• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.377-392
• /
• 2012

작은 고체 분체들은 피커링 유화 체계에서 안정화제로 작용하는 것은 이미 알려진 사실이다. 이 연구에서 우리는 알킬실란 처리 $TiO_2$와 n-헥실알코올, 수계로 안정한 피커링 에멀젼을 제조하였다. $TiO_2$ 입자에 의해 안정화된 피커링 에멀젼을 제조하기 위한 최적의 조건은 $TiO_2$ 입자의 양과 수상/유상의 비에 의해 결정된다. 피커링 에멀젼의 형태는 물과 n-헥실알코올에 대한 입자들의 젖음성에 의존된다. 피커링 에멀젼은 $TiO_2$가 5.00 wt%, 오일과 수상의 비가 3 : 7인 경우에 가장 안정하였다. 피커링 에멀젼을 형판으로 하여 무기 전조체를 졸-겔 공정에 의해 다공성 분체들이 합성되었다. 합성된 다공성 분체들은 광학 현미경, SEM, BET, XRD 및 EDS에 의해 확인되었다.

• 대한기계학회논문집B
• /
• 제33권3호
• /
• pp.186-193
• /
• 2009

In this article, the effect of silica addition on the phase transformation characteristics of $TiO_2$ nanoparticles synthesized by using an $O_2$-enriched coflow, hydrogen, diffusion flame was investigated. TTIP(titanium tetra-isopropoxide) and TEOS(tetraethyl-orthosilicate) were used as precursors for $TiO_2$ and $SiO_2$ nanoparticles, respectively. Based on the results from TEM and XRD analysis, it is believed that the silica addition on the flame synthesis of $TiO_2$ nanoparticles reduces the particle size distribution and raises the temperature of the phase transition from anatase to rutile. But the reduced sizes of the synthesized particles due to the silica addition made the sintering and phase transformation of particles more easily.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.3-9
• /
• 1993

For comparison, we used Ca and Mg as reducers to produce TiFe hydrogen stroage alloy from Fe and TiO$_2$by the Reduction-Diffusion process. The results obtained were as follow. \circled1 Ca was found to be effective both for reduction and diffusion processes. Moreover, Ca oxide was easily removed in an NH$_4$Cl solution after the reaction. \circled2 In the case of using Ca as a reducer, the Reduction-Diffusion process is considered to take place in the foiling three steps. First, TiO$_2$is reduced to Ti by Ca over 100$0^{\circ}C$. Second, the atomic Ti drifts in the Ca melt and meets Fe particles. Finally, the atomic Ti diffuses in to the Fe particles. \circled3 In the case of using Mg as a reducer, We found that the reduction reaction of TiO$_2$went well. But the reduced Ti scarcely diffused into Fe particles. This was probably because no Mg melt was formed due to the high vapor pressure of Mg.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.38-44
• /
• 2002

여러 종류의 전해질이 존재할 때, 수계 및 비수계 분산매체에서 저온균일침전법으로 제조된 침상형태의 일차입자를 갖는 나노 크기의 루틸상 TiO$_2$분말에 대한 분산 안정성을 조사하였다. 제타전위 측정은 수계 및 비수계 분산매체에 전해질 첨가가 TiO$_2$입자 표면의 전위 역전을 유발하는 것을 보여주었다. 비수계 분산매체에 분산되어 있는 TiO$_2$입자 사이에 작용하는 정전기적 반발력은 수계 분산매체에서보다 크게 관찰되었고, 이것은 점도, 유전 상수와 같은 유기 용매의 물리적 특성과 밀접한 연관이 있음을 알 수 있었다. pH, 전해질의 농도와 이온의 원자가는 TiO$_2$입자의 표면전위를 크게 변화시켰고, TiO$_2$입자의 분산 거동을 사실상 주도하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2637-2643
• /
• 2010

In order to develop a new line injection system for spin draw yarn (FD SDY) fibers, the effect of various parameters in extrusion and melt line conditions on the dispersion and distribution of $TiO_2$ particles within FD PET fibers was investigated. As a result, the dispersibility of $TiO_2$ particles in a PET matrix is found to depend on the particle size and its surface characteristics. Surface modification of $TiO_2$ by dimethyl polysiloxane resulted in the improved dispersibility and affinity of $TiO_2$ particles in the PET matrix. Especially, residence time, mixing temperature, and mixing shear rate in the new line injection system under the SDY spinning process were very important parameters to minimize the agglomeration of $TiO_2$ particles. The FD SDY prepared by the new line injection system was superior to those using the polymerization process and the conventional masterbatch chip dosing process in the color-L and color-b values of the fibers.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.306-314
• /
• 2005

