• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.892-898
• /
• 2005

A long, bis(monodentate), linking Schiff-base ligand L (py-CH=N-$C_6H_4$-N=CH-py) was prepared from 1,4-phenylenediamine and 3-pyridinecarboxaldehyde by the Schiff-base condensation. Ligand L has two terminal pyridyl groups capable of coordinating to metals through their nitrogen atoms. In contrast, the same reaction between 1,2-phenylenediamine and 3-pyridinecarboxaldehyde produced a mixture of imidazol isomers (2-pyridin-3-yl-1H-benzoimidazole), which are connected to one another by the N-H…N hydrogen bonding to form a tetramer. From Zn($NO_3)_2{\cdot}6H_2O$ and ligand L under various conditions, one discrete molecule, trans- [Zn($H_2O)_4L_2]{\cdot}(NO_3)_2{\cdot}(MeOH)_2$, and two 1-D zinc polymers, [Zn$(NO_3)(H_2O)_2(L)]{\cdot}(NO_3){\cdot}(H_2O)_2$ and [Zn(L) (OBC)($H_2O$)], were prepared. In ligand L, the N$\ldots$N separation between the terminal pyridyl groups is 13.994 $\AA$, with their nitrogen atoms at the meta positions (3,3’) in a trans manner. The corresponding N$\ldots$N separations in its compounds range from 13.853 to 14.754 $\AA$.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2004

Two new nickel vanadium borophosphate cluster compounds, $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (1) and $(NH_4)_{3.5}(C_3H_{12}N_2)_{3.5}[Ni(H_2O)_6]_{1.25}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (2) have been synthesized and structurally characterized. Inter-diffusion methods were employed to prepare the compounds. The cluster anion $[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6$ is used as a building unit in the synthesis of new compounds containing $Ni(H_2O){^{2+}_5}$ in the presence of pyrazine and 1,3-diaminopropane. Compounds contain isolated cluster anions with general composition ${[Ni(H_2O)_5]_n[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6}^{-(17-2n)}$ (n = 2, 4). Crystal data: $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$, monoclinic, space group C2/m (no. 12), a = 27.538(2) ${\AA}$, b = 20.366(2) ${\AA}$, c = 11.9614(9) ${\AA}$, ${\beta}$ = 112.131(1)$^{\circ}$, Z = 8; $(NH_4)_{3.5}(C_3H_{12}N_2)_b[Ni(H_2O)_6]_{3.5}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$, triclinic, space group P-1 (no. 2), a = 17.7668(9) ${\AA}$, b = 17.881(1) ${\AA}$, c = 20.668(1) ${\AA}$, ${\alpha}$ = 86.729(1)$^{\circ}$, ${\beta}$ \ 65.77(1)$^{\circ}$, ${\gamma}$ = 80.388(1)$^{\circ}$, Z = 2.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.628-635
• /
• 1999

Direct preparative method of 2,6-diformyl-p-cresol and 2-hydroxy-3-hydroxy-5-methylbenzaldehyde from 2,6-bis(hydroxymethyl)-4-methylphenol using activated $Mn(IV)O_2$ was described. Hexadentate compartmental Iigands, $H_4L[A]\;and\; H_4L[B]$ were prepared by condensation reactions of 2-hydroxy-3-hydroxy methyl-5-methylbenzaldehyde with ethylenediamine and 1,3-diaminopropane respectively. By the reaction of macrocycle($H_4[20]DOTA$) with Ln(III) nitrate {Ln(III)=Pr, Sm, Cd, Dy }, discrete mononuclear Ln(III) complexes of the type $[Ln(H_2[20]DOTA)(ClO_4)(H_2O)]\;{\cdot}\;3H_2O$ were synthesized in the solid state. $[Ln([20]DOTA)(NO_3)(H_2O)](NO_3)_2\;{\cdot}\;xH_2O$ was placed in methanol for 2 days, and $[Ln([20]DOTA)(NO_3)(CH_3OH)]^{2+}$ was formed. The equilibrium constants(K) for the substitution of coordinated $CH_3OH$ in the Ln-[20]DOTA complexes by various auxiliary ligand, $L_a$(=salicylic acid, p-chlorobenzoic acid, benzoic acid, acetic acid, 4-bromophenol) were determined spectroscopically at 25$^{\circ}C$ and 0.1M $NaClO_4$. The K values calculated were in the order of salicylic acid > p-chlorobenzoic acid > benzoic acid > acetic acid > 4-bromophenol, while pKa of auxiliary ligands was in the opposite trend.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.289-294
• /
• 2010

