• 한국자기학회지
• /
• 제5권5호
• /
• pp.556-560
• /
• 1995

The absorption properties of Cu-Zn ferrite/rubber composite microwave absorbers with PZT(Lead Zirconate Titanate) additive were evaluated. The composite specimens have prepared by molding and curing the mixture of matrix rubber and Cu-Zn ferrite powders which are synthesized by the coprecipitation method using Fe Cl/sub 3/ .center dot. 6H/sub 2/O, CuCl/sub 2/ .center dot. 2H/sub 2/O and Zn Cl/sub 2/ as a starting raw materials. PZT is used as another filler particles to adjust the material constants of Cu-Zn ferrite/rubber composite specimens. We have found that the material constants of specimens could be controlled by various PZT mixing ratio. On the Cu-Zn ferrite/rubber composite specimens with PZT 10[wt%] additive, the reflection losses were larger than 30[dB] in the frequency range from 2.72 to 4.4[GHz]' by adjusing the thickness.

• 공학논문집
• /
• 제2권1호
• /
• pp.139-145
• /
• 1997

촉매연소용 촉매담체인 $\gamma$-$Al_2O_3$의 열안정화에 미치는 Ba의 첨가 효과에 대하여 연구하였다. Ba의 첨가는 $Ba(No_3)_3$.$6H_2O$를 $\gamma$-$Al_2O_3$ 분말에 wet impergnation시키는 방법으로 행하였다. Ba는 $\gamma$-$Al_2O_3$의 소결을 억제함으로써 $\gamma$-$Al_2O_3$의 열안정화에 효과적인 첨가제임을 확인하였으며 최적의 첨가량은 전체 열처리 조건에서 5 mol%임을 알 수 있었다. 이러한 Ba첨가에 의한 열안정화 효과는 이온반경이 큰 $Ba^{2+}$이온이 $\Al^{3+}$이온의 자리에 치환하여 $\Al^{3+}$이온의 표면 확산을 억제하는 효과에서 기인하는 것으로 사료된다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1012-1016
• /
• 2008

[ $TiO_2-V_2O_5$ ] sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mole, 0.03mole, 0.05mole into $TiO_2$ sol. As a results of crystalline properties, $V_2O_5$ peaks were not found in spite of $V_2O_5$ additive. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping. Capacitance of thin films increased with increasing heat treatment temperature and it increased largest at $700^{\circ}C$. Capacitance of thin films decreased with increasing $V_2O_5$ additive and it increased largest at 0.01mole. Because adsorption time and desorption time of thin films was about 2 minutes 40 seconds and about 3 minutes 40 seconds respectively, adsorption time was faster about 1 minutes than desorption time.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.169-172
• /
• 2006

In the present work, silicon nitride was fabricated with $Y_3Al_5O_{12}$ as sintering additive and its mechanical properties were investigated. Silicon nitride with 3, 5, 7wt% of $Y_3Al_5O_{12}$ was prepared and sintered by a Hot Pressing (HP) technique at 1750, $1800^{\circ}C$ for 2 hours. The Process was fulfilled under different process pressures of 30, 45MPa respectively. Mechanical properties (density, strength, hardness, fracture toughness) were investigated as a function of $Y_3Al_5O_{12}$ contents in $Si_3N_4$. $Si_3N_4-Y_3Al_5O_{12}$ ceramics showed similar mechanical properties compared with $Si_3N_4-Y_2O_3-Al_2O_3$ ceramics. But its high temperature strength was higher than $Si_3N_4-Y_2O_3-Al_2O_3$ceramics considerably.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.95-100
• /
• 2007

In the present work, silicon nitride was fabricated with $Y_3Al_5O_{12}$ as a sintering additive and its mechanical properties were investigated. Silicon nitride with 3, 5, and 7wt% of $Y_3Al_5O_{12}$ was prepared and sintered by a Hot Pressing (HP) technique at 1750 and $1800^{\circ}C$ for 2 h. The process was performed under different process pressures of 30 and 45 MPa. Mechanical properties (density, strength, hardness, and fracture toughness) were investigated as a function of the $Y_3Al_5O_{12}$ content in $Si_3N_4$. $Si_3N_4\;-Y_3Al_5O_{12}$ ceramics showing similar mechanical properties compared with $Si_3N_4-Y_2O_3-Al_2O_3$ ceramics. But its high temperature strength was considerably higher than that of $Si_3N_4-Y_2O_3-Al_2O_3$ ceramics.

• 한국세라믹학회지
• /
• 제17권3호
• /
• pp.129-132
• /
• 1980

The effect of the additive on the dielectric property of TiO2 containing 0-2.5 wt. % ZnO was investigated as a function of frequency $5$\times$10^4$ to $6.3$\times$10^7$ cps and temperature from 25 to 375$^{\circ}C$. The dielectric constant decreased due to increasing density and grain size effect with increasing ZnO concentration.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권3호
• /
• pp.239-246
• /
• 1997

The ZnO is stabilize dielectric constant over a broad temperature range because its addition makes the relaxation time short. In this study, the composite oxide material (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_{3}$ was mixed by ZnO additive material and the dielectric polarization characteristics was studied. The relative density was over 90[%] at all specimen in the structural characteristics. Among of the specimen, the relative density of (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_{3}$ with ZnO (0.4mol) has a 95[%]. The grain size of composite oxide material with an increasing ZnO increased and it was 1.0[.mu.m]-1.22[.mu.m]. In the electrical characteristics, the charge and discharge current was increased by ZnO addition. The dielectric relaxation time was increased by space charge polarization at above 110[.deg. C] and the dielectric relaxation time was fixed by space charge polarization of para-dielectric layer at below 110[.deg. C]. The dielectric relaxation time was maximum when the grain size was small. The dielectric relaxation time is decreased with an additive material ZnO and interface polarization, existing void at the grain and grain boundary. The remnant polarization is increased and the coercive electric field is decreased by ZnO.

• 대한전기학회논문지
• /
• 제34권5호
• /
• pp.186-192
• /
• 1985

Co2O3 additive effects on the electrical properties in ZnO varistor are investigated. As the Co Cations being substituted and ionized normally to a divalent state for Zn in the lattice site increase, the leakage current in the prebreakdown region decreases and the so-called

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.345-347
• /
• 1995

ZnO varistor with composition of ZnO(90wt%)-$Bi_2O_3$(3wt%)-$Sb_2O_3$(3.61wt%)-$CO_2O_3$(1.16wt%)-NiO (0.88wt%)-$MnO_2$(0.71wt%)-$Cr_2O_3$(0.93wt%) according to $Al_2O_3$ addtive was fabricated by sintering methods. The optimal densification were established for the processing conditions of 8000 rpm 190$^{\circ}C$ spray drying and 1200$^{\circ}C$ 2hrs sintering. Then here investigated how additive compotions and processing variables affected the electrical and the phesical properties of these ZnO varistors.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.689-694
• /
• 2009

Layer-structured $Na_xCo_2O_4$ was synthesized from $Na_2CO_3\;and\;Co_3O_4$ powders. The chemical concentrations of Na and additive were controlled to enhance the thermoelectric properties over the temperature range from 400 K to 1,150 K. As a result, we obtained the maximum thermoelectric properties at a single phase region with Na content of x=1.5. When Na content was smaller than x=1.5, the thermoelectric properties was low due to formation of second phases of CoO and other oxides. Additionally, Mn was doped to improve thermoelectric properties by means of decreasing thermal conductivity. The results showed that the concentrations of both Na and Mn are all governing factors to determine the thermoelectric properties of $Na_xCo_2O_4$ system.