• 제목/요약/키워드: $TiO_x$

검색결과 2,131건 처리시간 0.035초

ITO 기판에 제작된 PLZT 박막의 후열처리 온도에 따른 전기적 특성평가 (The electrical properties of PLZT thin films on ITO coated glass with various post-annealing temperature)

  • 차원효;윤지언;황동현;이철수;이인석;손영국
    • 한국진공학회지
    • /
    • 제17권1호
    • /
    • pp.28-33
    • /
    • 2008
  • R.F 마그네트론 스퍼터링 방법을 이용하여 Indium tin oxide(ITO)가 증착된 유리기판 위에 PLZT ($Pb_{1.1}La_{0.08}Zr_{0.65}Ti_{0.35}O_3$) 박막을 제작하였다. 기판온도를 $500^{\circ}C$로 고정하여 증착한 후 급속열처리 방법으로 다양한 온도 ($550-750^{\circ}C$)에서 후열처리 하였다. 후열처리온도의 변화에 따른 PLZT 박막의 결정학적 특성을 X선 회절법을 통하여 분석하였고 원자간력 현미경을 이용하여 박막의 표면 상태를 관찰하였다. 또한 precision material analyzer 을 이용하여 분극이력곡선과 피로특성을 측정하였다. 후 열처리 온도가 증가함에 따라 잔류분극 값(Pr)은 $10.6{\mu}C/cm^2$ 에서 $31.4{\mu}C/cm^2$로 증가하였으며 항전계(Ec)는 79.9 kV/cm에서 60.9 kV/cm로 감소하는 경향을 보였다. 또한 피로특성의 경우 1MHz 주파수에서 ${\pm}5V$의 square wave를 인가하여 측정한 결과 $700^{\circ}C$에서 후열처리한 시편의 경우 $10^9$회 이상의 분극반전을 거듭하였을 때 분극값이 15% 감소하는 결과를 나타내었다.

Enhanced Light Harvesting by Fast Charge Collection Using the ITO Nanowire Arrays in Solid State Dye-sensitized Solar Cells

  • Han, Gill Sang;Yu, Jin Sun;Jung, Hyun Suk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.463-463
    • /
    • 2014
  • Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

  • PDF

제3기층 기저역암에 협재되는 벤토나이트의 광물학, 지화학적 연구 및 층서적 적용 (Mineral Chemistry and Geochemistry of the Bentonites Intercalated within the Basal Conglomerates of the Tertiary Sediments in Korea and Their Stratigraphical Implication)

  • 이종천;이규호;문희수
    • 자원환경지질
    • /
    • 제34권1호
    • /
    • pp.13-23
    • /
    • 2001
  • 김포, 장기 및 포항분지의 기저역암에 협재되는 벤토나이트에 대하여 X-선회절분석, 주사전자현미경 관찰, 중광물 분석, 화학 분석, 양이온교환능, 산소 및 수소 동위원소 분석을 이용한 광물학적 특성을 고찰하였다. 중광물 분석 결과 세 지역에서 모두 화산암에서의 특징인 깨끗한 결정면을 가지고 있는 저어콘과 인회석, 각섬석 및 흑운모가 산출되었는데, 천북역암의 시료에서는 외형이 심하게 변질되고 깨져있는 흑운모가 관찰된다. 주사전자현미경으로 각 시료를 관찰한 결과 감포와 장기역암 시료에서는 불석광물이 자생하고 있는 모습과 화산재의 탈유리질화 작용으로 생간 몬모릴로나이트가 honey-comb 구조를 보이는 등 속성작용의 증거가 관찰된 반면, 천북역암에서는 점토입자편(clay flake)들이 조밀하고 불규칙하게 엉켜 있는 모습이 쇄설성 기원임을 지시한다. 구조식을 구해본 결과 스멕타이트 그룹중 이팔면체에 해당하는 몬모릴로나이트이며 층간의 양이온은 대부분이 2가의 $Ca^{2+}$$Mg^{2+}$ 임을 알 수 있었다. 천북역암의 몬모릴로나이트 구조식에서, 팔면체에 들어있는 Fe의 산화상태를 나타내는 $Fe^{2+}/Fe^{3+}$ 비가 다른 시료보다 훨씬 적은 것은 몬모릴로나이트의 생성온도를 이용하여 생성당시의 퇴적두께를 계산했을 때, 천북역암에서의 시료가 929~963 m로 이는 야외에서의 층후인 530~580 m를 초과하고 있다. 이상의 결과 천북역암의 벤토나이트는 다른곳에서 화산회의 속성작용에 의해 형성된 후 지표에 노출되어 이동, 재 퇴적되었을 가능성을 높이 시사한다. 정제시료에 대한 주 원소분석과 미량원소분석 결과와 구조식의 자료를 이용하여 판별분석을 실시한 바, 세 분지의 시료는 구분이 가능하였다. 이는 이들의 기원이 되는 화산회의 성분과 퇴적환경의 차이에서 비롯된 것으로서, $TiO_{2}/Al_{2}O_3$비와 호정원소(compatible elements)의 함량이 천북역암에서 가장 높고, 불호정원소(incompatible element)의 함량은 상대적으로 적은 것으로, 천북 역암의 것이 상대적으로 염기성인 화산회에서 유래되었음을 알 수 있고, Fe의 경우 천북역암의 것이 주 원소분석에서나 구조식내에서 모두 3가가 우세한 것으로 보아 이의 산화 환경에 의한 영향이 판별에 있어서 큰 역할을 했음을 지시해 준다.

