• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.2
• /
• pp.146-153
• /
• 1998

The optical near-field patterns, propagation loss and mode sizes of x-cut $Ti:LiNbO_3$ optical waveguide which was fabricated by Ti-diffusion varying with Ti strip thickness in wet oxygen atmosphere were discussed at optical wavelength 1550nm. As Ti thickness increased from $760{\AA}$, the insertion loss of waveguide was decreased. But at Ti thickness $1500{\AA}$, mode sizes are widely broadened. The Ti thickness of below $1100{\AA}$ and above $1500{\AA}$ showed negative effects to propagation loss and fiber coupling. The best Ti thickness for fabricating low propagation loss and good fiber coupling was inferred to be between $1100{\AA}-1500{\AA}$ in our conditions. And for Ti thickness $1150{\AA}$, its propagation loss, horizontal/vertical mode sizes were showed 1.61 dB/cm, $11.9/8.9{\mu}m$ for TM, 0.22 dB/cm, $12.0/9.1{\mu}m$ for TE respectively.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.355-361
• /
• 1999

We have synthesized the soluble polymide based side chain system with covalently attached NLO chromophore Disperse Red 1. The developed polymer is optically transparent in the range of optical communication wave-lengths. Its glass transition temperature$(T_g)$ and thermal decomposition temperature$(T_d)$ are $225^{\circ}C, 310^{\circ}C$ respectively. The poled film with the poling field of $100 V/\mu\textrm{m}$ shows that the dielectric constant is 3.37 at the 10-kHz frequency, the refractive indices of TM and TE modes are both 1.631 at $\lambda = 1300 nm$, and the Electro-optic coefficients are 4.6~9.2 pm/V at $\lambda = 1300 nm$. There are no decays of the EO coefficient in the poled polymer at $180^{\circ}C$ in one hour, and $90^{\circ}C$ in 500 hours.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.184-191
• /
• 2003

New pyranone derivative, 2-((3E)-4(2H, 3H, -benzo[3, 4-d] 1, 3-dioxolan-5-yl)-2-oxo-but-3-enyloxy)-5-hydroxy-4H-pyran-4-one (Seletinoid $G^{TM}$), was designed as a novel retinoid on the assumption that the pyranone ring may mimic the carboxylic acid moiety in retinoid structure. The enolic hydroxy of pyranone at five position was easily deprotonated to form an enolate. The role of enolate was similar to that of carboxylic acid. To evaluate the value of Seletinoid G as an anti-aging ingredient, various tests were performed for example inhibitory effect for MMP-l expression, anti-oxidative activity, procollagen synthesis in hairless mouse and primary skin irritation. The result of this study suggested that our new synthetic retinoid could be used as a safe material for anti-aging cosmetics.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.85-87
• /
• 2004

We fabricated flexible thermoradiotherapy probes to alternated combination with Interstitial hyperthermia and Brachyradiotherapy thermoradiotherapy probe was coated by gold plate on polyethylene brachytherapy probe. When Agar phantom was heated 15 minute with 30 W radiofrequency power, temperature increased as 5oC for polyethylene probe and 20oC for gold coated polyethylene probe. We observed that the 1 cm square array would heat a volume with a 1.25 cm radius circular field cross section to therapeutic temperatures (90% relative SAR using Tm) and the 2 cm square array with a 1.75 cm radius rectangular field with central inhomogeneity. With 2 cm long electrode implants, we observed that the 1 cm square array would heat a 3 cm long sagittal section to therapeutic temperature (90% relative SAR using Tm). The histopathological changes associated with RF heating of normal canine brains have been correlated with thermal distributions. RF needle electrode heating was applied for 50 min to generate tissue temperatures of 43${\circ}$C. We obtained a quarter of the heated tissue material immediately after heating and sacrificed at intervals from 7${\sim}$30 days. The acute stage was demonstrated by liquefactive necrosis, pyknosis of neuronal element in the gray matter. Mild gliosis occurring around the necrosis was demonstrated in the last sacrificed (days30)canine brain.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.174-183
• /
• 2003

To obtain effective and safe topical depigmenting agents, we synthesized hydroxybenzoates, alkoxybenzoates, and 3,4,5-trimethoxycinnamate containing a thymol moiety and screened then for high-level inhibitory activity against melanin synthesis. Among them, 5-methyl-2-(methylethyl)phenyl (2Ε)-3-(3,4,5-trimethoxyphenyl)prop-2-enoate (Melasolv)$^{TM}$ 4h, showed the most potent depigmenting effect ($IC_{50}$/ = 10$\mu$M) with low cytotoxicity ($IC_{50}$/ = 200$\mu$M). To find the inhibition mechanism of our candidate, various in vitro tests were performed such as DPPH assay, tyrosinase activity in mushroom or in culture cell and expression of tyrosinase, TRP-l and TRP-2. The result of this study suggested that 4h inhibited melanin synthesis by reducing the expression of tyrosinase and TRP-l at the transcriptional level in melan-a melanocytes.s.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.302-305
• /
• 2003

Effect of feeding far infrared-irradiated rice on survival ability of mice against drowning was investigated. Moisture absorption of far infrared-irradiated rice was about 1.3-fold higher than that of normal rice. L-Value was maintained high during cooking and storage. Weight of mice was not influenced by far infrared-irradiated rice content. No significant difference in survival abilities of mice between normal rice and far infrared-irradiated rice was shown until 1 breeding week. Significant differences in survival ability between two groups were found in 2 (9.5%) and 3 breeding weeks (7.2%).

