• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• ALGAE
• /
• v.36 no.1
• /
• pp.1-12
• /
• 2021

As the global demand for the carrageenophyte Kappaphycus is steadily increasing, its overall productivity, carrageenan quality, and disease resistance are gradually declining. In the face of this dilemma, wild Kappaphycus populations are viewed as sources of new cultivars that could potentially enhance production; therefore, assessment of their diversity is crucial. This study highlights the morphological and genetic diversity of wild Kappaphycus species obtained from two sites in the Philippines. Nucleotide alignments of available 5' region of the mitochondrial cytochrome c oxidase subunit I (COI-5P) and cox2-3 spacer sequences of Kappaphycus confirmed the presence of K. alvarezii in Guiuan, Eastern Samar and K. striatus in Bolinao, Pangasinan. Based on the concatenated sequences of the COI-5P and the cox2-3 spacer, nine novel haplotypes were observed along with other published haplotypes. However, there was no relationship between haplotype and morphology. These newly recognized haplotypes indicate a reservoir of unutilized wild genotypes in the Philippines, which could be taken advantage of in developing new cultivars with superior traits. DNA barcodes generated from this study effectively expand the existing databank of Kappaphycus sequences and can provide insights in elucidating the genetic diversity of Kappaphycus species in the country.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.4
• /
• pp.249-256
• /
• 2021

Objectives: The purpose of this study was to evaluate the postoperative anteroposterior stability and improvements in facial asymmetry after performing LeFort I osteotomy in the maxilla, sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO) in the mandible, and lateral corticectomy on the IVRO side. Materials and Methods: From July 2009 to October 2018, a retrospective analysis was performed on 11 subjects. Lateral cephalometric radiograph was performed preoperatively (T0), postoperatively (T1), and at 12 months of follow-up (T2), and the B point distance was measured. Posteroanterior cephalometric radiograph was performed preoperatively (S0) and at 12 months of follow-up (S1) and was used to measure five indicators (Ag angle, M-Ag, Co-Ag, Co-Me, and Ag-Me) of facial asymmetry. Results: The B point distances for T0 and T1 were significantly different (P=0.007), whereas those for T1 and T2 were not significantly different (P=0.1). In addition, there was a significant difference between the B point distances of T2 and T0 (P=0.026). Comparison of the facial asymmetry indicators before and after surgery showed a significant difference for all indicators between S0 and S1: the P-values of Ag angle, M-Ag, Co-Ag, Co-Me, and Ag-Me were 0.003, 0.003, 0.008, 0.006, and 0.004, respectively. The Z value was based on negative ranks. Conclusion: There was no significant difference in the B point distances from postoperation to the 12-month follow-up. However, there were significant differences in all five indicators related to facial asymmetry before and after surgery. The values for the five indicators of facial asymmetry all increased postoperatively.

• Journal of Forest and Environmental Science
• /
• v.38 no.1
• /
• pp.48-54
• /
• 2022

This study was conducted to examine litter inputs and litter decomposition rates following thinning, which is among the most important forest management activities that enhance the beneficial functions in Korean forests. Litter inputs and litter decomposition rates following a 2-year elapse from thinning in Pinus densiflora and following a 7-year elapse from thinning in Quercus variabilis stands were measured for 2 years from 16 sites in three regions (Sancheong-gun, Uiryeong-gun, and Jinju-si) in Gyeongsangnam-do, Korea. Annual needle litter inputs in P. densiflora stands were significantly decreased following thinning, whereas annual broadleaved leaf litter inputs in Q. variabilis stands were not significantly different between thinned and unthinned treatments. The annual mean total litter inputs in both tree species were significantly lower in the thinned (P. densiflora: 3,653 kg ha^-1 year^-1; Q. variabilis: 4,963 kg ha^-1 year^-1) compared to the unthinned stands (P. densiflora: 5,138 kg ha^-1 year^-1; Q. variabilis: 5,997 kg ha^-1 year^-1) during the study period. The mass loss rates from decomposing needle litter in P. densiflora stands were significantly lower (p<0.05) in the thinned stands than in the unthinned stands for two sampling dates of the eight included in the study, whereas the decomposition rates from decomposing leaf litter in Q. variabilis stands were not affected by thinning. The results indicate that thinning effects on total litter inputs remained clear following a 2-year elapse from thinning in P. densiflora stands and following a 7-year elapse from thinning in Q. variabilis stands.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.3
• /
• pp.328-337
• /
• 2022