Ni-YSZ (Yttria Stabilized Zirconia) composite powders for SOFC were fabricated by glycine nitrate process. $ZrO(NO_3)_2{\cdot}2H_2O$, $Y(NO_3)_3{\cdot}6H_2O$, $Ni(NO_3)_2{\cdot}6H_2O$ and glycine were chosen as the starting materials. The structural properties of the sintered Ni-YSZ cermets have been investigated with respect to the volume contents of Ni. A porous microstructure consisting of homogeneously distributed Ni and YSZ phases together with well-connected grains was observed. The sintered Ni-YSZ cermets showed a porous microstructure consists of homogeneously distributed Ni and YSZ phases and the grains were well-connected. It was found that the open porosity is sensitive to the volume content of Ni. The Ni-YSZ cermet containing 35 vol% Ni seems to be suitable for the electrode material of SOFC since it provides sufficient open porosity higher than 30%.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.102-107
• /
• 1997

This study was carried out to increase the rate of plant regeneration from embryogenic callus of A. keiskei on MS medium supplemented with ethylene inhibitors. When leaflet, petiolule, and petiole of A. keiskei were cultured on MS medium supplemented with 2, 4-D, callus was well induced from leaflet segments at 2.0 ppm 2, 4-D. Shoot elongation of plantlets and shooting from embryogenic callus of A. keiskei were best on 2, 4-D-free medium supplemented with 2 ppm $AgNO_3$ or 10 ppm $CoCl_2{\cdot}6H_2O$, but it was suppressed on the medium containing 1 ppm 2, 4-D with $AgNO_3$ or $CoCl_2{\cdot}6H_2O$. Root elongation of plantlets from embryogenic callus was best on 2, 4-D-free medium supplemented with 1 ppm $AgNO_3$ or 5 ppm $CoCl_2{\cdot}6H_2O$, but rooting from embryogenic callus was none on the medium containing 1 ppm 2, 4-D with $AgNO_3$ or $CoCl_2{\cdot}6H_2O$. Fresh weight of plantlets from embryogenic callus was heaviest on 2, 4-D-free medium supplemented with 2 ppm of $AgNO_3$ or $CoCl_2{\cdot}6H_2O$, while it was heaviest on the medium containing 1 ppm 2, 4-D with 1 ppm $AgNO_3$ or 2 ppm $CoCl_2{\cdot}6H_2O$.

• Transactions of Materials Processing
• /
• v.27 no.1
• /
• pp.48-53
• /
• 2018

Aluminum nitride (AlN) is used by the semiconductor industry that has requirements for high thermal conductivity. The theoretical thermal conductivity of single crystal AlN is 320W/mK. Whereas, the values measured for polycrystalline AlN ceramics range from 20 W/mK to 280 W/mK. The variability is strongly dependent upon the purity of the starting materials and non-uniform dispersibility of the sintering additive. The conventional AlN sintering additive used yttria ($Y_2O_3$), but the dispersibility of the powder in the mixing process was important. In this study, we investigated the mechanical and thermal conductivity of yttrium nitrate ($Y(NO_3)_3{\cdot}6H_2O$), as a sintering additive in order to improve the dispersibility of $Y_2O_3$. The sintering additives content was in the range of 2 to 4.5wt.%. The density of AlN gradually increased with increasing contents of sintering additive and the flexural strength gradually increased as well. The flexural strength of the sintered body containing 4 wt% of $Y_2O_3$ and $Y(NO_3)_3{\cdot}6H_2O$ was 334.1 MPa and 378.2 MPa, respectively. The thermal conductivities were 189.7W/mK and 209.4W/mK, respectively. In the case of hardness, there was only a slight difference and the average value was about 10 GPa. Therefore, densification, density and strength values were found to be proportional to its content. It was confirmed that AlN using $Y(NO_3)_3{\cdot}6H_2O$ displayed relatively higher thermal conductivity and mechanical properties than the $Y_2O_3$.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.740-744
• /
• 2005

Perovskite-type oxide $La_{1-x}Sr_xCo_{1-y}Fe_yO_{3-{\delta}}$ sols were prepared by sol-gel method using $La(NO_3)_3{\cdot}xH_2O$, $Sr(NO_3)_2$, $Co(NO_3)_2{\cdot}6H_2O$ and $Fe(NO_3)_3{\cdot}9H_2O$ as starting materials. The properties of the perovskite-type oxide sols were investigated by viscometer, FT-IR, TG-DTA and XRD. The prepared sols showed 1.16 cp in average viscosity, and a strong acidic condition of pH 0.5, irrespective of composition of the starting materials. The viscosity of sols at the same volume decreases, but the gelation time of sols, at which the sol viscosity increases rapidly, increases when increasing La concentration in composition of starting materials.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.425-430
• /
• 1994

