• Journal of Microbiology and Biotechnology
• /
• v.30 no.5
• /
• pp.726-732
• /
• 2020

Indonesian kefir grains are potential sources of lactic acid bacteria (LAB) that may act as probiotics with specific functional properties. In this study we explored the potential of the probiotic and cholesterol-lowering effect of LAB isolated from Indonesian kefir grains obtained from Bogor, Bandung, Jakarta, and Yogyakarta. The results revealed that 10 isolates showed considerable survivability at low pH and bile salt with total cell reduction of ~3 log colony-forming units per milliliter after exposure to pH 2.5 and 0.5% (w/v) bile salt for 1 and 3 h, respectively. All strains exhibited strong antimicrobial activities against pathogenic bacteria and were sensitive to a wide spectrum of antibiotics but exhibited weak bile salt hydrolase activity. Identification based on 16S RNA suggested that nine isolates were Lactobacillus kefiri and one was Lactobacillus rhamnosus. The ability of the isolates to reduce cholesterol from the media varied, ranging from 22.08% to 68.75% with the highest reduction shown by L. kefiri JK17. The ability to remove cholesterol from the media decreased greatly in resting and dead cells, ranging from 14.58% to 22.08% in resting cells and from 7.89% to 18.17% in dead cells. It can be concluded that Indonesian kefir grains contain LAB potentially acting as probiotics capable of reducing cholesterol. The cholesterol-lowering effect especially occurs when the cells are metabolically active.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.501-516
• /
• 2017

Skin colors of females between the ages of 25-35 from Korea, China, and Vietnam were measured in Seoul, Beijing, and Hanoi using the Minolta CM-600d spectrophotometer. CIE Lab and Munsell HVC data of the face (forehead and both cheeks) and body (neck and arm) were analyzed using t-test, Analysis of Variance (ANOVA), Duncan's Multiple Range Test, Linear Regression Analysis, and K-Means Cluster Analysis using SPSS software. Korean females showed the highest L and V values for the face and body; Vietnamese females showed the highest b value in the face and the highest a value in the body. Higher L and b values for the face were related to higher L and b values of the body; this relationship was more prominent in Korean females. The younger age group (25-29) showed higher L values and lower b values than the older age group (30-35). Females from Korea, China, and Vietnam were grouped into Type 1 and Type 2 based on skin color. Type 1 had darker skin with more redness and yellowness and Type 2 had lighter skin with less redness and yellowness. A total of 88.2% of Korean females belonged to Type 2, 80.4% of Vietnamese females were Type 1, and Chinese females indicated an even distribution of Type 1 and Type 2.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.101-110
• /
• 2009

The vascular plants in the Mt. Hoemun were listed 541 taxa composed of 113 families, 354 genera, 473 species, 1 subspecies, 64 varieties and 3 forms. Divided into 541 taxa; woody plants were 151 taxa (27.9%) and herbaceous plants were 390 taxa (72.1%). Based on the list of rare plants by the Korea Forest Service, 10 taxa were recorded in the studied areas; Lilium distichum (Preservation priority order: No. 159), Lilium callosum (No. 191), Tricyrtis dilatata (No. 97), Iris ensata var. sponianea (No. 197), Gastrodia elata (No.9), Aristolochia contorta (No. 151), Paeonia obovata (No. 30: Legal protection species), Prunus yedoensis (No. 110 : Planted species), Viola albida (No. 202), Schpolia japonica (No. 208). Based on the list of Korean endemic plants, 15 taxa were recorded; Cephalotaxus koreana, Lilium amabile, Salix purpurea var. japonica, Pseudostellaria multiflora, Aconitum pseudolaeve var. erectum, Filipendula glaberrima, Weigela subsessilis, etc. Based on the list of approved for delivering overseas of plants, 10 taxa were recorded; Carex okamotoi, Lilium distichum, Clematis trichotoma, Vaccinium oldhami, Paulownia coreana, Asperula lasiantha; etc. Specific plant species by floral region were total 4S taxa (8.3% of all 541 taxa of vascular plants); Gastrodia elata, Paeonia obovata in class V, Carex arenicola, Corydalis grandicalyx in class IV, 5 taxa (Spiraea salicifolia, Schpolia japonica, Asperula lasiantha, etc.) in class III, 7 taxa (Lilium distichum, Iris ensata var. spontanea, Caryopteris incana, etc.) in class II and 28 taxa (Camptosorus sibiricus, Orixa japonica, Lonicera praeflorens, etc.) in class I. The naturalized plants in the surveyed sites were 13 families, 38 genera, 43 species, 2 varieties, 45 taxa (Phleum pratense, Medicago sativa, Sonchus asper, etc.) and naturalization rate was 8.3% of all 541 taxa of vascular plants. Ambrosia artemisiifolia var. elatior an ecosystem disturbing wild plants have been increasing. Therefore, the counter plants for continuous control and conservation are needed on the ecosystem of Mt. Hoemun.

