• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.108-113
• /
• 2017

The performance of refrigerant oil at the thrust bearing and at the journal bearing of a scroll compressor is a significant factor. This paper presents the friction and anti-wear characteristics of nano-fluid with a mixture of a refrigerant oil and nano powders. The particle size distribution and oxidation stability of nano powders prepared by the electrical explosion method were analyzed by TEM and BET. It was found that the nanoparticles showed a spherical morphology with sizes ranging of 40-60 nm and were covered with graphite layers of 2-4 nm. The thermal conductivity of POE oil was 0.1-0.5W/mk higher than that of POE oil. The coefficient of friction of Cu-POE was found to be 0.1 higher than that of Al2O3. The cooling capacity of the heat pump with nanofluid increased to 3.67%, and the performance was improved by 5.83%.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.399-407
• /
• 2005

The effect of IN738 additive powder on microstructure and mechanical properties of the wide-gap region brazed with BNi-3 filler metal powder was investigated. The wide-gap brazing was conducted in a vacuum of $2\times10^{-5}torr\;at\;1200^{\circ}C$ with various powder mixing ratios of additive to filler powders. The microstructures of the wide-gap brazed region were analyzed by SEM and AES. The region brazed with only BNi-3 filler metal powder had a microstructure consisted of proeutectic, binary eutectic and ternary eutectic structure, while that brazed with a mixture of IN738 additive powder and BNi-3 filler metal powder had a microstructure consisted of IN738 additive powder, binary eutectic of $Ni_3B-Ni$ solid solution and (Cr, W)B. The fracture strength of the wide-gap brazed region was about 680 MPa regardless of the additive powder mixing ratios. Cracks were initiated at the (Cr, W)B and binary eutectic of $Ni_3B-Ni$ solid solution, and propagated through them in the wide-gap brazed region, which lowered the fracture strength of the region.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.283-288
• /
• 2015

Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at $1300^{\circ}C$ for 3h. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

• Journal of Nutrition and Health
• /
• v.37 no.7
• /
• pp.515-524
• /
• 2004

This study was performed to investigate effect of dried powders and ethanol extracts of garlic flesh and peel on lipid metabolism and antithrombogenic capacity in 16-month-old rats. Forty Sprague-Dawley male rats weighing 618.1$\pm$6.5 g were blocked into five groups according to body weight and raised for 3 months with control and experimental diets containing 5% (w/w) of dried powders of garlic flesh or peel, or ethanol extracts from equal amount of each dried powder and control diet. Plasma and liver total lipids, triglyceride and total cholesterol, and plasma HDL-cholesterol, throm-boxane $B_2$ (TX $B_2$), 6-keto-prostaglandin $F_{1a}$ (6-keto-PG $F_{1a}$) concentrations were measured. Total, insoluble and soluble dietary fibers contents were highest in peel powder followed by fresh powder, and those in ethanol extracts of flesh and peel, especially soluble, very low. Plasma and liver total lipids, triglyceride, and total cholesterol concentrations were lower in all the garlic experimental groups compared to Especially, flesh and peel powder lowered plasma total lipids, triglyceride and total cholesterol concentrations markedly, and flesh powder and flesh ethanol extract lowered liver total lipids, triglyceride and total cholesterol concentration remarkably. Plasma TX $B_2$ concentrations in garlic experimental groups were lower than that of control group, and 6-keto-PG $F_{1a}$ concentrations. In garlic experimental groups were higher than that of control group. Flesh ethanol extract group showed the lowest TX $B_2$ and the highest 6-keto-PG $F_{1a}$ concentrations among experimental groups, so TX $B_2$/6-keto-PG $F_{1a}$ ratio in flesh ethanol extract group was significantly lower than that of control group. Moreover, clotting time was significantly increased in flesh ethanol extract group as compared to control group. In conclusion, intakes of dried powders and ethanol extracts of garlic flesh and peel were effective in lowering lipid levels of liver and plasma. And also flesh ethanol extract diet was most effective in antithrombogenic activity among garlic experimental groups as TX $B_2$/6-keto-PG $F_{1a}$ ratio in flesh ethanol extract group was significantly lower and clotting time was significantly increased in this group as compared to control group.ntrol group.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.602-606
• /
• 2015

