• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.444-449
• /
• 2010

Ulmus davidiana var. japonica is a deciduous tree used in traditional medicine. In this study, we examined the antioxidant and anti-inflammatory activity of extracts and compounds isolated from U. davidiana var. japonica stem barks for development of cosmetic phyto-materials. Phytochemical examination of the stem bark led to the isolation and characterization of three known compounds, (+)-catechin (1), (+)-catechin-7-O-${\beta}$-D-apiofuranoside (2), and procyanidin B3 ((+)-catechin-($4{\alpha}{\to}8$)-(+)-catechin) (3). Their bioactivities including antioxidant (DPPH ree radical scavenging assay) activity, anti-inflammatory (nitric oxide nhibition assay) were evaluated. Most of the crude extracts and isolates indicated significant antioxidant potential compared with BHT and ${\alpha}$-tocopherol as controls. Futhermore, all compounds showed higher inhibitory activities for NO production in Raw 264.7 cells than the L-NMMA using the positive control. Eespecially, (+)-catechin (1) and (+)-catechin-7-O-${\beta}$-D-apiofuranoside (2) which could inhibit more than 90% of the NO production at a concentration of 100 ${\mu}g/m{\ell}$, implying excellent anti-inflammatory activity.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.99-107
• /
• 1997

This study Provides the treatment methods of liquid wastes from the dissolution/purification process of nuclear fuel raw material and the fabrication process of nuclear fuel powder. One of the treatment methods is to process liquid waste from uranium raw material dissolution/purification process. This waste, of the strong acid, can be reused to dissolve the fine ADU particles in filtrate which is ADU waste of pH 8.0 converted from AUC waste after recovery of uranium. To dissolve the fine ADU particles, ADU filtrate was pretreated to pH 4.0 with the dissolution/purification waste, and then mixed with the lime to pH 9.2 and aged for 30 minutes. From this processing, uranium content of the filtrate was decreased to below 3ppm. The waste from fuel powder fabrication is emulsified solution dispersed with fine oil droplets. This emulsion was destroyed effectively by adding and mixing the nitric acid with rapid heating at the same time. After this processing, $Na_2U_2O_7$ compound is produced by addition of NaOH. Optimum condition of this processing was shown at pH 11.5, and uranium content of the filtrate was analyzed to 5ppm. To remove the trace of uranium in the filtrate, lime should be added. Otherwise, 4N nitric acid was used to destroy the emulsion directly, and then lime was added to this waste. Uranium content of the treated filtrate was below 1 ppm. In addition to these wastes, the trace of uranium in filtrate after recovery of uranium from the AUC waste which is produced during PWR power preparation, is treated with NaOH to takeup fluorine(F) in the waste because fluorine is valuable and toxic material. In the finally treated waste, uranium was not detected.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.592-601
• /
• 2013

This work, which was about the synthesis of 3-(1,8-Naphthalimido) propyl methacrylate and GMA copolymers and their physical properties, investigated the compositions of the copolymer, the reactivity ratios of the monomer, resonance effect(Q), polar effect(e) and fluorescence effect of 1,8-naphthalicanhydride. Azobisisobutyronitronitryl(AIBN) as an initiator was employed at $60^{\circ}C$ with dimethylformamide(DMF) of solvent for the copolymerization of NIPM. $r_1$ was found to be higher than $r_2$ from the reactivity ratios of the monomer obtained from F-R and K-T methods. NIPM was found to be more copolymerized than GMA. The fluorescence spectrums of these polymers showed a weak monomer fluorescence band at 380 nm and a strong excimer fluorescence band at about 460 nm.

• Journal of Oral Medicine and Pain
• /
• v.1 no.1
• /
• pp.8-13
• /
• 1973

The authors had studied the oral environmental changes by salivary salivary pH, amount, periodontal Index in patient with active pulmonary tuberculosis patients. Among the subjects, The experimental group was consisted of 100 patients (50 males and 50 females) of 20-29 years and 100 persons of control group (50 males and 50 females) of 20-29 years. The measurement of salivary amount was performed with wide mouthed plastic (2 Inches) bottle for avoidance of Ionization of SiO2 by using of glass bottle and salivary pH was checked by pH meter 27 radiometer Copenhagen. The results are as follows : 1. The slivary pH does not appear to be characteristic of tuberculous paticents. 2. The obtained salivary amount indicated no significant to the tuberculous patients as compared to the obtained supposedely wealthg individuals. 3. The Russel Index wasfound higher and there had found more periodontal involvement(3 times than normal) in the experimental group.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.3
• /
• pp.199-207
• /
• 1993