• Natural Product Sciences
• /
• v.9 no.1
• /
• pp.13-17
• /
• 2003

The hepatoprotective effect of the ethanolic extract of Coccinia indica fruits in rats treated with carbon tetrachloride. In hepatotoxic rats, liver damage was studied by assessing parameters such as aspartate aminotransferase (AST), alanine aminotransferase (AlT), alkaline phosphatase (AIP) and gamma glutamyl transpeptidase (GGT) in serum, and concentrations of total proteins, total lipids, phospholipids, triglycerides and cholesterol in both serum and liver. The effect of co-administration of ethanolic extract on the above parameters was further investigated. Histopathological study of the liver in experimental animals was also undertaken. Hepatic damage as evidenced by a rise in the levels of AST, AIT, AIP and GGT in serum, and also changes observed in other biochemical parameters In serum and liver showed a tendency to attain near normalcy in animals co-administered with the extract. The normal values for AST (IU/L), AIP (IU/I), protein (g/100 ml) and total lipids (mg/100 ml) in serum (i.e.,20.24, 70.04, 5.72 and 135.54 respectively) were found to alter towards values 32.61, 127.11, 3.83 and 265.91 in hepatotoxic rats. These parameters Attained near normal values (I.e.,22.82, 79.30, 5.22 and 151.24 for AST, AIP protein and total lipids respectively) in ethanolic extract co-administered rats. Profound steatosis, ballooning degeneration and nodule formation observed in the hepatic architecture of $CCl_4$ treated rats were found to acquire near-normalcy in drug co-administered rats, thus corroborating the biochemical observations. Thus the study substantiates the hepatoprotective potential of ethanolic extract of Coccinia indica fruits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.234-234
• /
• 2010

The PR transitions in asymmetric dot-in-double-quantum-well (DdWELL) photodetector is identified by bias-dependent spectral behaviors. Discrete n-i-n infrared photodetectors were fabricated on a 30-period asymmetric InAs-QD/[InGaAs/GaAs]/AlGaAs DdWELL wafer that was prepared by MBE technique. A 2.0-monolayer (ML) InAs QD ensemble was embedded in upper combined well of InGaAs/GaAs and each stack is separated by a 50-nm AlGaAs barrier. Each pixel has circular aperture of 300 um in diameter, and the mesa cell ($410{\times}410\;{\mu}m^2$) was defined by shallow etching. PR measurements were performed in the spectral range of $3{\sim}13\;{\mu}m$ (~ 100-400 meV) by using a Fourier-transform infrared (FTIR) spectrometer and a low-noise preamplifier. The asymmetric photodetector exhibits unique transition behaviors that near-/far-infrared (NIR/FIR) photoresponse (PR) bands are blue/red shifted by the electric field, contrasted to mid-infrared (MIR) with no dependence. In addition, the MIR-FIR dual-band spectra change into single-band feature by the polarity. A four-level energy band model is proposed for the transition scheme, and the field dependence of FIR bands numerically calculated by a simplified DdWELL structure is in good agreement with that of the PR spectra. The wavelength shift by the field strength and the spectral change by the polarity are discussed on the basis of four-level transition.

