• 제목/요약/키워드: $U_3 O_8$

검색결과 507건 처리시간 0.028초

Immobilization of GH78 α-L-Rhamnosidase from Thermotoga petrophilea with High-Temperature-Resistant Magnetic Particles Fe3O4-SiO2-NH2-Cellu-ZIF8 and Its Application in the Production of Prunin Form Naringin

  • Xu, Jin;Shi, Xuejia;Zhang, Xiaomeng;Wang, Zhenzhong;Xiao, Wei;Zhao, Linguo
    • Journal of Microbiology and Biotechnology
    • /
    • 제31권3호
    • /
    • pp.419-428
    • /
    • 2021
  • To efficiently recycle GH78 thermostable rhamnosidase (TpeRha) and easily separate it from the reaction mixture and furtherly improve the enzyme properties, the magnetic particle Fe3O4-SiO2-NH2-Cellu-ZIF8 (FSNcZ8) was prepared by modifying Fe3O4-NH2 with tetraethyl silicate (TEOS), microcrystalline cellulose and zinc nitrate hexahydrate. FSNcZ8 displayed better magnetic stability and higher-temperature stability than unmodified Fe3O4-NH2 (FN), and it was used to adsorb and immobilize TpeRha from Thermotoga petrophilea 13995. As for properties, FSNcZ8-TpeRha showed optimal reaction temperature and pH of 90℃ and 5.0, while its highest activity approached 714 U/g. In addition, FSNcZ8-TpeRha had better higher-temperature stability than FN. After incubation at 80℃ for 3 h, the residual enzyme activities of FSNcZ8-TpeRha, FN-TpeRha and free enzyme were 93.5%, 63.32%, and 62.77%, respectively. The organic solvent tolerance and the monosaccharides tolerance of FSNcZ8-TpeRha, compared with free TpeRha, were greatly improved. Using naringin (1 mmol/l) as the substrate, the optimal conversion conditions were as follows: FSNcZ8-TpeRha concentration was 6 U/ml; induction temperature was 80℃; the pH was 5.5; induction time was 30 min, and the yield of products was the same as free enzyme. After repeating the reaction 10 times, the conversion of naringin remained above 80%, showing great improvement of the catalytic efficiency and repeated utilization of the immobilized α-L-rhamnosidase.

대용량 우라늄디옥사이드 펠릿 산화를 위한 공기산화로의 설계 고려사항에 대한 연구 (A Study on the Design Considerations of Vol-Oxidizer for High-Capacity Uranium Dioxide Pellets)

  • 정재후;이효직;박병석;윤지섭;김영환
    • 대한기계학회논문집A
    • /
    • 제31권4호
    • /
    • pp.472-482
    • /
    • 2007
  • This study deals with the design and implementation results for a high-capacity vol-oxidizer that can convert Uranium Dioxide pellets to $U_3O_8$ powder for up to several tens of kg HM/batch. We developed two versions of the $1^{st}$ vol-oxidizer and the $2^{nd}$ vol-oxidizer. Through an experiment with the $1^{st}$ vol-oxidizer, we deduced some problems concerning the design considerations such as the recovery rate of $U_3O_8$, the oxidation time of the Uranium Dioxide pellets, the exothermic reaction, and the powder dispersion. From the analyses of the drawbacks of the $1^{st}$ vol-oxidizer, we devised some novel items such as a folding type mesh, vibrators, and mixing blades. Also, we used the Stokes and Density ratio Eq. to determine the most reasonable flux for preventing a powder dispersion. Compared with the results of the $1^{st}$ vol-oxidizer, we showed that both the permeability of the $U_3O_8$ powders and the oxidation rate of the Uranium Dioxide pellets of the $2^{nd}$ vol-oxidizer were remarkably increased, and the temperature of the reactor was controlled well in spite of an exothermic reaction. Also, the powder was not entirely dispersed through the outlet of the voloxidizer. The experimental results of this work can help in the design of a novel and efficient vol-oxidizer with a higher capacity.

