• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.16-16
• /
• 2003

본 연구는 ILP(International Lithosphere Project) Task Group II-4가 진행하고 있는 상부맨틀에 대한 3차원 구조도 작성 연구의 일환으로 수행되어졌으며 구조도 작성을 위한 데이터 베이스의 구조는 task group의 표준안을 따랐다. 기존 문헌과 기존의 데이터 베이스를 통해서 획득된 자료를 이용해 동해와 그 주변을 대상으로 하는 지역의 ($32-45^{\circ}$E, $122-148^{\circ}$N) 상부 670km까지의 3차원 구조도 작성을 위한 초기 모델을 구축하였으며, 이 절차를 최대한 자동화하는 프로그램을 포트란을 이용해 만들어보았다. 연구 지역에 대한 곡율을 계산하기 위해 표준타원체 모델인 WGS84과 geoid undulation 모델인 EGM96을 사용했으며 지형 고도 자료는 GTOPO30, GLOBE 1.0, 그리고 Smith and Sandwell 데이터베이스를 사용하여 지구 중심으로부터 지표까지의 거리를 구하였다. 연구지역은 $0.25^{\circ}$간격으로 나누었으며 총 5777개의 격자점을 정의하였으며 각각의 격자점에 1차원 수직구조를 부여함으로써 3차원 모델을 구축하였다. 그리고 지형적으로나 지질학적으로 유사한 지역을 하나의 구역으로 정의하고 동일한 수직구조를 부여함으로써 모든 격자점에 1차원 수직구조를 정의하지 않도록 하였다. 본 연구에서는 지표 지질은 모델에 고려하지 않았지만 지형학적으로 의미가 있는 분지나 수평적으로 불균질성이 뚜렷한 지역을 중심으로 연구 지역의 리젼을 정의하였다. 중요 리젼에 대한 지각구조에 대해서는 기존의 문헌을 통해 모델치를 정의하였으며 지각 하부부터 상부 670km에 대한 부분은 Task Group에서 제시한 표준 모델을 이용했다. 모델을 정의하기 위해 주어진 격자점에 대한 지구 중심으로부터 지오이드까지의 거리, 지오이드로부터 지표까지의 거리를 정의해주었으며, 각 격자점의 수직구조를 정의하기 위해 깊이에 따른 각 매질의 밀도, P파의 속도, S파의 속도, P파에 대한 Q값, S파에 대한 Q값을 정의 해주었다. S파의 속도를 구하기 위해서 지구 내부 물질을 포아송 매질이라는 가정 하에, 관계식을 $Vp{\;}={\;}SQRT(3){\;}{\times}{\;}Vs$ 이용하였다. 획득한 모델치들을 이용해 동해와 동해 인근 지역에 대한 초기모델을 구축하였다.

• Journal of Arbitration Studies
• /
• v.27 no.3
• /
• pp.33-52
• /
• 2017

This article tried to describe the laws concerning the enforcement of foreign arbitration awards in Indonesia. This issue is relevant in the light of frequent curiosity of foreign commentators, business communities, practicing lawyers, concerning the arbitration in Indonesia, in particular its enforcement of foreign arbitration awards. The main laws on arbitration analyzed were, firstly, the Indonesian law on arbitration, namely Law No 30 of 1999 on Arbitration and Alternative Dispute Resolution and the Presidential Regulation No 34 of 1981 concerning the Ratification of the New York Convention on the Recognition and Enforcement of Foreign Arbitral Awards of 1958. The provisions of Law of 1999 analyzed were confined to its international provisions on arbitration, in particular the requirements for the enforcement of foreign arbitration awards and also the requirement that the awards do not violate Indonesian public policy. The problem with the Indonesian arbitration law (and the courts' practice) were that no provisions which provided guidance or meaning with regard to public policy. The absence or lack of guidance or definition on public policy had some times confused lawyers or the parties in dispute fearing that their arbitration awards would not be enforced due to the violation of public policy. Secondly was the different opinion of two Indonesian arbitration experts, Prof. Sudargo Gautama and Prof. Priyatna Abdurrasyid. Both scholars had rather different opinions with regard to the meaning of public policy in Indonesia. Thirdly was a recent case law, Astro Nusantara Bv et.al., vs PT Ayunda Primamitra Case (2010) decided by the Indonesian Supreme Court with regard to the enforcement of foreign arbitration awards. This article concluded that the Indonesian court, in particular the Central of Jakarta Court, so far have given its support that the execution of foreign awards was duly enforced.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.25-30
• /
• 1989

The nonstoichiometry and electrical conductivities of Tm$_2O_3$ were studied in the oxygen pressure $2\;{\times}\;10^{-1}\;-1\;{\tiems}\;10^{-4}$ atm under the temperature ranges from 700 to 1100$^{\circ}$C. The x values of $TmO_{1.5+X}$ were varied in the ranges of 0.1004∼0.0110. The enthalpies of formation of the nonstoichiometric compounds were found to be 5.40-4.71 kcal/mole, and the average activation energy obtained from the plots of log conductivity vs. 1000/T was 1.65 eV. The Po$_2$ dependencies of the electrical conductivity were found to be linear and closely approaximated to ${\sigma}{\alpha} PO{\frac{1}{2}^{/5.3}$ in the temperature range 700∼1100$^{\circ}$C. The nonstoichiometry and the electrical conductivity are due to trivalent metal vacancies.