  • PDF

Impedance Spectroscopy Models for X5R Multilayer Ceramic Capacitors

  • Lee, Jong-Sook;Shin, Eui-Chol;Shin, Dong-Kyu;Kim, Yong;Ahn, Pyung-An;Seo, Hyun-Ho;Jo, Jung-Mo;Kim, Jee-Hoon;Kim, Gye-Rok;Kim, Young-Hun;Park, Ji-Young;Kim, Chang-Hoon;Hong, Jeong-Oh;Hur, Kang-Heon
    • 한국세라믹학회지
    • /
    • 제49권5호
    • /
    • pp.475-483
    • /
    • 2012
  • High capacitance X5R MLCCs based on $BaTiO_3$ ceramic dielectric layers exhibit a single broad, asymmetric arc shape impedance and modulus response over the wide frequency range between 1 MHz to 0.01 Hz. Analysis according to the conventional brick-layer model for polycrystalline conductors employing a series connection of multiple RC parallel circuits leads to parameters associated with large errors and of little physical significance. A new parametric impedance model is shown to satisfactorily describe the experimental spectra, which is a parallel network of one resistor R representing the DC conductivity thermally activated by 1.32 eV, one ideal capacitor C exactly representing bulk capacitance, and a constant phase element (CPE) Q with complex capacitance $A(i{\omega})^{{\alpha}-1}$ with ${\alpha}$ close to 2/3 and A thermally activated by 0.45 eV or ca. 1/3 of activation energy of DC conductivity. The feature strongly indicate the CK1 model by J. R. Macdonald, where the CPE with 2/3 power-law exponent represents the polarization effects originating from mobile charge carriers. The CPE term is suggested to be directly related to the trapping of the electronic charge carriers and indirectly related to the ionic defects responsible for the insulation resistance degradation.

Studies on the Production of Artificial Zeolite from Coal Fly Ash and Its Utilization in Agro-Environment