The effect of inhibitors and catalysts in the synthesis of 2-hydroxyethyl methacrylate(2-HEMA) was studied. As catalysts, triethylamine(TEA), $FeCl_3{\cdot}6H_2O$, $Cu(NO_3)_2{\cdot}2H_2O$, $AlCl_3$, $Na_2Cr_2O_7$were selected. p-Methoxyphenol (PMP) of aq. $NaNO_3$ solution was used as an inhibitor in polymerization. in aq. $NaNO_3$ inhibitor system, triethylamine (TEA), $FeCl_3{\cdot}6H_2O$, and $Na_2Cr_2O_7$, showed good catalytic effects. When p-methoxyphenol(PMP) was used as a polymerization inhibitor, the reaction was very sluggish and noneffective because the metal ion such as $Fe^{3+}$ or $Cr^{6+}$ was reduced by PMP. On the contrary, when aq. $NaNO_3$ was used as an inhibitor in polymerization, the reaction was very fast without deactivation of the metal catalysts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.46-58
• /
• 1991

The synthesized ZnO powder was prepared by spray pyrolysis method using ultrasonic vibrator. The starting solutons were the aqueous solution of $Zn(NO_3)_2\cdot6H_2O$. The concentration was prepared 1M, O.5M, O.25M, and O.lM. The Nz carrier gas was 2.3cm$\cdot{sec}^{-1}$. The prepared powder from the $Zn(NO_3)_2{\cdot}6H_2O$ aqueous solution was Zine oxide with hexagonal structure. The shape of prepared powder was fine size, narrow size distribution, agglomerate-free, nearly sphere particle. Also, the particle size was about $ 0.28-0.61\mum$.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1405-1417
• /
• 2006

The geometrical structures, potential energy surfaces, and energetics for the ligand exchange reactions of tetracoordinated platinum $(PtY_2L_2\;:\;Y,\;L=Cl^-,\;OH^-,\;OH_2,\;NH_3)$ complexes in the ligand-solvent interaction systems were investigated using the ab initio Hartree-Fock (HF) and Density Functional Theory (DFT) methods. The potential energy surfaces for the ligand exchange reactions used for the conversions of $(PtCl_4\;+\;H_2O)^{^\ast_\ast}\;to\;[PtCl_3(H_2O)\;+\;Cl^-]$ and $[Pt(NH_3)_2Cl_2\;+\;H_2O]$$[Pt(NH_3)_2Cl_2\;+\;H_2O]$ to $[Pt(NH_3)_2Cl(H_2O)\;+\;Cl^-] $ were investigated in detail. For these two exchange reactions, the transition states $([PtY_2L_2{\cdot}{\cdot}{\cdot}L^\prime])^{^\ast_\ast} $ correspond to complexes such as $(PtCl_4{\cdot}{\cdot}{\cdot}H_2O)^{^\ast_\ast}$ and $[Pt(NH_3)_2Cl_2{\cdot}{\cdot}{\cdot}H_2O]^{^\ast_\ast}$, respectively. In the transition state, $([PtCl_4{\cdot}{\cdot}{\cdot}H_2O]^{^\ast_\ast}$ and $[Pt(NH_3)_2Cl_2{\cdot}{\cdot}{\cdot}H_2O]]^{^\ast_\ast})$ have a kind of 6-membered $(Pt-Cl{\cdot}{\cdot}{\cdot}HOH{\cdot}{\cdot}{\cdot}Cl)$ and $(Pt-OH{\cdot}{\cdot}{\cdot}Cl{\cdot}{\cdot}{\cdot}HN)$ interactions, respectively, wherein a central Pt(II) metal directly combines with a leaving $Cl^-$ and an entering $H_2O$. Simultaneously, the entering $H_2O$ interacts with a leaving $Cl^-$. No vertical one metal-ligand interactions $([PtY_2L_2{\cdot}{\cdot}{\cdot}L^\prime]) $ are found at the axial positions of the square planar $(PtY_2L_2)$ complexes, which were formed via a vertically associative mechanism leading to $D_{3h}$ or $C_{2v}$-transition state symmetry. The geometrical structure variations, molecular orbital variations (HOMO and LUMO), and relative stabilities for the ligand exchange processes are also examined quantitatively. Schematic diagrams for the dissociation reactions of {PtCl4(H2O)n(n=2,4)} into {$PtCl_3(H_2O)_{(n-2)}\;+\;Cl^-(H_2O)_2$} and the binding energies {$PtCl_4(H_2O)_n$(n = 1-5)} of $PtCl_4$ with water molecules are drawn.