This study investigated the removal performance of a foam fractionator under seawater conditions. The foam fractionator was tested using a 3×3×3 factorial design for operating conditions by combining different solids concentrations (SS; 1, 5, and 10 mg·L^-1), surface air velocities (SAV; 1.1, 1.5, and 2.1 cm·sec^-1), and hydraulic residence times (HRT; 1, 3, and 6 min) at 16℃. Performance parameters such as daily solids removal rate and efficiency were measured, and a multi-regression model equation was developed accordingly. The daily solids removal rate and removal efficiency varied with the experimental conditions and ranged from 0.14-2.33 g-solids·m^-3-air·day^-1 and 8.9-96.7 %, respectively. Overall, the daily solids removal rate increased with increasing SS and SAV and decreasing HRT, whereas the removal efficiency increased with increasing SAV and HRT and decreasing SS. The daily solids removal rate (g-solids·m^-3-air·day^-1) of the foam fractionator for SAV (cm·sec^-1), SS (mg·L^-1) and HRT (min) were described by the following multi-regression model: Daily solids removal rate [f(z)]=-0.118+0.422SAV+0.094HRT+0.141SS (r²=0.873).

• The Journal of Korean Academic Society of Nursing Education
• /
• v.28 no.2
• /
• pp.193-203
• /
• 2022

Purpose: This study explored the mediating role of resilience between post-traumatic stress and emotional exhaustion in nurses during the COVID-19 pandemic. Methods: The data were collected from 193 nurses working at a hospital in Daegu from October 16 to 30, 2020, in the middle of the COVID-19 pandemic. Participants conducted self-reported surveys of post-traumatic stress (Impact of Event Scale-Revised Korean version), emotional exhaustion (Maslach Burnout Inventory), and resilience (Korean Resilience Quotient Test). The data were analyzed using descriptive statistics, frequency, t-tests, Mann-Whitney U tests, Kruskal-Wallis tests, Pearson correlation coefficients, and multiple regression. Mediation analysis was performed using the Baron and Kenny method and Sobel test. Results: The mean scores for post-traumatic stress, resilience, and emotional exhaustion were 16.18±16.18, 183.41±18.29, and 32.64±9.66, respectively. A higher level of post-traumatic stress was associated with lower resilience (r=-.20, p=.004) and with higher emotional exhaustion (r=.33, p<.001). A higher level of resilience was associated with lower emotional exhaustion (r=-.35, p<.001). The resilience was confirmed to have a partial mediating effect in the relationship between post-traumatic stress and emotional exhaustion, verified by the Sobel test (Z=2.31, p=.02). Conclusion: Resilience had a partial mediating effect in the relationship between post-traumatic stress and emotional exhaustion. Thus, nurses should develop individual strengths to reduce emotional exhaustion, and managers should also make efforts to increase the nurses' resilience. It is also necessary to develop and apply a program to strengthen nurses' resilience.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3855-3863
• /
• 2022

An evaluation of the radiation shielding performance of high-Z-particle-loaded polylactic acid (PLA) composite materials was pursued. Specimens were produced via fused deposition modeling (FDM) using copper-PLA, steel-PLA, and BaSO₄-PLA composite filaments containing 82.7, 75.2, and 44.6 wt% particulate phase contents, respectively, and were tested under broad-band flash x-ray conditions at the Sandia National Laboratories HERMES III facility. The experimental results for the mass attenuation coefficients of the composites were found to be in good agreement with GEANT4 simulations carried out using the same exposure conditions and an atomistic mixture as a model for the composite materials. Further simulation studies, focusing on the Cu-PLA composite system, were used to explore a shield design parameter space (in this case, defined by Cu-particle loading and shield areal density) to assess performance under both high-energy photon and electron fluxes over an incident energy range of 0.5-15 MeV. Based on these results, a method is proposed that can assist in the visualization and isolation of shield parameter coordinate sets that optimize performance under targeted radiation characteristics (type, energy). For electron flux shielding, an empirical relationship was found between areal density (AD), electron energy (E), composition and performance. In cases where ${\frac{E}{AD}}{\geq}2MeV{\bullet}cm{\bullet}g^{-1}$, a shield composed of >85 wt% Cu results in optimal performance. In contrast, a shield composed of <10 wt% Cu is anticipated to perform best against electron irradiation when ${\frac{E}{AD}}<2MeV{\bullet}cm{\bullet}g^{-1}$.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.65-74
• /
• 2021