  • Lee, Deog-Bae;Henmi, Teruo;Lee, Kyung-Bo;Kim, Jae-Duk
    • 한국환경농학회지
    • /
    • 제19권5호
    • /
    • pp.401-418
    • /
    • 2000
  • 1. Production of the artificial zeolite from coal ash Coal fly ash is mainly composed of several oxides including $SiO_2$ and $Al_2O_3$ derived from inorganic compounds remained after burning. As minor components, $Fe_2O_3$ and oxides of Mg, Ca, P, Ti (trace) are also contained in the ash. These components are presented as glass form resulting from fusion in the process of the combustion of coal. In other word, coal ash may refer to a kind of aluminosilicate glass that is known to easily change to zeolite-like materials by hydrothermal reaction. Lots of hot seawater is disposing near thermal power plants after cooling turbine generator periodically. Using seawater in the hydrothermal reaction caused to produce low price artificial zeolite by reduction of sodium hydroxide consumption, heating energy and water cost. As coal ash were reacted hydrothermally, peaks of quartz and mullite in the ash were weakened and disappeared, and new Na-Pl peaks were appeared strengthily. Si-O-Si bonding of the bituminous coal ash was changed to Si-O-Al (and $Fe^{3+}$) bonding by the reaction. Therefore the produced Na-Pl type zeolite had high CEC of 276.7 $cmol^+{\cdot}kg^{-1}$ and well developed molecular sieve structure with low concentration of heavy metals. 2. Utilization of the artificial zeolite in agro-environment The artificial zeolite(1g) could remove 123.5 mg of zinc, 164.7 mg copper, 184.4 mg cadmium and 350.6 mg lead in the synthetic wastewater. The removability is higher 2.8 times in zinc, 3.3 times in copper, 4.7 times in cadmium and 4.8 times in lead than natural zeolite and charcoal powder. When the heavy metals were treated at the ratio of 150 $kg{\cdot}ha^{-1}$ to the rice plant, various growth inhibition were observed; brownish discoloration and death of leaf sheath, growth inhibition in culm length, number of panicles and grains, grain ripening and rice yield. But these growth inhibition was greatly alleviated by the application of artificial zeolite, therefore, rice yield increased $1.1{\sim}3.2$ times according to the metal kind. In addition, the concentration of heavy metals in the brown rice also lowered by $27{\sim}75%$. Artificial Granular Zeolites (AGZ) was developed for the purification of wastewater. Canon exchange capacity was 126.8 $cmol^+{\cdot}kg^{-1}$. AGZ had Na-Pl peaks mainly with some minor $C_3S$ peaks in X-ray diffractogram. In addition, AGZs had various pore structure that may be adhere the suspended solid and offer microbiological niche to decompose organic pollutants. AGZ could remove ammonium, orthophosphate and heavy metals simultaneously. Mixing ratio of artificial zeolite in AGZs was related positively with removal efficiency of $NH_4\;^+$ and negatively with that of $PO_4\;^{3-}$. Root growth of rice seedling was inhibited severely in the mine wastewater because of strong acidity and high concentration of heavy metals. As AGZ(1 kg) stayed in the wastewater(100L) for 4days, water quality turned into safely for agricultural usage and rice seedlings grew normally.

  • PDF

불량 매립지 오염평가를 위한 지구물리 탐사 사례연구 (Environmental Geophysical Survey of Abandoned Landfills for Contamination Evaluation: A Case Study)

  • 이성순;이진용;윤희성;이강근;김창균;유영철
    • 대한환경공학회지
    • /
    • 제28권5호
    • /
    • pp.463-471
    • /
    • 2006
  • 본 연구에서는 충남 천안시와 강원도 원주시에 위치한 불량매립지 일대에 대해 지구물리 탐사 중 전기비저항 탐사를 실시하였으며, 수집된 자료를 이용하여 2차원과 3차원 비저항 역산 모델링을 수행하여 매립지 주변 지질구조와 침출수 오염영역, 침출수 유동을 평가하였다. 천안 직산매립지는 매립지가 논 상부에 위치하고 있으며 매립지로부터 침출수로 인한 농지 오염의 가능성이 있어 물리탐사 측선 배열을 매립지를 기준으로 서로 교차하는 측선배열을 수행하였다. 원주 매립지의 경우 매립지와 주변 논밭의 경계가 매립지 옹벽으로 나뉘며, 매립지 경계로부터 침출수 침전시설이 위치하고 있으나 현재는 방치된 상태로 침출수 누출로 인한 농지 오염의 가능성이 있다. 이에 총 4개 측선에 대해 3개 측선은 매립지 경계로부터 일정거리를 두고 평행하게 배열을 하였으며, 나머지 한 개 측선은 이 3개 측선을 교차하도록 배열하였다. 2차원 비저항 역산모델을 수행한 결과 천안매립지의 경우 침출수가 외부 논으로 확대되지 않고 매립지 내부에 정체된 형태로 존재하는 것으로 평가되었다. 이는 지하수 관측정 정기 수질분석시 측정된 지하수의 전기전도도 값의 분포에서도 확인할 수 있다. 원주 매립지의 경우는 매립지로부터 유래된 침출수가 매립지 경계 부근 폐기된 침출수 처리시설 밑으로 흐르는 것으로 평가되었고, 매립지 주변 기존 저수지였던 곳에서는 매립지 주변에 위치한 계곡의 영향으로 계곡에서 흘러드는 지하수에 의한 흐름과 과거 저수지의 영향으로 지표 근처에서 낮은 비저항대를 형성하는 것을 확인할 수 있었다. 또한 저수지 제방에서는 하부 $7{\sim}8m$ 심도에서 지하수가 논으로 유입되는 것으로 추정되었다. 이하의 반응온도 기준으로 약 $10{\sim}80%$ 이상이었다. 따라서, CVOCs 제거반응을 위하여 널리 사용되고 있는 단일 $CrO_x/Al_2O_3$ 촉매보다는 $CrO_x$의 사용량을 최소화하면서도 우수한 반응활성을 얻을 수 있는 $CrO_x/TiO_2$-based복합 산화물 촉매가 보다 바람직하며 하나의 대안적인 촉매 디자인 방법으로 응용될 수 있을 것으로 생각된다.EX>을 효과적으로 처리할 수 있었다.문에, 이 연구에서 개발된 수치모델은 퇴적물에서 일어나는 미량 오염 물질의 거동을 파악하기 위해 유용하게 사용되어질 수 있을 것으로 사료된다.

