities of Pb(Zn0.6Mg0.4)1/3Nb2/3O3 [PZMN]system were investigated into substitution of A-site with Ba, Sr and Ca ions. The A-site substitutions led to the complexity of components of perovskite phase and then DPT coefficient increased. The A-site substitutions of Ba or Sr ion perovskite single phase could be easily formed by columbite process due to increase of perovskite phase stability. The variation of lattice parameters in specimen obeyed Vegard's law and curie temperature and dielectric constant of specimen decreased linearly. But Ca substitution led to perovskite phae instability. The lattice parameter dielectric constant and curie temperature of specimens drasticaly decreased with formation of pyrochlore phase.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.637-643
• /
• 2003

In order to improve the photoluminescent properties and crystallinity, Zn$_2$SiO$_4$:Mn, M(M=Cr, Ti) phosphors were synthesized by the sol-gel method. The willemite single phase was obtained at 110$0^{\circ}C$, which is lower temperature than that of the conventional solid-state reaction (130$0^{\circ}C$). The characteristics of fired samples were obtained by a 147 nm excitation source under VUV (Vacuum Ultraviolet). To investigation the effect of co-dopant, the content of Mn and the ratio of $H_2O$ to TEOS was fixed as 2 ㏖% and 36. 1, respectively. The highest emission intensity was obtained when the concentration of Cr and Ti was 0.1 ㏖% relative to Zn$_2$SiO$_4$:Mn. While the emission intensity decrease continuously the decay time improved as increased the Cr concentration. In the case of Ti added samples, however, the emission intensity increase up to 2 ㏖％ concentration.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.34-37
• /
• 2007

The crystallographic and magnetic properties of $Fe_{0.9}Zn_{0.1}Cr_2S_4$ have been studied by X-ray diffractometer(XRD), vibrating sample magnetometer(VSM) and $M\"{o}ssbauer$ spectroscopy measurement. The crystal structure was determined by the normal cubic spinel of space group Fd3m and the lattice constant was $a_0=9.9967\;{\AA}$. The specific phenomenon which looks like cusp pattern at 77 K was observed in magnetization corves(ZFC : Zero Field Cooling) under 100 Oe applied field. $N\acute{e}el$ temperature($T_N$) was determined to be 153 K by VSM and $M\"{o}ssbauer$ spectra. The asymmetric 8-line profile has been observed at 4.2 K, which was attributed by the colossal electric quadupole interaction(${\Delta}E_Q$), ${\Delta}E_Q$ has 2.22 mm/s at 4.2 K. The ${\Delta}E_Q$ abruptly decreases around 77 K and then it disappears above 77 K with diminishing of 8-line pattern. The isomer shift $\delta$ at room temperature is 0.48 mm/s relative to Fe metal, which means that the charge state of Fe ions is ferrous in character.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1734-1740
• /
• 2001

Feeding trials using weanling pigs and broiler chicks were conducted to evaluate the efficacy of different metal-amino acid chelates and complexes at various levels of copper and zinc on the performance and fecal excretions. A total of 200 weanling pigs (Large White ${\times}$ Yorkshire ${\times}$ Duroc, $11.20{\pm}0.81kg$) were randomly assigned to 5 dietary treatments following a randomized complete block design. Each treatment was replicated 4 times with 10 pigs per pen. The dietary treatments were designated as : A-diet containing 170 ppm Cu from $CuSO_4$ and 120 ppm Zn from $ZnSO_4$, B-diet containing 85 ppm Cu from Cu-amino acid chelate (CAC) and 60 ppm Zn from Zn-amino acid chelate (ZAC), C-diet containing 170 ppm Cu from CAC and 120 ppm Zn from ZAC, D-diet containing 85 ppm Cu from Cu-lysine complex (CL) and 60 ppm Zn from Zn-methionine complex (ZM), and E-diet containing 170 ppm Cu from CL and 120 ppm Zn from ZM. On the other trial, 144 of one day old broiler chicks were randomly distributed to 6 dietary treatments following a completely randomized design. Each treatment was replicated 3 times with 8 chicks per replicate. The dietary treatments were as follows: 1-diet with 60 ppm Cu from $CuSO_4$ and 40 ppm Zn from $ZnSO_4$, 2-diet with 120 ppm Cu from $CuSO_4$ and 80 ppm Zn from $ZnSO_4$, 3-diet with 60 ppm Cu from CAC and 40 ppm Zn from ZAC, 4-diet with 120 ppm Cu from CAC and 80 ppm Zn from ZAC, 5-diet with 60 ppm Cu from CL and 40 ppm Zn from ZM, and 6-diet with 120 ppm Cu from CL and 80 ppm Zn from ZM. In Exp. 1 with pigs, there was no difference on average daily gain and average daily feed intake observed among treatments. There was improvement (p<0.05) on the overall feed conversion ratio (FCR) of pigs fed diet containing 120 ppm Zn and 170 ppm Cu from metal-amino acid chelates relative to those fed diet containing inorganic sources of Cu and Zn but equally efficient as those fed diet containing metal-amino acid complexes. Pigs fed diet containing either metal-amino acid chelates or complexes as sources of Cu and Zn had higher (p<0.05) Cu and Zn concentration in serum and lower (p<0.05) in feces than those receiving diet with inorganic sources. In Exp. 2 with broiler chicks, the overall FCR was not different among treatments. Higher (p<0.05) Cu and Zn concentration in serum was obtained from birds fed diet with 60 ppm Cu and 40 ppm Zn from metal-amino acid chelates compared to those fed diet with inorganic sources of Cu and Zn. Also, the feces collected from birds fed diet with either metal-amino acid chelates or complexes contained generally lower Cu and Zn than those birds fed diet with inorganic sources. The higher the dietary level of Cu and Zn the higher the Cu and Zn concentration in the feces. Based on the results, both metal-amino acid chelates and complexes of Cu and Zn at low levels (Zn 60 ppm, Cu 85 ppm for weanling pigs and Zn 40 ppm, Cu 60 ppm for broiler chicks) are not different from that of high levels of inorganic sources in maintaining growth performance and serum concentration. The fecal excretions for Cu and Zn were greatly reduced when organic sources were used.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.125-130
• /
• 2022

