• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.564-567
• /
• 2001

본 연구에서는 중형 크기의 자외선 광축매 반응기를 이용한 최적 살균 조건을 알아보았다. 반응기의 직경에 따른 살균효과는 반응기의 직경이 클수록 살균효과는 감소하였으며, $TiO_2$ 농도에 따른 살균효과에서는 $TiO_2$의 농도가 증가할수록 살균효과는 증가하였고 과다한 $TiO_2$농도에 의한 살균효과의 감소는 본 연구에 사용된 0.6%의 $TiO_2$농도에서는 관찰되지 않았다. 광촉매의 종류에 따른 살균효과는 glass bead 보다는 백운모를 이용한 bead가 더 우수하였다. 중형 크기 반응기의 살균효율은 1분동안 62%, 5분후에는 94.3%, 15분후에는 99.8%의 살균효율을 보였고 30$mg/{\ell}$이상의 $H_2O_2$를 첨가할 경우 5분후의 살균효과는 99%이상이었다.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1214-1218
• /
• 2005

Ti-HMS samples in which titanium species exist in various forms of isolated tetrahedral state, finely dispersed $TiO_2$ cluster, and some in extra-framework anatase phase were prepared via a direct synthesis route using dodecylamine (DDS) as a structure directing agent by systematically varying the titanium loadings between 2 and 50 mol% Ti/(Ti+Si) in substrate composition. Physicochemical properties of the materials were evaluated using XRD, SEM/TEM, N2 adsorption, UV-vis and XANES spectroscopies. Catalytic properties of Ti-HMS in cyclohexene and 2,6-di-tert-butyl phenol (2,6-DTBP) oxidation using aqueous $H_2O_2$, and vapor phase photocatalytic degradation of acetaldehyde were evaluated. High $H_2O_2$ selectivity was obtained in cyclohexene oxidation, and cyclohexene conversion was found primarily dependent on the amount of tetrahedrally coordinated Ti sites. For bulky 2,6-DTBP oxidation and photocatalytic oxidation of acetaldehyde, on the other hand, conversions were found dependent on the total amount of Ti sites and maintaining an uniform mesoporous structure in the catalysts was not critical for efficient catalysis.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3021-3024
• /
• 2009

$Zn_2Ti_{1-x}Fe_xO_4\;(0\;{\leq}\;x\;{\leq}\;0.7)$ photocatalysts were synthesized by polymerized complex (PC) method and investigated for its physico-chemical as well as optical properties. $Zn_2Ti_{1-x}Fe_xO_4$ can absorb not only UV light but also visible light region due to doping of Fe in the Ti site of $Zn_2TiO_4$ lattice because of the band transition from Fe 3d to the Fe 3d + Ti3d hybrid orbital. The photocatalytic activity of Fe doped $Zn_2TiO_4$ samples for hydrogen production under UV light irradiation decreased with an increase in Fe concentration in $Zn_2TiO_4$. Consequently, there exists an optimized concentration of iron for improved photocatalytic activity under visible light (${\lambda}{\leq}$420 nm)

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.241-245
• /
• 2013

입상(대나무)활성탄 상에 나노 $TiO_2$ 결정을 담지 즉 분말코팅 하였다. 이와 같이 $TiO_2$ 담지된 활성탄 복합체의 광촉매 활성도는 자외선 조사를 통한 메틸렌블루 수용액의 분해를 통해 측정하였다. 저온 수열합성법(${\leq}200^{\circ}C$, pH 11)을 통해 광학적 촉매활성도가 높은 $TiO_2$를 활성탄 상에 담지 할 수 있었으며, BET 표면적을 측정하여 계산된 $TiO_2$ 분말의 평균입도는 50 nm 정도였다. 수열처리 과정에서 $TiO_2$가 합성되면서 동시에 활성탄의 표면 공극과 기공 상에 코팅이 이루어졌다. 이러한 수열합성법을 통한 합성은 $TiO_2$의 anatase에서 rutile로의 상전이 시작 온도를 $200^{\circ}C$ 부근으로 낮추는 결과를 가져올 수 있어, 합성온도에 따라 저온에서 순수한 anatase 또는 anatase와 rutile이 혼합된 $TiO_2$ 결정상들을 코팅 시킬 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2883-2888
• /
• 2013

To enhance the power conversion efficiency of dye-sensitized solar cell (DSSC), the surface of titanium dioxide ($TiO_2$) photoelectrode was modified by hydroxylation treatment with $NH_4OH$ solution at $70^{\circ}C$ for 6 h. The $NH_4OH$ solutions of various concentrations were used to introduce the hydroxyl groups on $TiO_2$ surface. As the concentration of $NH_4OH$ was increased, the short-circuit current density ($J_{SC}$) value and conversion efficiency of solar cells were increased because the amount of adsorbed dye molecules on $TiO_2$ surface was increased. As a result of the surface modification to introduce hydroxyl groups, the concentration of adsorbed dye on the $TiO_2$ surface could be improved up to 32.61% without the changes of morphology, surface area and pore volume of particles. The morphology, the specific surface area, the pore volume and the chemical states of $TiO_2$ surface were characterized by using FE-SEM, $N_2$ adsorption-desorption isotherms and XPS measurements. The amount of adsorbed dye and the performance of fabricated cells were analyzed by using UV-Vis absorption spectroscopy and solar simulator.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.46-55
• /
• 2003

