• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.54-61
• /
• 2015

In this study, effect of laser power on hardness and microstructure of SKD61 Hot Die steel of which surface was melted and hardened with Yb:YAG disk laser was investigated. Beam speed was fixed at 70 mm/sec and distance between them was 0.8 mm about Laser surface melting. The only thing that was changed laser power. Laser powers were 2.0, 2.4 and 2.8 kW. No defect was found under all conditions. As the laser power increased, the penetration depth were deepened and the bead width was also widened. There was no hardness deviation of fusion zone at same laser power and it was higher than that of heat affected zone. In addition, the more laser power increased, the more hardness in fusion zone decreased. Fusion zone was macroscopically dendrite structure. However, core matric in dendrite was lath martensite of 100 nm size. There were $M_{23}C_6$ of 500 nm and the VC and $Mo_2C$ of a nano meters on boundary of dendrite.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.175.2-175
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.184.2-184
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.133-133
• /
• 1997

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.29.1-29
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.36.1-36
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1115-1116
• /
• 2012

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.741-746
• /
• 2019

New triple tungstate phosphors NaPbLa(WO₄)₃:Yb³⁺/Ho³⁺ (x = Yb³⁺/Ho³⁺ = 7, 8, 9, 10) are successfully fabricated by microwave assisted sol-gel synthesis and their structural and frequency upconversion (UC) characteristics are investigated. The compounds crystallized in the tetragonal space group I4₁/a and the NaPbLa(WO₄)₃ host have unit cell parameters a = 5.3927(1) and c = 11.7961(3) Å, V = 343.05(2) ų, Z = 4. Under excitation at 980 nm, the phosphors have yellowish green emissions, which are derived from the intense ⁵S₂/⁵F₄→⁵I₈ transitions of Ho³⁺ ions in the green spectral range and strong ⁵F₅→⁵I₈ transitions in the red spectral range. The optimal Yb³⁺:Ho³⁺ ratio is revealed to be x = 9, which is attributed to the quenching effect of Ho³⁺ ions, as indicated by the composition dependence. The UC characteristics are evaluated in detail under consideration of the pump power dependence and Commission Internationale de L'Eclairage chromaticity. The spectroscopic features of Raman spectra are discussed in terms of the superposition of Ho³⁺ luminescence and vibrational lines. The possibility of controlling the spectral distribution of UC luminescence by the chemical content of tungstate hosts is demonstrated.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.142-147
• /
• 2020

In this paper, we report highly efficient second harmonic generation of continuous-wave Yb fiber lasers incorporating a periodically poled LiTaO₃ device (MgO:PPSLT) as a frequency converter. The seed laser output from a Yb fiber master oscillator using a Fabry-Perot feedback cavity was amplified in a Yb fiber amplifier stage, yielding 28.5 W of linearly polarized output at 1064 nm in a beam with beam quality, M², of ~1.07. Second harmonic generation was achieved by passing the laser beam through MgO:PPSLT. Under optimized conditions, we obtained 11.1 W of green laser output at 532 nm for an incident signal power of 25.0 W at 1064 nm, corresponding to a conversion efficiency of 44.4%. The detailed investigation to find the optimized operating conditions and prospects for further improvement are discussed.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.501-508
• /
• 1998

An alkalophilic mi.croorganism (strain YB380), which produces yeast cell wall hydrolase extracellulary, was isolated from Korean soil. The rod-shaped cells were 0.3~0.4 by 2~4${\mu}{\textrm}{m}$ long, motile, aerobic, gram-positive, and spore-forming. The color of the colony was light yellow. The temperature range for growth at pH 9.0 was 25 to $45{\circ}C, with optimum growth at $35{\circ}C. The pH range for growth at $35{\circ}C was 8 to 11 with an optimum pH of 9.0. Therefore, the strain YB380 is an obligate alkalophile. The 16S rRNA of strain YB380 has a 99% sequence similarity with that of Bacillus alcalophilus. On the basis of physiological properties, cell wall fatty acid composition, and phylogenetic analysis, we propose that the isolated strain is Bacillus alcalophilus. The yeast cell wall hydrolase from Bacillus alcalophilus subsp. YB380 has been purified and partially characterized. The molecular weight was estimated to be 27,000 daltons with an optimum temperature and pH of $60{\circ}C and 9.0, respectively. The N-terminal amino acid sequence of the enzyme was analyzed as Gln- Thr- Val- Pro- Trp- Gly- Ile- Asn- Arg- Val.