환원처리가 Ba-ferrite의 물성에 미치는 영향 (The Effect of Hydrogen Reduction Treatment on Properties of Ba-ferrite)

  • 홍양기;정홍식;김현준
    • 한국자기학회지
    • /
    • 제7권1호
    • /
    • pp.25-30
    • /
    • 1997
  • 치환형 Ba-ferrite의 수소환원 거동은 순수한 Ba-ferrite와는 다르게 나타났다. 환원온도 250 .deg. C에서 520 .deg. C의 범위에서 치환형 Ba-ferrite의 보자력은 증가하다가 다시 감소하는 반면에 순수한 Ba-ferrite는 계속 감소 하였다. 치환형 Ba-ferrite의 환원과정은 환원되는 정도에 따라 3단계로 나뉘어진다. 1과 2단계에서 Ba-ferrite의 구조는 그대로 유지를 하지만 자기적 성질은 다르게 나타났다. 1단계에서 보자력은 증가하고 산화처리시 가역적이지만, 2단계에서는 보자력이 더욱 증가하고 산화처리시 비가역적이었다. 그러나 3단계에서는 Ba-ferrite 구조 자체가 붕괴되어 .alpha. -Fe와 소량의 BaFe $O_{3-x}$의 생성으로 $H_{c}$는 크게 감소하고 포화자화값은 130 emu/g으로 크게 증가하였다. 이 때 보자력 분포도는 크게 넓어지며 입자크기도 감소하였다. 또한 치환이온들은 환원과정에서 Ba-ferrite 구조의 붕괴를 억제하였으며, 2a + 4 $f_{IV}$ , 2b 및 12k 자리의 치환이온들이 4 $f_{VI}$ 와 12k'의 자리로 이동함을 확인하였다. 따라서 1과 2단계에서의 보자력 증가원인은 치환이온의 자리이동에 따른 고보자력 상의 생성 때문이었다.

