• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.3-9
• /
• 2000

This study concerns the distribution and dependence of moisture content(MC) in wood for same thickness in different vapor transmission conditions. The specimens were disks of 70-mm in diameter and 20-mm in thickness from quartersawn lumber of Korean red pine(Pinus densiflora S. et Z.). The experiments were conducted in ten different conditions on the difference of the vapor pressures by the JIS Z-0208. The distribution of moisture content in wood can be illustrated by two straight lines intersecting at the point of about ten percent Me. On the other hand, when more or less than about 10 percent, the distribution of the Me can be illustrated by one straight lines. Therefore, it is considered that the values of 10 percent Me has no relation to the wood and experimental conditions. It's assumed that 10 percent is the boundary point at which the moisture sorption energy changes. In a previous study, diffusion coefficient is almost constant with no relation to a thickness of the woods for the constant experimental conditions. But, in this study, it seems that diffusion coefficient from the moisture gradient vary with the Me of wood in different vapor transmission conditions.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.319-328
• /
• 2021

Purpose: Recently, a large social disaster has called for the need to diagnose social disaster safety, and the Ministry of Public Administration and Security calculates and publishes regional safety ratings such as regional safety index and national safety diagnosis every year. The existing safety diagnosis system uses equal intervals or normal distribution to grade risk maps in a uniform manner. Method: However, the equidistant technique can objectively analyze risk ratings, but there is a limit to classifying risk ratings when the distribution is skewed to one side, and the z-score technique has a problem of losing credibility if the population does not follow a normal distribution. Because the distribution of statistical data varies from indicator to indicator, the most appropriate rating should be applied for each data distribution. Result: Therefore, in this paper, we analyze the data of disaster indicators and present a comparison and suitable method for traditional equidistant and natural brake techniques to proceed with optimized grading for each indicator. Conclusion: As a result, three of the six new indicators were applied differently from conventional grading techniques

• Tunnel and Underground Space
• /
• v.26 no.6
• /
• pp.516-523
• /
• 2016

Roughness of a joint surface is one of the most important parameters that affects the mechanical and hydraulic behavior of rock mass. Therefore, various studies on making constitutive model and/or roughness quantification have been conducted in experimental and empirical manners. Advances in recent 3D printing technology can be utilized to generate a joint surface with a specific roughness. In this study, a reliable technique to generate a rough joint surface was introduced and its quantitative assessment was made. Random midpoint displacement method was applied to generate a joint surface and the distribution of $Z_2$ was investigated to assess its roughness. As a result, a certain roughness can be embodied by controlling input parameters and furthermore it was able to generate a joint surface with specific roughness anisotropy.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.269-279
• /
• 2000

This paper deals with the development of biomechanical model on a seat with backrest support in the vertical direction. Four kinds of biomechanical models are discussed to depict human motion. One DOF model mainly describes z-axis motion of hip, two and three DOF models describe z-axis of hip and head, and while nine DOF model suggested in this study represents more motion than the otehr model. Three kinds of experiments were executed to validate these models. The first one was to measure the acceleration of the floor and hip surface in z-axis, the back surface in x-axis, and the head in z-axis under exciter. From this measurement, the transmissiblities of each subject were obtained. The second one was the measurement of the joint position by the device having pointer and the measurement of contact position between the human body and the seat by body pressure distribution. The third one was the measurement of the seat and back cushion by dummy. The biomechanical model parameters were obtained by matching the simulated to the experimental transmissiblities at the hip, back, and head.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.400-401
• /
• 2011

본 논문에서는 단상 Quasi Z-source AC/AC converter 2대의 출력을 직렬로 연결하여 6.6[kV]/60[Hz]의 배전계통의 전압변동을 보상하는 시스템을 제안하였다. 제안된 시스템은 기존의 단상 Quasi Z-source AC/AC converter의 전압변동 보상기가 보상 못 하는 구간, 즉 배전계통에서 많이 발생하는 50[%] 미만의 전압 sag를 보상할 수 있는 장점이 있다. PSIM시뮬레이션에 의하여, 제안된 방법은 정상전압에 대하여 연속적으로 전압변동이 발생하여도 보상할 수 있었다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.2
• /
• pp.43-50
• /
• 2010