Serine proteases are the most versatile proteolytic enzymes with tremendous applications in various industrial processes. This study was designed to investigate the biochemical properties, critical residues, and the catalytic potential of alkaline serine protease using in-silico approaches. The primary sequence was analyzed using ProtParam, SignalP, and Phyre2 tools to investigate biochemical properties, signal peptide, and secondary structure, respectively. The three-dimensional structure of the enzyme was modeled using the MODELLER program present in Discovery Studio followed by Molecular Dynamics simulation using GROMACS 5.0.7 package with CHARMM36m force field. The proteolytic potential was measured by performing docking with casein- and keratin-enriched residues, while the effect of the inhibitor was studied using phenylmethylsulfonyl fluoride, (PMSF) applying GOLDv5.2.2. Molecular weight, instability index, aliphatic index, and isoelectric point for serine protease were 39.53 kDa, 27.79, 82.20 and 8.91, respectively. The best model was selected based on the lowest MOLPDF score (1382.82) and DOPE score (-29984.07). The analysis using ProSA-web revealed a Z-score of -9.7, whereas 88.86% of the residues occupied the most favored region in the Ramachandran plot. Ser327, Asp138, Asn261, and Thr326 were found as critical residues involved in ligand binding and execution of biocatalysis. Our findings suggest that bioengineering of these critical residues may enhance the catalytic potential of this enzyme.

• Steel and Composite Structures
• /
• v.44 no.1
• /
• pp.65-79
• /
• 2022

The main goal of this paper is to study the vibration of damaged core laminated annular plates with FG face sheets based on a three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. In this study the effect of microcracks on the vibrational characteristic of the sandwich plate is considered. In particular, the structures are made by an isotropic core that undergoes a progressive uniform damage, which is modeled as a decay of the mechanical properties expressed in terms of engineering constants. These defects are uniformly distributed and affect the central layer of the plates independently from the direction, this phenomenon is known as "isotropic damage" and it is fully described by a scalar parameter. Three complicated equations of motion for the sectorial plates under consideration are semi-analytically solved by using 2-D differential quadrature method. Using the 2-D differential quadrature method in the r- and z-directions, allows one to deal with sandwich annular plate with arbitrary thickness distribution of material properties and also to implement the effects of different boundary conditions of the structure efficiently and in an exact manner. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. The sandwich annular plate is assumed to have any arbitrary boundary conditions at the circular edges including simply supported, clamped and, free. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution, and boundary conditions.

• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.351-359
• /
• 2022

The present study investigated the synergistic effects of carbon nanotube (CNT) and carbon black (CB) inclusions on the piezoresistive sensing behaviors of cementitious composites. Four different CNT and CB combinations were considered to form different conductive networks in the binder material composed of Portland cement and fly ash. The cement was substituted with fly ash at levels of 0 or 50% by the mass of binder. The specimens were cured up to 100 days to observe the variations of the electrical characteristics with hydration progress, and the piezoresistive sensing behaviors of the specimens were measured under cyclic loading tests. The fabricated specimens were additionally evaluated with flowability, resistivity and cyclic loading tests, and morphological analysis. The scanning electron microscopy and energy disperse X-ray spectroscopy test results indicated that CNT and CB inclusion induced synergistic formations of electrically conductive networks, which led to an improvement of piezoresistive sensing behaviors. Moreover, the incorporation of fly ash having Fe³⁺ components decreased the electrical resistivity, improving both the linearity of fractional changes in the electrical resistivity and reproducibility expressed as R² under cyclic loading conditions.