• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1998.06a
• /
• pp.50-69
• /
• 1998

Dimethomorph is a novel fungicide with a high level of activity against diseases induced by certain Oomycetes, including fungal populations that are resistant to other products. In several ways, this fungicide illustrates the opportunities and challenges presented by many modern pesticides. The specific mode of action, which affects cell wall formation, is associated with a very high level of performance and low dose rates under field conditions. These low dose rates, combined with a low level of toxicity to non-target organisms present an outstanding safety profile. This same highly-specific mode of action, however, limits the spectrum of activity and suggests the need for a resistance management plan, both of which must be addressed in new product development. In addition, the biological and physiochemical properties of this, and other new products are not adequately described by the traditional classification of fungicides into“protectant”and“systemic”types. These unique profiles provide novel and useful products for disease control.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.25-26
• /
• 2009

We design and demonstrate the controlled morphologies of Ag-dpped ZnO nanowires (NWs) adopting self-contrived hot-walled pulsed laser deposition (HW-PLD). p-type Ag-doping is ensuired by low temperature photoluminescence (PL) spectrum to find the AoX peak at 3.349 eV. Morphology of grown NWs are controlled by changing the kinetic energy and flux of the ablated particles with adjusting the target - substrate (T-S) distance. The analysis on the resultant NWs is presented.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1994-1996
• /
• 1996

This paper presents the fabrication and testing of a polysilicon piezoresistive accelerometer with p+ silicon diaphragm by simple process such as two step photolithography for the RIE process to form the cantilevers and a deep anisotropic etch process for the complete fabrication of the accelerometer. The fabricated accelerometer consists of a seismic mass and four cantilevers on which polysilicon piezoresistors are formed. The measurement of the output signal from the bridge circuit of the fabricated accelerometer is carried out with the HP 3582A spectrum analyzer. The analysis of the experimental result is showed in terms of the sensitivity and the resonant frequency. At atmospheric condition, the measurement values of the sensitivity and the resonant frequency are $11\;{\mu}V/Vg$ and 475 Hz, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• Journal of the Korean Vacuum Society
• /
• v.3 no.3
• /
• pp.355-359
• /
• 1994

Cd1-xCoxIn2Se4(X=0.50) 결정을 수직 Bridgman 방법으로 성장시키고 성장된 결정의 결정구조 및 XPS 특성을 연구하였다. 성장된 결정은 pseudocubic 구조이고 격자상수는 a=5.778$\AA$으로 주어졌다. Cd1-xCoxIn2Se4 결정의 각 성분원소인 cadmium cobalt indium 그리고 selenium에 대한 XPS spectrum으 로부터 결합에너지와 결합상태를 조사하였다. Cd1-xCoxIn2Se4결정과 결합하지 안는 각 성분원소인 cadium cobalt imdium 그리고 selenium에 대한 core level의 XPS spectrum과 비교하면 각 성분원소상 이의 결합에 의한 chemical shift 현상 때문에 core level의 결합에너지가 0.10~4.87 eV 차이가 있다. Cd1-xCoxIn2Se4 결정에서 Co 2P3/2 core level의 주 peak와 statellite peak와의 결합에너지 차이로부터 cadmium과 치화된 cobalt는 Co2+ ion으로 Td symmetry 점에 위치함을 알 수 있다.

• Journal of Magnetics
• /
• v.2 no.4
• /
• pp.111-115
• /
• 1997

The electronic structure of the Kondo insulator CeNiSn has been investigated by using photoemission spectroscopy. A satellite feature is observed in the valence band spectrum about 6 eV below the Ni 3d main peak, indicating a strong Ni 3d Coulomb correlation in CeNiSn. The Ce 4f partial spectral weight exhibits three peak structures, including one due to the 4f1\longrightarrow4f0 transition, another near EF, and the other which overlaps the Ni 3d main peak. We interpret the peak near EF as reflecting mainly the Ce 4f/Sn 5p hybridization, whereas that around the ni 3d main peak as reflecting both the Ce 4f/Ni 3d and Ce 5d/Ni 3d hybridization. Yield measurements across the 4d\longrightarrow4f threshold indicate the Ce valence to be close to 3+. The prominent Fermi edge suggests a metallic ground state in CeNiSn.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.2
• /
• pp.79-83
• /
• 2008

The dampness by treating the surface with polyethylene terephthalate (PET) film was measured to grasp the plasma parameters and was observed the surface condition with an atomic force microscope (AFM) to find the causes of the dampness. Also, the vibrational and rotational temperatures in the plasma were calculated after identifying the radicals within the plasma by analyzing the emission spectral with an emission spectrum. The hydrophilic properties were enhanced, by treating the surface of the PET film with non-equilibrium atmospheric discharge plasma. When the rotational temperature was 0.22 to 0.31 eV within the plasma, surface modification control could be easily carried out to surface treatment of PET film on non-equilibrium atmospheric pressure plasma.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.78-82
• /
• 2021

The Ga₂O₃ single crystal was grown through a floating zone method, and its structural and optical properties were instigated. It has a monoclinic crystal structure with a (100) crystal orientation and an optical band gap energy of 4.6 eV. It showed an average transmittance of 70% in the visible region. At room temperature, its photoluminescent spectrum showed three different peaks: the ultraviolet at 360 nm, the blue-green at 500 nm, and the red peaks at 700 nm. Especially, at liquid nitrogen temperature, the ultraviolet peak was optically active while the others were quenched.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.4
• /
• pp.202-209
• /
• 2002

The stochiometric mix of evaporating materials for the $CuInSe_2$single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CuInSe_2$compound crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $620^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuInSe_2$single crystal thin films measured from Hall effect by van der Pauw method. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $CuInSe_2$single crystal thin film, we have found that the values of spin orbit splitting $\Delta$So and the crystal field splitting $\Delta$Cr. From the photoluminescence measurement on $CuInSe_2$single crystal thin film, we observed free exciton ($E_x$) existing only high quality crystal and neutral bound exciton ($A^{\circ}$, X) having very strong peak intensity. Then, the full-width-at-half-maximum (FWHM) and binding energy of neutral donor bound exciton were 7 meV and 5.9 meV, respectivity. By haynes rule, an activation energy of impurity was 59 meV.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.212-220
• /
• 2001

This study was performed to establish the analytical method of radium and radon in various environmental samples with the ${\gamma}$-ray spectrometry. The major problem in the measurements of low level ${\gamma}$-ray, such as environmental radioactivity, is the fluctuation of ${\gamma}$-ray background spectrum. To overcome this problem, a nitrogen gas was filled up in the detector chamber to reduce the background counts due to airborne radioactivities, i.e., $^{214}Pb$ and $^{214}Bi$, the daughters of $^{222}Rn$ in air. When nitrogen gas flowed around the detector, peak counts of ${\gamma}$-rays from the daughters of $^{222}Rn$ decreased about 80% below 1 MeV and about 20~50% above 1 MeV. The use of nitrogen purging results in approximately tenfold increment of sensitivity.