In order to obtain a good microorganism capable of degrading microcrystaline cellulose (avicel), the screening test was carried out from soil and brown-rot wood. 8 strains which had good avicel-hydrolyzing activity were isolated. Among them, HK 47 which exhibited the highest avicel hydrolyzing activity was identified as Trichoderma sp. HK 47. Maximum avicel-hydrolyzing enzyme production from Trichoderma sp. HK 47 was obtained with the optimum medium contained carboxymethylcellulose 1.5% as carbon source, NaN030.75% as nitrogen source, KH2P040.5%, MgSO4.7H2O 0.1%, Tween 800.005% (V/V) during stationary cultivation at pH 6.0, 3$0^{\circ}C$ In this case, the production of avicel-hydrolyzing enzyme was 0.028 U/ml.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.8-13
• /
• 2001

Cerium oxide ($CeO_2$) thin film has been proposed as a buffer layer between the ferroelectric thin film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS) structures for ferroelectric random access memory (FRAM) applications. In this study, $CeO_2$ thin films were etched with $Cl_2$/Ar gas mixture in an inductively coupled plasma (ICP). Etch properties were measured for different gas mixing ratio of $Cl_2$($Cl_2$+Ar) while the other process conditions were fixed at RF power (600 W), dc bias voltage (-200 V), and chamber pressure (15 mTorr). The highest etch rate of $CeO_2$ thin film was 230 ${\AA}$/min and the selectivity of $CeO_2$ to $YMnO_3$ was 1.83 at $Cl_2$($Cl_2$+Ar gas mixing ratio of 0.2. The surface reaction of the etched $CeO_2$ thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. There is a Ce-Cl bonding by chemical reaction between Ce and Cl. The results of secondary ion mass spectrometer (SIMS) analysis were compared with the results of XPS analysis and the Ce-Cl bonding was monitored at 176.15 (a.m.u). These results confirm that Ce atoms of $CeO_2$ thin films react with chlorine and a compound such as CeCl remains on the surface of etched $CeO_2$ thin films. These products can be removed by Ar ion bombardment.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.60-64
• /
• 2000

This paper studies the relation between the Fundamental Frequency (F0) and the formants of simple vowels in the Korean language sung by sopranos. It is hewn that, in soprano singing, the F0 of a vowel affects its formants. For this reason the formants of simple vowels sung by sopranos must be considered in all over the soprano singing range. We recorded the five simple vowel sounds /a/, /e/, /i/, /o/, and /u/ sung by five professional sopranos from A3 (220.0Hz) to A5 (880.0Hz) in the major scale and compared the formants of the sung vowels with those of spoken vowels. We observed that F1 and F2 of sung vowels were stable in low F0 (lower than B4) but in high F0 (higher than B4), F1 and F2 lost their stabilities. In the case of /a/, /o/, and /u/, the slope of the F1-F2 graph was about 2.6, and those of the F0-F2 and F0-Fl graphs were 2.2-2.5 and 0.7-1.0, respectively. And as the F0 increases, the F1 and F2 of sung vowels /a/, /e/, /i/, /o/, and /u/ were almost the same. At A5, the Fl and F2 of five sung vowels had the same values. This results suggest that the relation between the F0 and the formants be used to synthesize soprano's singing vowels.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.553-566
• /
• 1997