• Steel and Composite Structures
• /
• v.12 no.4
• /
• pp.353-379
• /
• 2012

The accuracy of the 30% and SRSS rules, commonly used to estimate the combined response of structures, and some related issues, are studied. For complex systems and earthquake loading, the principal components give the maximum seismic response. Both rules underestimate the axial load by about 10% and the COV of the underestimation is about 20%. Both rules overestimate the base shear by about 10%. The uncertainty in the estimation is much larger for axial load than for base shear, and, for axial load, it is much larger for inelastic than for elastic behavior. The effect of individual components may be highly correlated, not only for normal components, but also for totally uncorrelated components. The rules are not always inaccurate for large values of correlation coefficients of the individual effects, and small values of such coefficients are not always related to an accurate estimation of the response. Only for perfectly uncorrelated harmonic excitations and elastic analysis of SDOF systems, the individual effects of the components are uncorrelated and the rules accurately estimate the combined response. In the general case, the level of underestimation or overestimation depends on the degree of correlation of the components, the type of structural system, the response parameter, the location of the structural member and the level of structural deformation. The codes should be more specific regarding the application of these rules. If the percentage rule is used for MDOF systems and earthquake loading, at least a value of 45% should be used for the combination factor.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.388-393
• /
• 2003

Citrus peel extract was prepared using 70％ ethanol solution by two extraction conditions (20$^{\circ}C$ for 72 hours and 85$^{\circ}C$ for 3 hours). The effect of gamma-irradiation on the changes of physiological activity also investigated at 0, 5, 10 and 20 kGy of absorbed doses. Color characteristics, DPPH radical scavenging, tyrosinase inhibition and nitrite scavenging activities of the extracts were measured at 41$^{\circ}C$ for 30 days. Color values were different by extraction methods at the initial stage, which heat-extracted sample had lower L$\^$＊/ - but higher a$\^$＊/ - and b$\^$＊/ -values than those extracted at room temperature. Irradiation changed color of the extract lighter by increasing Hunter color L$\^$＊/ - and a$\^$＊/ -values. DPPH radical scavenging, tyrosinase inhibition and nitrite scavenging activities were not affected by either extraction methods or irradiation but significantly reduced by storage time. Therefore, when the cost-effective extraction methods is selected, the citrus peel extracts, which is a major byproduct in citrus processing, could be used as a functional material in various applications.

• The Korean Journal of Physiology
• /
• v.30 no.1
• /
• pp.77-83
• /
• 1996

Platelet-activating factor(PAF) is a phospholipid mediator of pulmonary inflammation, and immunologic reaction. In this study, the role of PAF on tumor necrosis factor$(TNF_{-{\alpha}})$ production by rat alveolar macrophages(AM) was examined. When PAF $(10^{-12}{\sim}10{-16}\;M)$ alone was added to AM culture, $(TNF_{-{\alpha}})$ production was not significantly increased above the resting level. In contrast, the combined addition of PAF $(10^{-6}\;M)$ and muramyl dipeptide(MDP) $(1.0\;{\mu}g\ml)$ to AM cultures markedly enhanced $(TNF_{-{\alpha}})$ production with 8.2 fold increase compared with AM culture in resting state. This potentiative effect was 313% above the sum of the separate effects of PAF and MDP. To characterize MDP effects on $(TNF_{-{\alpha}})$ production, the dose-response of AM cultured with various concentrations of MDP was tested. High level of MDP $(10\;{\mu}g\ml)$ could not significantly enhance the potentiation effect on $(TNF_{-{\alpha}})$ production compared with AM cultures with low level of MDP $(0.1\;{\mu}g\ml)$, i.e. 112.5% vs 107.8%, respectively when $10^{-10}$ M of PAF was simultaneously added to the cell culture. These data support that the potentiation of TNF. g production in AM culture is mediated by PAF rather than MDf It was also evaluated whether the similar result was obtained in silica, respirable toxic particle-treated AM culture. $(TNF_{-{\alpha}})$ production was also significantly enhanced in the PAF $(10^{-6}\;M)$ and silica $(50\;{\mu}g\ml)$-added cell cultures with 4.7 fold above the value of silica alone-stimulated cells. These results indicate that PAF can potentiate $(TNF_{-{\alpha}})$ production by MDP-or silica- stimulated AM and suggest that PAF may play a potent role in lung inflammation and disease associated with microbe and occupational dust exposures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.11
• /
• pp.968-972
• /
• 2008

