• Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.34-44
• /
• 2017

Background: Monitoring terrestrial vegetation cover condition is important to evaluate its current condition and to identify potential vulnerabilities. Due to simplicity and low cost, point intercept method has been widely used in evaluating grassland surface and quantifying cover conditions. Field-based digital photography method is gaining popularity for the purpose of cover estimate, as it can reduce field time and enable additional analysis in the future. However, the caveats and uncertainty among field-based vegetation cover estimation methods is not well known, especially across a wide range of cover conditions. We compared cover estimates from point intercept and digital photography methods with varying sampling intensities (25, 49, and 100 points within an image), across 61 transects in typical steppe, forest steppe, and desert steppe in central Mongolia. We classified three photosynthetic groups of cover important to grassland ecosystem functioning: photosynthetic vegetation, non-photosynthetic vegetation, and bare soil. We also acquired normalized difference vegetation index from satellite image comparison with the field-based cover. Results: Photosynthetic vegetation estimates by point intercept method were correlated with normalized difference vegetation index, with improvement when non-photosynthetic vegetation was combined. For digital photography method, photosynthetic and non-photosynthetic vegetation estimates showed no correlation with normalized difference vegetation index, but combining of both showed moderate and significant correlation, which slightly increased with greater sampling intensity. Conclusions: Results imply that varying greenness is playing an important role in classification accuracy confusion. We suggest adopting measures to reduce observer bias and better distinguishing greenness levels in combination with multispectral indices to improve estimates on dry matter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.401-408
• /
• 2001

This paper shows the design, fabrication and performance analysis of VCO which plays a major role in 5.8 GHz RF module for ITS. The design specifications of the VCO are determined on the basis of 5.8 GHz RF modul performance requirements. The design parameters are optimized through ADS simulation tool. The operating characteristic and performance analysis of the implemented VCO based on the design parameters are accomplished. The frequency variations according to the voltage change(0 ~5 V) of varactor diode are from 5.42 GHz to 5.518 GHz and the power level is 6.5 dBm. The second harmonic suppression are -21.5 dBc at 5.51 GHz and the phase noise characteristics are -83.81 dBc at 10 kHz offset frequency. The implemented VCO is available to not only DSRC and also, 5.8 GHz other systems.

• Archives of Craniofacial Surgery
• /
• v.18 no.3
• /
• pp.166-171
• /
• 2017

Background: Localized scleroderma is characterized by a thickening of the skin from excessive collagen deposits. It is not a fatal disease, but quality of life can be adversely affected due to changes in skin appearance, joint contractures, and, rarely, serious deformities of the face and extremities. We present six cases of localized scleroderma in face from our surgical practice. Methods: We reviewed six localized scleroderma cases that were initially treated with medication and then received follow-up surgery between April 2003 and February 2015. Six patients had facial lesions. These cases presented with linear dermal sclerosis on the forehead, oval subcutaneous and dermal depression in the cheek. Results: En coup de sabre (n=4), and oval-shaped lesion of the face (n=2) were successfully treated. Surgical methods included resection with or without Z-plasty (n=3), fat graft (n=1), dermofat graft (n=1), and adipofascial free flap (n=1). Deformities of the affected parts were surgically corrected without reoccurrence. Conclusion: We retrospectively reviewed six cases of localized scleroderma that were successfully treated with surgery. And we propose an algorithm for selecting the best surgical approach for individual localized scleroderma cases. Although our cases were limited in number and long-term follow-up will be necessary, we suggest that surgical management should be considered as an option for treating scleroderma patients.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.35.1-35.1
• /
• 2016

Nearby galaxy clusters and their surrounding regions represent the current endpoint of evolution galaxy cluster evolution. We present a new catalog of 1589 galaxies, what we call Extended Virgo Cluster Catalog (EVCC), in wider area of the Virgo cluster based on the Sloan Digital Sky Survey (SDSS) Data Release 7. The EVCC covers an area 5.2 times larger than the footprint of the classical Virgo Cluster Catalog, and reaches out to 3.5 times the virial radius of the Virgo cluster. The EVCC contains fundamental information such as membership, morphology, and photometric parameters of galaxies. The EVCC defines a comprehensive galaxy sample covering a wider range in galaxy density that is significantly different from the inner region of the Virgo cluster. It will be the foundation for forthcoming galaxy evolution studies in the extended Virgo cluster region, complementing ongoing and planned Virgo cluster surveys at various wavelengths. We also present the large scale structures in the field around the Virgo cluster. We identified seven galaxy filaments and one possible sheet in three dimensions of super-galactic coordinates based on the HyperLEDA database. By examining spatial distribution and Hubble diagram of galaxies, we found that six filaments are directly associated with the main body of the Virgo cluster. On the other hand, one filament and one sheet are structures located at background of the main body of Virgo cluster. The EVCC and the filament structures will be the foundation for forthcoming studies of galaxy evolution in various environments as well as buildup of the galaxy cluster at z ~ 0, complementing ongoing and planned Virgo cluster surveys at various wavelengths.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.41.1-41.1
• /
• 2014