We describe the importance of zinc oxide nanoparticle (ZnO NP) concentration in the enhancement of electrical properties in a lead sulfide quantum dot (PbS QD)-based shortwave infrared (SWIR) photodetector. ZnO NPs were synthesized using the sol-gel method. The concentration of the ZnO NPs was controlled as 20, 30 and 40 mg/mL in this study. Note that the ZnO NPs layer is commonly used as an electron transport layer in PbS QDs SWIR photodetectors. The photo-to-dark ratio, which is an important parameter of a photodetector, was intensively examined to evaluate the electrical performance. The 20 mg/mL condition of ZnO NPs exhibited the highest photo-to-dark ratio value of 5 at -1 V, compared with 1.8 and 0.4 for 30 mg/mL and 40 mg/mL, respectively. This resulted because the electron mobility decreased when the concentration of ZnO NPs was higher than the optimized value. Based on our results, the concentration of ZnO NPs was observed to play an important role in the electrical performance of the PbS QDs SWIR photodetector.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.323-330
• /
• 2002

Various types of compounds were tested with the aspects of decomposition and formation of residue in a $CO_2$ or 7H$_2$+93$N_2$ atmosphere. The evaporation temperature range of each compound was determined from thermogravimetric curve. Decomposition of dicarbon amide, stearic acid, acrowax and zinc stearate was studied by thermogravimetry in $CO_2$ or in 7H$_2$+93$N_2$ atmosphere. All compounds were decomposed in $CO_2$ atmosphere at lower than 40$0^{\circ}C$, but the residue, ZnO remained for zinc stearate. ZnO did not decompose in $CO_2$ atmosphere up to 130$0^{\circ}C$, but reduced into Zn metal and disappeared in the temperature range of $600^{\circ}C$ to 120$0^{\circ}C$ in 7H$_2$+93$N_2$ atmosphere. The effect of residue, which trapped in closed pores of sintered pellet, on the thermal stability was studied using the resintering test at 1$700^{\circ}C$ in 7H$_2$+93$N_2$ atmosphere. In the case of oxidative sintered pellet with admixing zinc stearate, the cavity formation accompanied with a density drop after resintering is due to the pressure of the Zn gases trapped in the isolated pores.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.121-126
• /
• 2003

Tris(2-cyclohexylaminoethyl)amine (L) was synthesized by the Schiff base condensation reaction of tris(2-aminoethyl)amine with cyclohexanone, followed by reduction. The thermodynamic characteristics, mole ratio and formation constant of [Zn(II)-L] complex were measured by the cyclic voltammetry and isothermal titration. In the case of Zn(II), well-defined cathodic and anodic peak were obtained at -1.02V and -0.48V vs Ag/AgCl , respectively. For the [Zn(II)-L] complex, both peaks were obtained at -1.19V and -0.45V vs Ag/AgCl, respectively. In addition, the peak height gradually increases as the scan rate increases, suggesting that the currents obtained were diffusion - controlled. The mole ratio and stability constant of the complex measured cyclic voltammerty were 1:1 and logK$_f$= 5.8, respectively. And the mole ratio and stability constant of the complexe calculated by isothermal titration method was 1:1 and logK =5.4, respectively. ${\Delta}$H, ${\Delta}$G and T${\Delta}$S for the complex formation were -53.0 kJ/mol, -31.1 kJ/mol, and -21.9 J/K at 25 ${\circ}$C, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.541-544
• /
• 2002

In this study, a new LTCC material using $ZnWO_4$-LiF system was attempted with respect to use as a capacitor layer in Front-End Module. Pure $ZnWO_4$ must be sintered above $1050^{\circ}C$ in order to obtain up to 98% of full density. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 15.5, 74380GHz, and $-70ppm/^{\circ}C$, respectively. LiF addition resulted in an liquid phase formation at $810^{\circ}C$ due to interaction between $ZnWO_4$ and LiF. Therefore $ZnWO_4$ with 0.5~1.5wt% LiF could be densified at $850^{\circ}C$. Addition of LiF slightly lowered the dielectric constant from 15.5 to 14.2~15. In the given LiF addition range, the sintering shrinkage increased with increasing LiF content. $Q{\times}fo$ value, however, decreased with increasing LiF content(or increasing densification). This is originated from the interaction between the liquid phase and $ZnWO_4$ and inhomogeneity of grain morphology.