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.657-664
• /
• 2021

In this study, we investigated the relationships between the air quality (PM_2.5, PM₁₀, O₃) concentrations and local geographical characteristics (terrain heights, building area ratios, population density in 9 km × 9 km gridded subareas) in the Seoul metropolitan area. To analyze the terrain heights and building area ratios, we used the geographic information system data provided by the NGII (National Geographic Information Institute). Also, we used the administrative districts and population provided by KOSIS (Korean Statistical Information Service) to estimate population densities. We analyzed the PM_2.5, PM₁₀, and O₃ concentrations measured at the 146 AQMSs (air quality monitoring system) within the Seoul metropolitan area. The analysis period is from January 2010 to December 2020, and the monthly concentrations were calculated by averaging the hourly concentrations. The terrain is high in the northern and eastern parts of Gyeonggi-do and low near the west coastline. The distributions of building area ratios and population densities were similar to each other. During the analysis period, the monthly PM_2.5 and PM₁₀ concentrations at 146 AQMSs were high from January to March. The O₃ concentrations were high from April to June. The population densities were negatively correlated with PM_2.5, PM₁₀, and O₃ concentrations (weakly with PM_2.5 and PM₁₀ but strongly with O₃). On the other hand, the AQMS heights showed no significant correlation with the pollutant concentrations, implying that further studies on the relationship between terrain heights and pollutant concentrations should be accompanied.

• Corrosion Science and Technology
• /
• v.3 no.2
• /
• pp.81-86
• /
• 2004

The sulfide stress corrosion cracking (SSCC) resistance of API X70 grade steel weldment has been studied using SSCC test in NACE TM-O177 method A. Also, microstructures and hardness distribution of weldment was investigated. The microstructure of SAW joint composed ferrite, pearlite and some MA constituent. Instead of hardening in CGHAZ, softening on the HAZ near base metal occurred. The low carbon TMCP type steel used for SAW showed softening behaviour in the HAZ adjacent to base metal, which was known to be closely related with the SOHIC (stress oriented hydrogen induced cracking). The SSC testing revealed that the API X70 SAW weld was suitable for sour service, satisfying the NACE requirements. By suppressing softening in the ICHAZ region, the SSCC resistance of low carbon TMCP steel welded joints could be more improved.

• Fisheries and Aquatic Sciences
• /
• v.25 no.11
• /
• pp.537-548
• /
• 2022

Apparent digestibility coefficients (ADCs) of dry matter, crude protein, crude lipid, nitrogen-free extract, energy and essential amino acids in animal-based feed ingredients were determined for olive flounder (Paralichthys olivaceus). A reference diet (RF) was formulated to contain 1.0% chromic oxide (Cr₂O₃) as an inert indicator. Nine test diets were formulated to contain RF and one of the feed ingredients (pollock meal [PM], jack mackerel meal [JMM], anchovy meal [AM], cod meal [CM], sardine meal [SM], sand eel meal [SEM], tuna meal [TM], meat meal [MM] and squid liver meal [SLM]) at a 7:3 ratio in each diet designated as PM, JMM, AM, CM, SM, SEM, TM, MM and SLM, respectively. Olive flounder, averaging 150 ± 8.0 g, were stocked at a density of 25 fish per tank in 400-L fiberglass tanks attached with fecal collection columns. Feces were collected from triplicate groups of fish one time a day for four weeks. Dry matter and crude protein ADCs of CM and SEM were significantly higher than the other tested ingredients. Lipid ADCs of JMM, CM and SEM were significantly higher than the other test ingredients. Energy ADCs of CM and SEM were significantly higher than that of the other tested ingredients. The availability of amino acids in CM was generally higher than the other animal protein sources. PM exhibited the lowest amino acid availability among the treatments. Interestingly, MM exhibited significantly higher nutrient digestibility than several marine-based ingredients. However, CM and SEM are seeming to be highly digestible and effective to use in olive flounder diet compared to the other tested ingredients. Overall, the results of this study provide information about the bioavailability of nutrients and energy in animal feedstuffs to apply when formulating cost-effective practical feeds for olive flounder.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.69-79
• /
• 2013

The aim of this study was to evaluate the effect of surface conditioning on the shear bond strength of zirconium-oxide ceramic to resin cement. A total of 120 disk-shaped zirconium-oxide ceramic blocks(3-TZP, Kyoritsu, Tokyo, Japan) were treated as follows: (1) no treatment; (2) sandblasting with 110 ${\mu}m$ aluminum-oxide(Al2O3); (3) particles tribochemical silica coating(RocatecTM, 3M ESPE). Then zirconium-oxide ceramic blocks were divided into six groups(10 for each group) and bonded with resin cement(Rely X U-200, 3M ESPE). (1) No treatment / No treatment (2) No treatment / Sandblasting with 110 ${\mu}m$ aluminum-oxide particles (3) No treatment / Silica coating (4) Sandblasting with 110 ${\mu}m$ aluminum-oxide particles / Sandblasting with 110 ${\mu}m$ aluminum-oxide particles (5) Sandblasting with 110 ${\mu}m$ aluminum-oxide particles / Silica coating (6) Silica coating / Silica coating. Each group was tested in shear bond strengths by UTM. Data analysis included one-way analysis of variance(ANOVA) and the Tukey Honestly Significant Difference test (P=0.05). Group that bonded two silica coated specimen showed a highest bond strength(P<0.05). Two silica coated surface conditioning group and air-abrasion and silica coated surface conditioning group showed significantly difference with other groups(P<0.05). Other groups had no significantly difference each other. Within the limitation of this study, Surface conditioning with Rocatec treatment to each side of specimen provided the highest bond strength.