Although the link between activity in the nuclei of galaxy and galactic mergers has been under scrutiny for several years, it is still unclear to what extent and for which populations of active galaxies merger-triggered activity is relevant. The environment of AGN allows an indirect probe of the past merger history and future merger probability of these systems, suffering less from sensitivity issues while extending to higher redshifts, compared to traditional morphological studies of AGN host galaxies. Here we present results from our investigation of the environment of radio selected sources out to redshift z=2. We employ the first data release J-band catalog from the new near-IR Infrared Medium-Deep Survey (IMS) and 1.4 GHz radio data from the Faint Images of the Radio Sky at Twenty-cm (FIRST) survey and a deep dedicated VLA survey of the VIMOS field, covering a combined total of ~20 sq. degrees. Given the flux limit of the combined radio catalog (0.1 mJy), we probe a radio luminosity range of 10^36-10^44 erg/s. Using the second and fifth closest neighbor density parameters, we test whether active galaxies inhabit denser environments and study these overdensities in terms of both distance to the AGN and its luminosity. We find evidence for a sub-population of radio-selected AGN that resides in significantly overdense environments at small scales, although we do not find significant overdensities for the bulk of our sample. We do not recover any dependence between the AGN radio-luminosity and overdensities. We show that radio-AGN inhabiting the most underdense environments in the field have vigorous ongoing star formation. We interpret these results in terms of the triggering and fuelling mechanism of radio-AGN.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.11-18
• /
• 2002

Compomer, like resin composite, undergoes shrinkage during setting. But, due to the structure of glass ionomers and their hydrophilic nature, water sorption and subsequent expansion may lead to compensation of the shrinkage. The purpose of this study was to, evaluate the change of mliroleakage after 30day-water-storage of compomer and composite resin. 40 sound third molars were used for the microleakage test. Z-100 resin was used for the control groups(Group I and III), Dyract AP for the experimental groups(Group II and IV). The storage time was 1 day in Group I, II and 30days in Group III, IV. The result from the this study can be summarized as follows; 1. No significant difference could be found in microleakage of occlusal margin between each group(p>0.05). 2. In microleakage of gingival margin, no significant difference could be found between group I and II, and between group I and III (p>0.05). 3. Group IV was showed less microleakage than group II and group III in gingival margin(p<0.05).

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.642-650
• /
• 2016

One of the most feasible solution for reducing the excessive energy consumption and carbon dioxide emission is usage of more efficient fuel such as hydrogen. As is well known, there are three viable technologies for storing hydrogen fuel: compressed gas, metal hydride absorption, and cryogenic liquid. In these technologies, the storage for liquid hydrogen has better energy density by weight than other storage methods. However, the cryogenic liquid storage has a significant disadvantage of boiling losses. That is, high performance of thermal insulation systems must be studied for reducing the boiling losses. This paper presents an experimental study on the effective thermal conductivities of the composite layered insulation with aerogel blankets($Cryogel^{(R)}$ Z and $Pyrogel^{(R)}$ XT-E) and Multi-layer insulation(MLI). The aerogel blankets are known as high porous materials and the good insulators within a soft vacuum range($10^{-3}{\sim}1$ Torr). Also, MLI is known as the best insulator within a high vacuum range(<$10^{-6}{\sim}10^{-3}$ Torr). A vertical axial cryogenic experimental apparatus was designed to investigate the thermal performance of the composite layered insulators under cryogenic conditions as well as consist of a cold mass tank, a heat absorber, annular vacuum space, and an insulators space. The composite insulators were laminated in the insulator space that height was 50 mm. In this study, the effective thermal conductivities of the materials were evaluated by measuring boil-off rate of liquid nitrogen and liquid argon in the cold mass tank.