Ni/Ti/Al multilayer system ('/'denotes the deposition sequence) was tested for low-resistance ohmic contact formation to Al-implanted p-type 4H-SiC. Ni 30 nm / Ti 50 nm / Al 300 nm layers were sequentially deposited by e-beam evaporation on the 4H-SiC samples which were implanted with Al (norminal doping concentration = $4\times10^{19}cm^{-3}$) and then annealed at $1700^{\circ}C$ for dopant activation. Rapid thermal anneal (RTA) temperature for ohmic contact formation was varied in the range of $840\sim930^{\circ}C$. Specific contact resistances were extracted from the measured current vs. voltage (I-V) data of linear- and circular transfer length method (TLM) patterns. In constrast to Ni contact, Ni/Ti/Al contact shows perfectly linear I-V characteristics, and possesses much lower contact resistance of about $2\sim3\times10^{-4}\Omega{\cdot}cm^2$ even after low-temperature RTA at $840^{\circ}C$, which is about 2 orders of magnitude smaller than that of Ni contact. Therefore, it was shown that RTA temperature for ohmic contact formation can be lowered to at least $840^{\circ}C$ without significant compromise of contact resistance. X-ray diffraction (XRD) analysis indicated the existence of intermetallic compounds of Ni and Al as well as $NiSi_{1-x}$, but characteristic peaks of $Ti_{3}SiC_2$, a probable narrow-gap interfacial alloy responsible for low-resistance Ti/Al ohmic contact formation, were not detected. Therefore, Al in-diffusion into SiC surface region is considered to be the dominant mechanism of improvement in conduction behavior of Ni/Ti/Al contact.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Clinics in Shoulder and Elbow
• /
• v.21 no.1
• /
• pp.37-41
• /
• 2018

Background: The purpose of this study is to evaluate results of superior labrum anterior to posterior (SLAP) repairs and debridement of type II SLAP lesions combined with Bankart lesions. Methods: Between 2010 and 2014, total 58 patients with anterior shoulder instability due to a Bankart lesion combined with a type II SLAP lesion were enrolled. Patients were divided into two groups: group C consisted of 30 patients, each with a communicated Bankart and type II SLAP lesion and group NC consisted of 28 patients, each with a non-communicated Bankart and type II SLAP lesion. Bankart repairs were performed for all patients. SLAP lesions were repaired in group C and debrided in group NC. Clinical results were analysed to compare groups C and NC by using the visual analogue scale pain score, American Shoulder and Elbow Surgeons score, Constant scores, Rowe score for instability and range of motion assessments. Results: The clinical scores were improved in both groups at final follow-up. Also, there were no differences between two groups. No significant difference was found in terms of the range of motion measured at the last follow-up. The number of suture anchors used was significantly higher in group C than in group NC (5.6 vs. 3.8; p=0.021). Conclusions: In this study, it is considered that Bankart repair and SLAP debridement could be a treatment option in patients with a non-communicated type II SLAP lesion combined with a Bankart lesion (study design: IV, therapeutic study, case series).

• Reproductive and Developmental Biology
• /
• v.28 no.1
• /
• pp.7-12
• /
• 2004

This study was performed to establish the effective culture condition for the establishment of clonal lines from porcine fetal fibroblast cells. Fibroblasts derived from a pig fetus (Day 50) were cultured and passaged two times before use. A single cell was seeded in 96-well plates, cultured in medium supplemented with different concentrations of FBS, catalase or $\beta$-mercaptoethanol ($\beta$ME), and classified by cell size and morphology. Cells were passaged two times into 4-well dish before freezing. The establishment efficiencies were not different among different concentrations of FBS (0.3 to 5.1%). However, population doubling time (PDT) was significantly decreased by increasing the FBS concentration (P＜0.05). The establishment efficiency of $\beta$ME-added group (10.4%) was significantly higher than those of catalase-added and control groups (3.5%, and 3.5%, respectively, p＜0.05), and PDT was significantly decreased (23.6 vs 28.1, and 25.5 h, respectively, p＜0.05). However, catalase did not show a positive effect on the establishment efficiency. Cell size and morphology did not affect the establishment efficiency and PDT of clonal lines. The result of present study shows that the establishment efficiency of clonal cell lines can be enhanced by the culture in media supplemented with 30% FBS and $\beta$ME.