  • PDF

다층 PNN-PZT/Ag 복합체의 동시 소성을 위한 압전세라믹스의 저온소결 및 압전특성 평가

  • 이명우;손용호;김성진;윤만순;류성림;권순용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.295-295
    • /
    • 2007
  • 기계적 에너지를 전기적 에너지로 변화하는 에너지 변환소자인 압전 세라믹스는 액츄에이터, 변압기, 초음파모터, 초음파 소자 및 각종 센서로 응용되고 있으며, 그 응용분야는 크게 증가하고 있다. 최근 이러한 에너지 변화 소자는 앞으로 도래하는 ubiquitous, 무선 모바일 시대의 휴대용 전자제품, robotics, 항공우주, 자동차, 의료, 건축, MEMS 분야 등의 대체 에너지원으로 응용하기 위한 연구가 진행되고 있다. 특히 인간의 동작 등과 같은 일상적인 동작으로 필요한 전력을 얻을 수 있고, 세라믹 소자를 이용하기 때문에 전자노이즈가 발생되지 않을 뿐 아니라 반영구적으로 사용할 수가 있어서, 기존 이차전지, 연료전지를 대체 또는 보완 할 수 있는 방안도 검토되고 있다. PZT계 세라믹스는 높은 유전상수와 압전특성으로 전자세라믹스분야에서 가장 널리 사용되어지고 있지만 $1200^{\circ}C$이상의 높은 소결온도 때문에 $1000^{\circ}C$ 부근에서 급격히 휘발되는 PbO로 인한 환경오염과 기본조성의 변화로 인한 압전 특성의 저하가 문제시되고 있다. 또한, 적층 세라믹스의 제작 시 구조적 특성상 내부 전극이 도포된 상태에서 동시 소결이 필요한데, 융점이 낮은 Ag전극 대신 값비싼 Pd나 Pt가 다량 함유된 Ag/Pd, Ag/Pt 전극이 사용되고 있어 경제적인 문제가 발생하게 된다. 따라서 순수 Ag 전극을 사용하거나, Ag의 비율이 높은 내부 전극을 사용하기 위해서는 $950^{\circ}C$ 이하에서 소결되는 압전 세라믹스를 개발 하는 것이 필요하다. 따라서 본 연구에서는 압전특성이 우수한 $(Pb_{1-x}Cd_x)\;[(Ni_{1/3}/Nb_{2/3})_{0.25}Zr_{0.35}Ti_{0.4}]O_3$계의 조성을 설계하여, 소결온도를 낮추기 위해서 2단계 하소법을 이용하였다. 분말을 ball milling을 통해 24시간 동안 혼합하였다. 혼합된 분말은 $800^{\circ}C$에서 2시간 동안 하소하였다. 하소한 분말을 72시간 동안 ball milling 하여 최종 분말을 얻었다. 최종 분말에 PVB를 첨가하여 ${\Phi}21$ disk 형태로 성형한 후, $800{\sim}950^{\circ}C$ 소결을 하였다. 최종 분말 및 소결된 시편을 XRD분석을 통하여 상을 확인하였고, SEM을 이용하여 미세조직을 관찰하였다. 전기적 특성을 확인하기 위하여 두께 1mm로 연마한 시편에 Ag 전극을 도포하여 열처리한 후, 분극 처리하였다. 압전특성은 $d_{33}$ 미터로 측정하였고, impedance analyzer를 이용하여 주파수 및 impedance 특성을 측정하였다. 그 결과 $900^{\circ}C$에서 우수한 압전 특성 및 전기적 특성을 확보 할 수 있었다.

  • PDF

명대의가(明代醫家)들의 두통(頭痛)에 대한 인식변화에 관한 연구 (The Historical Study of Headache in Chinese Ming Dynasty)