Study of the Electrolytic Reduction of Uranium Oxide in LiCl-Li$_{2}$O Molten Salts with an Integrated Cathode Assembly

  • 박성빈;서중석;강대승;권선길;박성원
    • 방사성폐기물학회지
    • /
    • 제3권2호
    • /
    • pp.105-112
    • /
    • 2005
  • 650$^{\circ}C$의 LiCl-Li$_{2}$O 용융염계에서 10 g U$_{3}$O$_{8}$/batch 규모의 장치를 이용해서 우라늄산화물의 전해환원 특성에 대한 평가를 수행하였다. 일체형 음극은 고체전극, 우라늄산화물과 우라늄산화물을 담아주는 다공성 용기(멤브레인)로 구성된다. 멤브레인 재료로는 325-mesh 스테인레스강막과 다공성 마그네시아 도가니를 사용하였다. 일체형 음극의 재질에 따른 LiCl-3 wt$\%$ Li$_{2}$O계와 U$_{3}$O$_{8}$-LiCl-3 wt$\%$ Li$_{2}$O계의 순환 전압측정법 결과로부터 전해환원 반웅 메커니즘을 규명하였다. 일체형 음극의 재질에 따른 우라늄산화물의 직접 및 간접 전해환원에 대한 실험을 수행하였다. 그 결과, 325-mesh스테인레스강막을 사용하여 직접 및 간접 전해환원으로 금속전환을 수행하였을 때 낮은 전류효율로 인해 우라늄산화물을 금속우라늄으로 환원시키지 못했으며, 마그네시아 다공성 도가니를 사용하여 간접 전해환원으로 금속전환을 수행하였을 때는 높은 전류효율로 인해 우라늄산화물을 금속우라늄으로 환원시킬 수 있었다

  • PDF

호주의 우라늄 자원 및 광업현황

  • 고상모
    • 광물과산업
    • /
    • 제21권1호
    • /
    • pp.56-66
    • /
    • 2008
  • 이 동향자료는 Geoscience Australia에서 2001년 발간한 "Geoscience Australia Mineral Resources Report No.1"과 역시 동 기관에서 2007년 발행한 "Australia's Identified Mineral Resources 2007" 중 일부 내용을 발췌하여 정리 한 것으로서 요약하면 다음과 같다. OECD/NEA와 IAEA(2000)는 세계적으로 분포하는 우라늄 광상유형을 지질학적인 형성환경에 따라 15개 유형으로 분류하였으며 호주에서는 각력복합형, 부정합형, 사암형, 지표형, 변성교대형, 변성형, 화산형, 관입형 및 맥상형이 보고되어 있다. 유형별 자원량은 각력복합형, 부정합형 및 사암형 3개 유형 광상이 약 93%를 차지하며, 각력복합형광상의 자원량이 63%에 달한다. 현재 개발되는 광상은 각력복합형의 올림픽댐 광산, 부정합형인 레인저 광산 및 사암형인 베벌리 광산이다. 호주는 세계 총 우라늄 자원량의 27%를 보유하고 있어 세계 1위를 차지한다. 올림픽댐광상이 항내채광을 하는 우라늄 광산으로서는 세계에서 가장 큰 광상으로서 US$80 이하에서 회수가능한 RAR(적정확정자원량)이 476,000톤이다. 이 자원량은 세계 총 자원량의 18%를 차지하며, 단일 광산으로서는 세계최대규모이다. 2006년 호주의 우라늄 총생산량은 $U_3O_8$ 8,943톤(7,584톤 U)이며 이는 세 광산에서 생산된 양으로서 캐나다에 이어 두 번째로 많은 양(세계 생산량의 19%)이다. 2006년 우라늄 수출량은 $U_3O_8$ 8,660톤(7,344톤 U)이며 수출가는 호주달러 5억2천9백만불에 달한다. 호주는 우라늄 수출국들과 "원자력협력협약"을 맺어 평화적 목적을 위해서만 공급한다는 단서를 달고 있으며 IAEA에 의해 관리/감독되고 있다. 최근 호주 정부는 지구과학연구소에 많은 예산을 투여하여 육상에너지안전대책을 발의하여 자원개발에 요구되는 탐사자료 확보에 주력하고 있다.