This study was carried out to evaluate the vertical stress properties in sandy soil according to changes of foundation condition in soil bin compacted three layers. The following conclusions and comparisons have been made based on careful analysis from theoretical and experimental methods. : When sandy soil subjected to circular uniform load, the vertical stress increments ($\Delta\sigma_z$) was increased as load increasing, the maximum values of $\Delta\sigma_z$ was achieved at the point loading axis, and $\Delta\sigma_z$ was not shown over at a distance of three times of loading plate width (B). The vertical stress increments were achieved largely at 80 % relative compaction (Rc) compared to 95 % relative compaction due to stress concentration in sandy soil. When sandy soil subjected to circular uniform load, the $\Delta\sigma_z$ differences between theoretical and experimental values as load increased were more increased and its maximum differences were achieved at stress axis. When gravel surface macadamized over sandy soil subjected to load, the $\Delta\sigma_z$ was concentrated to load axis as load increasing, so that macadamization will be decreased load transmission.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.37.1-37.1
• /
• 2018

ZwCL 1447.2+2619 is a merging galaxy cluster at z=0.37 with clear substructures in X-ray emission and galaxy distribution. In addition, the system possesses distinct radio relics. In order to constrain the merger scenario, it is necessary to measure both the distribution and mass of the cluster dark matter. We perform a weak lensing analysis of ZwCL 1447.2+2619 using Subaru imaging data. After carefully addressing instrumental systematics, we detect significant lensing signals. In this talk, our methodology, weak lensing results, and possible merging scenarios will be presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.67.2-67.2
• /
• 2016

SPT-CL J2106-5844 is known to be one of the most massive galaxy clusters ($M_{200}{\sim}1.27{\times}10^{15}M_{sun}$) ever found at z > 1. Given its redshift (z ~ 1.132), the mass of this cluster estimated by Sunyaev-Zel'dovich effect and X-ray observation is too large compared with the current ${\Lambda}CDM$ cosmology prediction. Mass estimation from these methods can be biased because they require assumptions on hydrostatic equilibrium, which are not guaranteed to hold at such high redshift (about 40% of the current age of the Universe). Thus, we need to verify the mass of this interesting cluster using gravitational lensing, which does not require such assumptions. In this work, we present our preliminary result of dark matter mass and its spatial mass distribution of SPT-CL J2106-5844 using weak-lensing analysis based on HST optical/NIR deep imaging data. We compare mass estimates from different sources and discuss cosmological implications.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.131-136
• /
• 1996

An analytic nodal expansion method has been derived for the multigroup neutron diffusion equation in 2-D cylindrical(R-Z) coordinate. In this method we used the second order Legendre polynomials for source, and transverse leakage, and then the diffusion eqaution was solved analytically. This formalism has been applied to 2-D LWR model. $textsc{k}$$_{eff}$, power distribution, and computing time have been compared with those of ADEP code(finite difference method). The benchmark showed that the analytic nodal expansion method in R-Z coordinate has good accuracy and quite faster than the finite difference method. This is another merit of using R-Z coordinate in that the transverse integration over surfaces is better than the linear integration over length. This makes the discontinuity factor useless.s.

• Weed & Turfgrass Science
• /
• v.6 no.4
• /
• pp.283-291
• /
• 2017

Zoysiagrass has been used in Korea as a native grass. Informations on distributions, classifications, breeding efforts and outputs, current production and uses of zoysiagrasses in Korea are summarized. During past a few decades, collection of naturally growing zoysiagrass ecotypes has been continued, followed by evaluation, selection and cross-pollination. Classification efforts using important morphological, biochemical traits and DNA polymorphisms resulted in the several suggestions of grouping zoysiagrass species and varieties. Zoysia japonica consistently form separate group, while Zoysia sinica and Zoysia macrostackya have been separately or inter-mixed. Z. matrella with some variations frequently grouped separately but with some similarity with Z. tenuifolia, which was recently renamed as Z. pacifica. Hybrid types of zoysiagrasses were frequently found in Korea. New varieties such as 'Kunhee' and 'Green Ever' etc. were bred by ecotype selections, while 'Senock', 'Semil', 'Millock' were bred through pollination. Molecular approaches were also used to introduce beneficial genes into zoysiagrasses with no practical outputs by legal regulations. Currently popular varieties are inter-specific hybrid types such as 'Anyang' and other local zoysiagrasses as well as common zoysiagrass (Zoysia japonica) Production area in Korea was estimated as 2,947 ha with increasing problems of mixed or contaminated species and varieties.