Porous W with spherical and directionally aligned pores was fabricated by the combination of sacrificial fugitives and a freeze-drying process. Camphene slurries with powder mixtures of $WO_3$ and spherical PMMA of 20 vol% were frozen at $-25^{\circ}C$ and dried for the sublimation of the camphene. The green bodies were heat-treated at $400^{\circ}C$ for 2 h to decompose the PMMA; then, sintering was carried out at $1200^{\circ}C$ in a hydrogen atmosphere for 2 h. TGA and XRD analysis showed that the PMMA decomposed at about $400^{\circ}C$, and $WO_3$ was reduced to metallic W at $800^{\circ}C$ without any reaction phases. The sintered bodies with $WO_3$-PMMA contents of 15 and 20 vol% showed large pores with aligned direction and small pores in the internal walls of the large pores. The pore formation was discussed in terms of the solidication behavior of liquid camphene with solid particles. Spherical pores, formed by decomposition of PMMA, were observed in the sintered specimens. Also, microstructural observation revealed that struts between the small pores consisted of very fine particles with size of about 300 nm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.510-515
• /
• 2001

This study was performed to evaluate the effect of mushrooms powder (Lentinus edodes, Ganoderma lucidum, Pleurotus ostreatus; 5:3:2, w/w/w) of on the lipid concentration in female Sprague-Dawley rats for 4 weeks. Experimental groups were divided into two dietary groups, the cholesterol diet (Cholesterol group) and the cholesterol diet supplemented mixed mushrooms powder (Mushroom group). The concentration of total cholesterol in serum was significantly decreased by 57.4% in mushroom group compared to cholesterol group. The concentration of HDL-cholesterol was significantly increased by 230% in mushroom group compared to cholesterol group. At the same time, atherogenic index was also significantly decreased by 68.4% in mushroom group compared to cholesterol group. The concentration of triglyceride in liver was significantly increased by 50% in mushroom group compared to cholesterol group. However, the concentrations of triglyceride and phospholipid in serum and cholesterol and phospholipid in liver had no significant difference both groups. This study suggested that mixed mushroom powders exert a cholesterole-lowering effect in hyperlipidemic female rats.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.65-68
• /
• 2012

Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

• Journal of Nutrition and Health
• /
• v.35 no.7
• /
• pp.713-728
• /
• 2002

This study was performed to see effects of whole grape, grape pomace or grape juice intakes on lipid metabolism during aging in old Sprague-Dawely male rats. One hundred twenty rats of 13 months old Sprague-Dawely were blocked into eight groups according to body weight and raised for 3, 5 or 7 months with diets containing 2% (w/w) dried powders of three different pars of grape and 0.02% (w/w) CdCl₂. Body weights of Cd groups were lower than Cd free groups. Kidney and spleen weights were incre ased with age, and EEP weights of Cd groups were lower than those of Cd free groups. Total lipid, triglyceride and total cholesterol concentration in plasma increased with age. Whole grape, grape pomace or grape juice intake lowered plasma total lipid triglyceride and total cholesterol concentrations, and especially grape pomace lowered them markedly. Whole grape, grape pomace or grape juice intake decreased liver total lipid, triglyceride and total cholesterol concentrations and increased fecal lipid excretion. Grape diets decreased and Cd administration increased TBARS concentration in LDL fraction. In conclusion, grape diets were effective in decreasing lipid levels of liver and plasma, TBARS in LDL, and in increasing HDL cholesterol. The grape pomace was most effective among three grape parts. It is plausible that grape might be recommended for the treatment or prevention of cardiovascular disease and delaying aging. (Korean J Nutrition 35 (7): 713∼728, 2002)

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.10a
• /
• pp.41-42
• /
• 2003

Using a developed high-frequency induction heated combustion method. the simultaneous synthesis and densification of WC-xvol.%Co($0{\leq}x{\leq}20$) hard materials was accomplished using elemental powders of W, C and Co. A complete synthesis and densification of the materials was achieved in one step within a duration of 1min. The final relative densities of the composite were over 98.5% for all cases, under the applied pressure of 60 MPa and the induced current. The hardness of the composites decreases and the fracture toughness increases with increasing cobalt content. As the carbon to tungsten ration increases, the hardness increase, but the fracture toughness decreases. The maximum values for the fracture toughness and hardness are 15.1 $MPa{\cdot}m^{1/2}$(at 20vol.%Co, W:C=1:1), and 1928 $kg/mm^{2}$(at 5vol.%Co, W:C=1:1.3), respectively. Therefore we concluded that the HFIHCS method. which can produce WC-xvol.%Co within 1 minute in one step is superior to conventional ones.