  • PDF

리튬 폴리머 전지용 $Li_xV_3O_8$ Composite Cathode의 충방전 특성 (Charge/discharge Properties of $Li_xV_3O_8$ Composite Cathode for Lithium Polymer Batteries)

  • 박복기;김종욱;박계춘;구할본
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 C
    • /
    • pp.1591-1593
    • /
    • 1997
  • The purpose of this study is to research and develop $Li_xV_3O_8$ composite cathode for lithium polymer battery. We investigated electrochemical, interfacial properties and charge/discharge cycling of $Li_xV_3O_8$/SPE/Li cell. The radius of semicircle associated with the interfacial resistance of $Li_xV_3O_8$/SPE/Li cell increased very slowly during discharge process from 100% SOC to 90% SOC. And then the cell resistance was increased at discharge process from 10% SOC to 0% SOC. The discharge capacity based on $Li_xV_3O_8$ was 212mAh/g at 15th cycle. The $Li_xV_3O_8$/SPE/Li cell has a good properties.

  • PDF

마이크로 리블렛이 부착된 NACA0012 익형의 항력 감소 연구 (Drag Reduction of NACA0012 Airfoil with a Flexible Micro-riblet)

  • 장영길;이상준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.479-482
    • /
    • 2002
  • Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

  • PDF

우라늄이온 포집을 위한 수식된 피를 고분자 피막전극 (Deposition of Uranium Ions with Modified Pyrrole Polymer Film Electrode)

  • 차성극;이상봉
    • 전기화학회지
    • /
    • 제3권3호
    • /
    • pp.141-145
    • /
    • 2000
  • 전도성이 뛰어난 피롤고분자 피막을 전기화학적으로 중합하고 이를 Gr/ppy(Polypyrrole),X.O.(xylenol orange)형의 수식된 전극을 제작하여 U(VI)의 포집에 이용하였다. 사전피막제인 NBR(nitrile butadiene rubber)을 사용하였을 때 중합속도는 $3.22\times10^{-3}s^{-1}$로 이를 사용하지 않았을 때 보다 1.6배 느린 반응이었다. 포집된 U(VI)의 양은 ppy $1.70Ccm^{-2}$ 당에 $1.55\times10^{-4}g$ 이었으며, 인공해수 중에서 matrix효과는 $6.8\%$로 나타났다. ppy전극이 Gr/ppy, $X.O^{4-}UO^+$형으로 수식됨에 따라서 피막자체의 임피던스가 증가하여 ppy만일 때의 확산에 지배적인 전도과정에서 피막자체의 전자전도와 이온도핑과정이 함께 영향을 받는 결과를 보였다. ppy전극을 X.O.로 수식하여 U(VI)를 포집함에 따라 전기이중층의 용량은 각각 56과 130여 배로 증가하였다.

습식 및 건식법에 의한 모의 사용후핵연료의 O/M비 측정 (The measurement of oxygen and metal ratio of simulated spent fuels by wet and dry chemical analysis)