  • 전덕봉;맹웅재;김남일
    • 한국의사학회지
    • /
    • 제24권1호
    • /
    • pp.43-56
    • /
    • 2011
  • Everyone once in a life experience headaches as symptoms are very common. According to a study in a country of more than a week and as many as those who have experienced a headache amounts to 69.4%. In addition, the high reported prevalence of migraine in 30s for 80% of all migraine sufferers daily life interfere with work or was affected. In Western medicine, the cause of headaches is traction or deformation of pain induced tissue like scalp, subcutaneous tissue, muscle, fascia, extracranial arteriovenous, nerves, periosteum. But it turns out there are not cause why pain induced tissue is being tracted or deformated. Therefore, most of the western-therapy is mainly conducted with regimen for a temporary symptom reduction. Therefore, I examined how it has been developed in Chinese Ming Dynasty, the perception of headache, change in disease stage and an etiological cause. Oriental medicine in the treatment of headache is a more fundamental way to have an excellent treatment. The recognition of head in "素問($s{\grave{u}}$ $w{\grave{e}}n$)" and "靈樞($l{\acute{i}}ng$ $sh{\bar{u}}$)" began to appear in 'Soul-神($sh{\acute{e}}n$) dwelling place' and 'where to gather all the Yang-'諸陽之會($zh{\bar{u}}$ $y{\acute{a}}ng$ $zh{\bar{i}}$ $hu{\grave{i}}$)'. Also, head was recognized as '六腑($li{\grave{u}}f{\check{u}}$) 淸陽之氣($q{\bar{i}}ng$ $y{\acute{a}}ng$ $zh{\bar{i}}$ $q{\grave{i}}$) and 五臟($w{\check{u}}$ $z{\grave{a}}ng$) 精血($j{\bar{i}}ng$ $xu{\grave{e}}$) gathering place'. More specific structures such as the brain is considered a sea of marrow(髓海-$su{\check{i}}$ $h{\check{a}}i$) in "內經($n{\grave{e}}i$ $j{\bar{i}}ng$)" and came to recognized place where a stroke occurs. Accompanying development of the recognition about head, there had been changed about the perception of headache and the recognition of the cause and mechanism of headache. And the recognition of headache began to be completed in Ming Dynasty through Jin, Yuan Dynasty. Chinese Ming Dynasty, specially 樓英($l{\acute{o}}u$ $y{\bar{i}}ng$), in "醫學綱目($y{\bar{i}}xu{\acute{e}}$ $g{\bar{a}}ngm{\grave{u}}$)", first enumerated prescription in detail by separating postpartum headache. and proposed treatment of headache especially due to postpartum sepsis(敗血-$b{\grave{a}}i$ $xu{\grave{e}}$). 許浚($x{\check{u}}$ $j{\grave{u}}n$) accepted a variety of views without impartial opinion in explaining one kind of headache in "東醫寶鑑($d{\bar{o}}ng-y{\bar{i}}$ $b{\check{a}}oji{\grave{a}}n)$" 張景岳($zh{\bar{a}}ng$ $j{\check{i}}ng$ $yu{\grave{e}}$), in "景岳全書($j{\check{i}}ng$ $yu{\grave{e}}$ $qu{\acute{a}}nsh{\bar{u}}$)", established his own unique classification system-新舊表裏($x{\bar{i}}nji{\grave{u}}$ $bi{\check{a}}ol{\check{i}}$)-, and offered a clear way even in treatment. Acupuncture treatment of headache in the choice of meridian has been developed as a single acupuncture point. Using the classification of headache to come for future generation as a way of locating acupoints were developed. Chinese Ming Dynasty, there are special treatments like 導引按蹻法($d{\check{a}}o$ y ${\check{i}}n$ ${\grave{a}}n$ $ji{\check{a}}o$ $f{\check{a}}$), 搐鼻法($ch{\grave{u}}$ $b{\acute{i}}$ $f{\check{a}})$, 吐法($t{\check{u}}$ $f{\check{a}}$), 外貼法($w{\grave{a}}i$ $ti{\bar{e}}$ $f{\check{a}}$), 熨法($y{\grave{u}}n$ $f{\check{a}}$), 點眼法($di{\check{a}}n$ $y{\check{a}}n$ $f{\check{a}}$), 熏蒸法($x{\bar{u}}nzh{\bar{e}}ng$ $f{\check{a}}$), 香氣療法($xi{\bar{a}}ngq{\grave{i}}$ $li{\acute{a}}of{\check{a}}$). Most of this therapy in the treatment of headache, it is not used here, but if you use a good fit for today's environment can make a difference.

비차폐 환경에서의 고온초전도 SQUID 2차 미분기의 특성연구 (High-$T_c$ 2nd-order SQUID Gradiometer for Use in Unshielded Environments)

  • 박승문;강찬석;이순걸;유권규;김인선;박용기
    • Progress in Superconductivity
    • /
    • 제5권1호
    • /
    • pp.50-54
    • /
    • 2003
  • We have fabricated $∂^2$$B_{z}$ /$∂x^2$ type planar gradiometers and studied their properties in operation under various field conditions. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ (100) substrate by a pulsed laser deposition (PLD) system and patterned into a device by the photolithography with ion milling technique. The device consists of 3 pickup loops designed symmetrically Inner dimension and the width of the square side loops are 3.6 mm and 1.2 mm, respectively, and the corresponding dimensions of the center loop are 2.0 mm and 1.13 mm. The length of baseline gradiometer is 5.8 mm. Step-edge junction width is 3.0 $\mu\textrm{m}$ and the hole size of the SQUID loop is 3 $\mu\textrm{m}$ ${\times}$ 52 $\mu\textrm{m}$. The SQUID inductance is estimated to be 35 pH. The device was formed on a 20 mm ${\times}$ 10 mm substrate. We have tested the behavior of the device in various field conditions. The unshielded gradiometer was stable under extremely hostile conditions on a laboratory bench. Noise level 0.45 pT/$\textrm{cm}^2$/(equation omitted)Hz and 0.84 pT/$\textrm{cm}^2$/(equation omitted)Hz at 1 Hz for the shielded and the unshielded cases, which correspond to equivalent field noises of 150 fT/(equation omitted)Hz and 280 fT/(equation omitted)Hz, respectively. In spite of the short baseline of 5.8 mm, the high common-mode-rejection-ratio of the gradiometer, $10^3$, allowed us to successfully record magnetocardiogram of a human subject, which demonstrates the feasibility of the design in biomagnetic studies.

  • PDF