Origin, behavior and enrichment of environmental toxic elements from the Deokpyeong area were investigated on the basis of major, trace and rare earth element geochemistry. Coaly metapelites of the Deokpyeong area are subdivided into grey phyllite, dark grey phyllite, coaly slate and black slate, which are interbedded along the Ogcheon Supergroup. The coaly slate had been mined for coal, but mining is closed. The coaly and black slates are lower contents of $SiO_2$ and $Al_2O_3$, and higher contents of LOI, CaO, $Na_2O$ and BaO as compared with the phyllitic rocks. Rare earth elements are highly enriched in the coaly and black slate. Average compositions (ppm) of minor and/or environmental toxic elements in the coaly and black slate are revealed as As=127, Ba=30,163, Cd=18, Cr=740, Cu=84, Mo=378, Pb=43, Sb=12, Se=44, U=144, V=8,147 and Zn=292, which are extremely high concentrations than those in the NASC compositions. Major elements (average enrichment index; 5.34) in the coaly metapelites are mostly depleted, excepting $P_2O_5$ and BaO, normalized by NASC. Rare earth elements (average enrichment index; 1.48) are enriched in the coaly slate. On the basis of NASC, minor and/or environmental toxic elements in the coaly metapelites were strongly enriched of all the elements with the exception of Co, Cs, Ni and Sr. Average enrichment index of trace elements in coaly metapelite is 31.51 (coaly slate; 51.94 and black slate; 15.46). Especially, enrichment index of potentially toxic elements (As, Ba, Cr, Cu, Mo, Ni, Sb, Se, U, V and Zn) of the rock is 46.10 (grey phyllite; 7.15, dark grey phyllite; 4.77, coaly slate; 88.96 and black slate; 22.11). These coal formations were deposited in basin of boundary between terrestrial and marine environments deduced to carbon, sulfur (C/S=2.2 to 275.7), trace and rare earth elements characteristics. Irregular behavior and dispersion between major, minor and rare earth elements of those metapelites indicates a variable source materials, incomplete mixing of differential source and/or reequilibrium of diagenesis and metamorphism.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.65-76
• /
• 1989

The purpose of this study was to observe the effect on the removal of dentinal smear layer and morphological changes of reduced dentin surfaces by various dentin surface conditioners. Thirty-two healthy human premolars extracted due to periodontal or orthodontic reasons were used. The teeth were cross-sectioned to expose dentin at the middle portion of the crown with diamond rotary saw. The specimens were then divided into 8 groups. The sectioned dentin surfaces in group 1 to 4 were grinded with No. 400 grit silicone abrasive paper and those in group 5 to 8 were cut with #700 carbide bur under air-water spray. The grinded or cut dentin surfaces were conditioned with 3% $H_2O$, Dentin Conditioner(GC Inter. Corp., Japan), and Scotchprep(3M Dent Prod., U.S.A) according to manufacturer's directions. All the specimens were dried in room temperature for 48 hours, and gold-coated with Eiko ion coater(Eik-engineering Co.), and observed in Hitachi S-450 Scanning electron microscope at 15-25 KV. The following results were obtained; 1. The dentin surfaces grinded with the silicon abrasive paper were rougher in texture and heavier in amount of smear layer than those cut with the carbide bur. 2. Scrubbing of 3% $H_2O_2$ was not effective in removing dentinal smear layer. 3. 20-second conditioning of Dentin Conditioner (GC Inter. Corp) resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin. 4. Scotchprep removed the smear layer very effectively. But at the same time it dissolved the peritubular dentin. 5. Irrespective of the uses of the silicon carbide abrasive paper or the carbide bur the morphological changes of dentin surfaces treated with the same conditioning agents were similar.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.673-679
• /
• 2015

The culture conditions needed to maximize the production of laccase from Pholiota highlandensis mycelia were investigated. Among the tested media for laccase production, Coriolus versicolor medium (CVM; 2% dextrose, 0.4% peptone, 0.6% yeast extract, 0.046% KH₂PO₄, 0.1% K₂HPO₄, 0.05% MgSO₄·7H₂O) showed the highest activity for the enzyme. Then, to optimize culture conditions for laccase activity, the influences of various carbon, nitrogen, phosphorus, and inorganic salt sources in CVM were investigated. The optimum culture medium was 2% fructose, 0.4% peptone with 0.6% yeast extract, 0.05% NaH₂PO₄, and 0.05% MgSO₄·7H₂O as carbon, nitrogen, phosphorus, and inorganic salt sources, respectively. Several aromatic compounds in the medium enhanced laccase activity to varying degrees. Guaiacol induced maximum laccase production, yielding 114.1 U/ml laccase activity after cultivation for 11 days at 25℃. The optimum pH and temperature for laccase production were 8.0 and 35℃, respectively. Native polyacrylamide-gel electrophoresis (PAGE) followed by laccase-activity staining with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as the substrate was performed to identify the presence of laccase under the optimum conditions studied. Zymogram analysis of the supernatant culture showed an enzymatic band with a molecular mass of about 90 kDa.