  • 최계천;이창헌;김원호
    • 분석과학
    • /
    • 제16권2호
    • /
    • pp.117-124
    • /
    • 2003
  • 고온 건식공정의 사용후핵연료 산화분말 ($U_3O_8$)과 경 중수로 연계 핵연료 제조공정의 $UO_2$ 소결체 물성 이해에 필요한 Oxygen/Metal 비를 습식 및 건식 분석방법으로 측정하였다. $UO_2$ 분말에 핵분열생성물 원소의 산화물을 일정량 첨가하고 $1,700^{\circ}C$의 수소분위기에서 소결시켜 20,000~60,000 MWd/MtU 연소도 범위의 사용후핵연료와 화학조성이 유사한 모의 사용후핵연료를 제조하였다. 습식법에 의한 O/M 비 측정을 위하여 혼합산 (10 M HCl : 8 M $HNO_3$, 2.5:1 V/V)에 의한 가압산분해법으로 모의 사용후핵연료를 용해하고 우라늄과 핵분열생성물 원소를 추출 크로마토그래피로 분리한 후 금속원소의 총량을 유도결합플라스마 원자방출분광분석법으로 결정하였다. 또한 $UO_2$가 산화될 때의 무게변화를 열중량 무게분석법 (thermogravimetric)으로 측정하여 O/M비를 계산하고 습식법으로 얻은 결과와 비교하였다. $Mo_{0.4}-Ru_{0.4}-Rh_{0.1}-Pd_{0.1}$ 합금이 O/M비 측정에 미치는 영향을 조사하였다.

구중질환(口中疾患)의 침구치료(鍼灸治療)에 관한 고찰(考察) (A study of Literature Review on the acupuncture and moxibution treatments for stomatopathy)

  • 윤현민;안창범;김철홍
    • Korean Journal of Acupuncture
    • /
    • 제21권1호
    • /
    • pp.175-199
    • /
    • 2004
  • Objectives : To study acupuncture and moxibution treatments for stomatopathy( aphthae, oral ulceration, mycolic stomatitis, halitosis, thirst, bitter) the ancient and the present literatures were reviewed. Methods : We've got compared and analyzed 55 kinds of literatures. Results and Conclusions : 1. The acupuncture meridians used frequently for stomatopathy were $Su-yangmy\bar{o}ng-Taejang-ky\bar{o}ng(LI),\;Chok-yangmy\bar{o}ng-Wi-Ky\bar{o}ng(S),\;Immaek-Ky\bar{o}ng(CV)$. 2. The acupoints used frequently for aphthae were $Sungjang(CV_{24}),\;Yomchon(CV_{23}),\;Hapkok(LI_4),\;Nogung(P_8),\;Chok-samni(S_{36}),\;Hyopko(S_6),\;Sugu(GV_{26})$. 3. The acupoints used frequently for oral ulceration were $Hapkok(LI_4),\;Nogung(P_8),\;Chok-samni(S_{36}),\;Kokchi(LI_{11}),\;Sotaek(SI_1),\;Pisu(B_{20}),\;Wisu(B_{21}),\;Samgan(LI_3),\;Yomchon(CV_{23}),\;Chichang(S_4)$. 4. The acupoints used frequently for mycolic stomatitis were $Hapkok(L_4),\;Chichang(S_4),\;Hyopko\;(LI_4),\;Sungjang(CV_{24}),\;Samumgyo(SP_6)$. 5. The acupoints used frequently for halitosis were $Naejong(S_{44}),\;Chok-samni(S_{36}),\;Chung-wan\;(CV_{12}),\;Sang-wan(CV_{13}),\;Hawan(CV_{10}),\;Kongson(SP_4),\;Wisu(B_{21}),\;Nogung(P_8),\;Sugu(GV_{26}),\;Sungjang(CV_{24})$. 6. The acupoints used frequently for thirst were $Sosang(L_{11}),\;Sangyang(LI_1),\;Sotaek(SI_1),\;Kwanch'ung(TE_1),\;Ch'\bar{o}kt'aek(L_5),\;T'ae-gye(K_3),\;Kokt'aek(P_3),\;Sugu(GV_{26}),\;Samgan(LI_3),\;Igan(LI_2),\;T'aech'ung(Liv_3),\;Sojangsu(B_{27})$. 7. The acupoints used frequently for bitter were $Yangn\bar{u}ngch'\bar{o}n(G_{34}),\;Hy\bar{o}njong(G_{39}),\;Kwanch'ung(TE_1),\;Tamsu(B_{19}),\;Chokkyu\bar{u}m(G_{44}),\;Y\bar{o}n-gok(K_2),\;Shinmun(H_7),\;Chok-Samni(S_{36})$.

  • PDF