• Korean Journal of Pharmacognosy
• /
• v.10 no.2
• /
• pp.61-67
• /
• 1979

Two pure saponin components, Panax saponin C (protopanaxatriol derivative, ginsenoside Re) and Panax saponin E (protopanaxadiol derivative, ginsenoside $Rb_l$) were isolated from Panax ginseng root and their acute toxicities in mice and antistress effects in rats were investigated. Average lethal doses $(LD_{50})$ of ginsenoside Re were 130mg/kg (i.v.), more than 1,000mg/kg (i.p.) and more than 1,500mg/kg (s.c.), respectively. Average lethal dose of ginsenoside $Rb_{1}$ was 243mg/kg intravenously. Adrenal ascorbic acid and cholesterol contents were significantly decreased when normal rats were exposed to heat $(40^{\circ}C)$ for 30 min. The reduction of the adrenal ascorbic acid and cholesterol contents in rats was partially prevented when the rats received the ginseng saponins prior to exposure to heat stress and most pronounced effects were observed in rats received ginsenoside Re. However, it was found that administration of ginseng alone, without stress, did not significantly change the ascorbic acid and cholesterol contents in adrenal glands. Eosinophil counts in the blood of the rats were elevated when the rats were exposed to the heat stress, and the elevation of the eosinophil counts were prevented with the ginseng saponins under the stress, but the changes were all insignificant statistically.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.261-261
• /
• 2011

펄스 직류 전원 $BCl_3/SF_6$ 플라즈마를 이용하여 GaAs/$Al_{0.2}Ga_{0.8}As$의 선택적 식각을 연구하였다. 식각 주요 공정 변수는 $BCl_3/SF_6$ 플라즈마에서 $SF_6$ 가스 유량(0~50%)이었다. $BCl_3/SF_6$의 총 가스 유량은 20 sccm이었다. 다른 공정 조건인 공정 압력(100 mTorr), 펄스 파워(500 V), 펄스 주파수(200 kHz), 리버스 시간 (0.7 ${\mu}s$)은 일정하게 고정시켰으며 기계적 펌프만을 이용하여 공정을 진행하였다. 오실로스코프(Oscilloscope) 데이터에 의하면 가스의 조성 변화에도 척에 걸리는 입력 전압과 전류가 거의 변화가 없었다. $BCl_3/SF_6$ 가스가 10%의 조성에서 GaAs와 $Al_{0.2}Ga_{0.8}As$의 식각 선택비가 약 48 : 1로 우수한 결과를 나타내었다. 그러나 $BCl_3/SF_6$ 가스의 증가는 GaAs의 식각율과 선택도를 감소시켰다. 그리고 $SF_6$ 가스의 조성비가 30% 이상일 경우에는 GaAs와 $Al_{0.2}Ga_{0.8}As$가 식각되지 않았다. 식각 후에 GaAs의 표면 거칠기(RMS surface roughness)는 0.7~1.3 nm로 나타났다. 위의 결과들을 종합적으로 보면 펄스 직류 전원 $BCl_3/SF_6$의 조성비가 10%일 때 가장 좋은 식각 선택비를 얻을 수 있었다.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.69-76
• /
• 1982