TiO$_2$-WO$_3$(8.2wt%) coatings were prepared by the APS (Atmospheric Plasma Spraying) process to clarify the relationship between the process parameters(H$_2$ gas flow rate of plasma 2nd gas and spraying distance) of the APS coating and photo-decomposition efficiency kinetics of the MB(methylene blue) aqueous solution decomposition and to understand the effect of addition of WO$_3$ on photocatalytic properties of TiO$_2$ sprayed coating. Further, the temperature and velocity of flying particles were measured by DPV-2000 to investigate the relationship between microstructure of coatings and process parameters. Properties of coatins were investigated by XRD, SEM, XPS, RAMAN, UV/VIS spectrometer. In case of the TiO$_2$-WO$_3$(8.2wt%) coating, it had a lower anatase fraction than that of pure-TiO$_2$ coatings because of flying in the higher temperature plasma plume by the heavy weight of TiO$_2$, WO$_3$. And, when WO$_3$ added powders were spayed, the doping effects of W ions substituted into the Ti ion sites was not occured during melting and solidification cycles of spraying. It was found that the addition of WO$_3$ was ineffective effective on increasing photo-decomposition efficiency of TiO$_2$ sprayed coating.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.358-361
• /
• 2004

The photocatalytic degradation of Endocrine Discruptors, dibuthyl phthalate(DBP) has been investigated over TiO$_2$ photocatalysts irradiated with a ultraviolet (UV) light. The effect of operational parameters, i.e., reaction time, light intensity, pH and additive on the degradation rate of aqueous solution of Endocrine Discruptors has been examined. Results show that the employment of efficient photocatalysts and the selection of optimal operational parameters may lead to degradation of Endocrine Discruptors solutions.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2001년도 정기총회 및 봄 학술발표회 초록집
• /
• pp.138-139
• /
• 2001

$TiO_2$/UV 고급 산화 공정을 실제 산업 폐수에 적용하였다. 회분식 원통형 반응기에서 T산업 폐수를 광반응시킨 결과 COD 값과 TOC 값이 24시간 경과된 후 95% 이상의 제거 효율을 나타내었다. 광반응에 미치는 인자에 대한 연구에서 $TiO_2$ powder가 0.1 $g/{\ell}$ 에서 8 $g/{\ell}$까지는 투입된 광촉매의 량과 광반응속도가 비례적으로 증가되었으나 10 $g/{\ell}$ 이상에서는 광차폐효과가 나타나 광반응속도가 감소하였으며, UV 광원이 강할수록 광반응 속도는 증가하였고 초기 pH는 광촉매 반응에 영향을 미치지 않음을 알 수 있었다.

• 한국대기환경학회지
• /
• 제18권3호
• /
• pp.223-230
• /
• 2002

Titania photocatalytic oxidation reactors were studied to investigate degradation efficiencies of hydrocarbons. In general, it is well known phenomena that thin layered titania oxidizes most of hydrocarbons to carbon dioxide and water under UV light. In this study, degradation efficiencies were measured due to changes in reactor structures, UV sources, the number of titania coatings, and various hydrocarbon chemicals. It was proven that gas degradation efficiencies are related to such factors as UV transmittance of coating substance, collision area of surface, and gas flow rate. For packing type annular reactor, about 98% degradation efficiency was achieved for achieved for propylene of 500 ppm level at a flow rate of 100 ml/min. Several gases were also tested for double-coated titania thin film under the condition of continuous flow of 100 ml/min and 365 nm UV source. It was shown that degradation efficiencies were decreasing in the order: $C_3$ $H_{6}$, n-C$_4$ $H_{10}$, $C_2$ $H_4$, $C_2$ $H_2$, $C_{6}$ $H_{6}$ and $C_2$ $H_{6}$./. 6/./.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.1-7
• /
• 2015

The degradation of off-flavors which is 2-Methylisoborneol (2-MIB) and geosmin by means of ultrasound (US) and pulsed ultraviolet (PUV) irradiation and its combination with catalyst (wire mesh, wire mesh coated TiO₂, and TiO₂) and additive (H₂O₂) were investigated via water system. A combination treatment of TiO₂ and H₂O₂ heterogeneity with US (24 kHz) and PUV (6000 W) has shown improved results in destroying 2-MIB and geosmin, which may be attributed to chain reactions by the enhanced formation of hydroxyl radicals (·OH) through H₂O₂ dissociation and reactive oxide ions of TiO₂ addition. Rapid degradation of off-flavors occurred within 2 min under PUV process with H₂O₂ 100 mg/L (81.5% for 2- MIB; 79.3% for geosmin) and TiO₂ 100 mg/L (83.7% for 2-MIB; 79.8% for geosmin), while compared with H2O2 100 mg/L (58.4% for 2-MIB; 58.0% for geosmin) and TiO₂ 100 mg/L (59.2% for 2-MIB; 38.5% for geosmin) within 5 min under US process. Surprisingly, the emphasis was given on the comparison with the same injected energies between PUV and US on degradation efficiency. Based on the injected energy comparison, the US provided better degradation performance under equal input power of 200 kJ with H₂O₂ 100 mg/L, while compared with H₂O₂ 100 mg/L under PUV process. Our findings suggest that US can be more effective compared to PUV for the degradation of off-flavors in aspect of energy consumptions.