• BMB Reports
• /
• v.33 no.6
• /
• pp.483-492
• /
• 2000

The Herpes simplex virus type 1 (HSV-1) strain F glycoprotein H (gH) gene in the pHLB-4 plasmid was recombinated into a baculovirus expression vector (lacZ-HcNPV) to construct a recombinant virus GH-HcNPV expressing gH. The sequences of gH and its expression were analyzed. The gH gene was located in the 6.41 kb BglII fragment. The open reading frame (ORF) of the gH gene was 2,517 bp and codes 838 amino acid residues. Insect cells infected with this recombinant virus synthesized a high level of the matured and gX-gH fusion protein with approximately 112 kDa. The fusion gH protein was localized on the membrane of the insect cells as seen by using immunofluorescence assay and accumulated in the cultured media by the SDS-PAGE and immunoprecipitation assays. The amino acid sequence presents additional characteristics compatible with the structure of a viral glycoprotein: signal peptide, putative glycosylation sites and a long C-terminal transmembrane sequence. Antibodies raised in mice to this recombinant protein recognized viral gH and neutralized the infectivity of HSV-1 in vitro. These results demonstrate that it is possible to produce a mature protein by gene transfer in eukaryotic cells, and indicate the utility of the HcNPV-insect cell system for producing and characterizing eukaryotic proteins. Furthermore, the neutralizing antibodies would appear to protect mice against HSV; accordingly, this particular recombinant protein may be useful in the development of a subunit vaccine.

• Fashion & Textile Research Journal
• /
• v.5 no.3
• /
• pp.299-303
• /
• 2003

Some of historical textiles were analyzed to identify the imprinted textures on the metal remains of Haengyeup(a horse strap pendant) and Doja (a knife), which were excavated in the ruins of Hwangsung-dong, Kyungju city in the fifth century and textiles imprinted on the human bones that were excavated in the Pungnae 4th Area, Namyangju county in the sixteenth century. The results analyzed arc as follows ; It was confirmed that the imprinted textures of Haengyeup and Doja are white ramie since the structural characteristics of cellulosic bast fibers, partially projected long oval cross sections with large lumens and the imprinted textures of human bones are silk fabrics since the triangular cross sections of fibroin is showed. All of the textiles were designed in plain weaves. In the case of weaving yarns, the warp threads were thicker than the weft threads, that is, the imprinted textures of Haengyeup were measured by 1.35 mm for warp and 1.21 mm for weft, and the Doja by 1.16mm for warp and 1.11 mm for weft. In connection with the direction of the yarn twist, the Z-twist were observed in the imprinted textures of human bones, whereas it presented the S-twist in the case of Haengyeup and Doja. The warp yarns were mostly harder twisted than the weft yarns on the amounts of twist, that is, it was observed that the case of Haengyeup were amounted to 0.33 twists per centimeter for warp yarns and 0.25 twists per centimeter for weft yarns. Also it was showed 0.32 twists per centimeter for warp yarns and 0.26 twists per centimeter in the case of the textures of human bones. On the fabric counts, it was showed that the finer the yarns the higher the densities since it were $4.3{\times}5.1$ threads per sqaure centimeters and $7.6{\times}7.1$ threads per sqaure centimeters each in the case of Haengyeup and Doja, whereas it was $18.2{\times}33.7$ threads per sqaure centimeters in the case of the textures of human bones.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1050-1056
• /
• 2015

In this paper, we use the characteristics of electromagnetic waves underwater attenuation for estimating linear distance between a transmitting node and receiving node, and research underwater vertical plane attenuation model for constructing the underwater localization system. The underwater localization of 2 dimensional with the plane attenuation model in the horizontal plane (H-plane) was proposed previous research. But for the 3 dimensional underwater localization, the additional vertical plane (E-plane) model should be considered. Because the horizontal plane of omnidirectional antenna has the same attenuation tendency in x-y plane according to the distance, whereas in vertical plane shows an irregular pattern in x-z plane. For that reason, in the vertical plane environment, the attenuation should be changed by the position and inclination. Hence, in this paper the distance and angle between transmitting and receiving node are defined using spherical coordinate system and derive an antenna gain pattern using half power beam width (HPBW). The HPBW is called a term which defines antenna's performance between isotropic and other antennas. This paper derives omnidirectional antenna's maximum gain and attenuation pattern model and define vertical plane's gain pattern model using HPBW. Finally, experimental verifications for the proposed underwater vertical plane's attenuation model was executed.