The purpose of this study was to evaluate the color penetration of cavity margin with composite resin restorations in some Korean foods substance-soy sauce and hot bean paste. Fifty specimans which were extracted caries free third molar of young adults recently. All of the prepared 100 cavities were filled with two kinds of composite resin (Hipol$^{(R)}$and Restodent$^{(R)}$). The experimental specimans were divided into five groups by the following procedures. Group I : Filling of composite resin and polishing. Group II : Filling, polishing, etching of cavity and sealing. Group III : Etching, sealing, filling and polishing. Group IV : Etching, sealing, filling, polishing, and repeated of etching of cavity margin and sealing. Group V : Etching, sealing, filling, polishing, and sealing again without etching. Before examination, the restorated teeth were subjected to thermal cycling ($4^{\circ}C$ and $60^{\circ}C$). All the specimens were immersed in soy and 30% hot bean paste solution under $37^{\circ}C$ incubator during six weeks. Then, the specimens were sectioned bucco-lingually through the center of two restorations with diamond disk and examined under a. metallographic microscope. (Union 6617 U.S.A.) Thereafter, the degree of color penetration was calculated and analyzed. The obtained results were as follows: 1. The color penetration was the lowest in the procedure of Group III which was acid etching, sealing, composite resing filling, and polishing. 2. The color penetration occured in soy and hot bean paste, but the degree of penetration was not so significant statistically between them. 3. The degree of color penetration was not so significant statistically between Hipol$^{(R)}$ and Restondent$^{(R)}$.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.491-497
• /
• 2014

PURPOSE. This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS. Internal conical connection type implants, cement-retained abutments, and tungsten carbide-coated abutment screws were used. The abutments were fabricated with commercially pure grade 3 titanium (group T3), commercially pure grade 4 titanium (group T4), or Ti-6Al-4V (group TA) (n=5, each). In order to assess the amount of settlement after abutment fixation, a 30-Ncm tightening torque was applied, then the change in length before and after tightening the abutment screw was measured, and the preload exerted was recorded. The compressive bending strength was measured under the ISO14801 conditions. In order to determine whether there were significant changes in settlement, preload, and compressive bending strength before and after abutment fixation depending on abutment materials, one-way ANOVA and Tukey's HSD post-hoc test was performed. RESULTS. Group TA exhibited the smallest mean change in the combined length of the implant and abutment before and after fixation, and no difference was observed between groups T3 and T4 (P>.05). Group TA exhibited the highest preload and compressive bending strength values, followed by T4, then T3 (P<.001). CONCLUSION. The abutment material can influence the stability of the interface in internal conical connection type implant systems. The strength of the abutment material was inversely correlated with settlement, and positively correlated with compressive bending strength. Preload was inversely proportional to the frictional coefficient of the abutment material.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.380-387
• /
• 2015

A lead slowing-down spectrometer (LSDS) system is a promising nondestructive assay technique that enables a quantitative measurement of the isotopic contents of major fissile isotopes in spent nuclear fuel and its pyroprocessing counterparts, such as $^{235}U$, $^{239}Pu$, $^{241}Pu$, and, potentially, minor actinides. The LSDS system currently under development at the Korea Atomic Energy Research Institute (Daejeon, Korea) is planned to utilize a high-flux ($>10^{12}n/cm^2{\cdot}s$) neutron source comprised of a high-energy (30 MeV)/high-current (~2 A) electron beam and a heavy metal target, which results in a very intense and complex radiation field for the facility, thus demanding structural shielding to guarantee the safety. Optimization of the structural shielding design was conducted using MCNPX for neutron dose rate evaluation of several representative hypothetical designs. In order to satisfy the construction cost and neutron attenuation capability of the facility, while simultaneously achieving the aimed dose rate limit (< $0.06{\mu}Sv/h$), a few shielding materials [high-density polyethylene (HDPE)eBorax, $B_4C$, and $Li_2CO_3$] were considered for the main neutron absorber layer, which is encapsulated within the double-sided concrete wall. The MCNP simulation indicated that HDPE-Borax is the most efficient among the aforementioned candidate materials, and the combined thickness of the shielding layers should exceed 100 cm to satisfy the dose limit on the outside surface of the shielding wall of the facility when limiting the thickness of the HDPE-Borax intermediate layer to below 5 cm. However, the shielding wall must include the instrumentation and installation holes for the LSDS system. The radiation leakage through the holes was substantially mitigated by adopting a zigzag-shape with concrete covers on both sides. The suggested optimized design of the shielding structure satisfies the dose rate limit and can be used for the construction of a facility in the near future.