In this study, spherical $pre-BaTiO_3$ particles are prepared by gelation and aging process in autoclave without catalysts. The (Ba-Ti) gel used as a starting material was prepared by aging mixtures of titanyl acylate with barium acetate aqueous solution([glacial acetic acid (AcOH)]/[titanium isopropoxide (TIP)] 4, [barium acetate]/[TIP] 1) at $45^{\circ}C$ for 48hrs. XRD and SEM results for the (Ba-Ti) gel sample at aging process showed that the gel was formed via aggregation of the fine particles. It seems to be the primary particles of bulk (Ba-Ti) gel amorphous, but the spatial arrangement of barium and titanium in the (Ba-Ti) gel is similar to that in crystalline $BaTiO_3$ particles. From XRD and FT-IR. spectroscopy analysis it was found that the crystal structure of the prepared particles continuously transformed from amorphous to tetragonal as the calcination temperature increased, and crystallized spherical cubic and tetragonal $BaTiO_3$ powder obtained at the very low calcination temperature between $500^{\circ}C$ and $900^{\circ}C$ after 1hrs of heat treatment respectively. According to BET analysis result, final particle have pore structure of ink bottle shape which is produced by aggregation of fine spherical particles with surface area of $280m^2/g$ and average pore size of 130nm.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1175-1182
• /
• 2001

Chemical compositions of polydisperse SiO$_2$/TiO$_2$multicomponent aggregates were measured for different heights from the burner surface and different mobility diameters of aggregates. SiO$_2$/TiO$_2$multicomponent particles were generated in a hydrogen/oxygen coflow diffusion flame from two sets of precursors: TTIP(titanium tetraisopropoxide), TEOS(tetraethylorthosilicate). To maintain 1:1 mole ratio of TTIP:TEOS vapor, flow rate of carrier gas $N_2$was fixed at 0.6lpm for TTIP, at 0.1lpm for TEOS. In-situ sampling probe was used to supply particles into DMA(differential mobility analyzer) which was calibrated with using commercial DMA(TSI, model 3071A) and classifying monodisperse multicomponent particles. Classified monodisperse particles were collected with electrophoretic collector. The distributions of composition from particles to particle were determined using EDS(energy dispersive spectrometry) coupled with TEM(transmission electron microscope). The chemical(atomic) compositions of classified monodisperse particle were obtained for different heights; z=40mm, 60mm, 80mm. The results suggested that the chemical(atomic) composition of SiO$_2$decreased with the height from burner surface and the composition of SiO$_2$and TiO$_2$approached to the value of 1 to 1 fat downstream. It is also found that the composition of SiO$_2$decreases as the mobility diameter of aggregate increases.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.1001-1004
• /
• 2011

The formation of TiC and $Al_2O_3$ particles based on the self-combustion reaction of the $Al-TiO_2-C-CuO$ system in an Al alloy melt was investigated. With an adequate amount of CuO in the system, a spontaneous reaction occurred within the Al alloy melt at $850^{\circ}C$ and thereafter was self-maintained, producing an Al matrix composite reinforced with thermodynamically stable TiC and $Al_2O_3$ particles. TiC and $Al_2O_3$ particles contributed to a considerable increase in the strength and stiffness, demonstrating the feasibility of this method as a practical application for structural parts.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.83-89
• /
• 2004

본 연구에서는 우수한 생체적합성과 높은 기계적 성질을 갖는 아파타이트 생체세라믹스를 제조하기 위하여 수산화아파타이트(HA, $Ca_{10}(PO_4)_6(OH)_2/TiO_2$ 생체복합분말을 제조하였다. HA/$TiO_2$ 생체복합분말은 침전법과 졸겔법으로 각각 제조된 $TiO_2$ 분말과 수열합성법으로 제조된 HA 분말을 1:1의 무게분율로 혼합하여 제조하였다. HA/$TiO_2$ 생체복합분말은 $TiO_2$와 HA 입자의 크기와 모양에 따라 미세구조의 차이를 나타냈으며, $TiO_2$와 HA의 입자 크기가 서로 다른 복합분말의 경우, 작은 입자는 큰 입자의 표면에 둘러싸고 있었으나, $TiO_2$와 HA의 입자 크기가 비슷한 복합분말의 경우, $TiO_2$와 HA 입자가 서로 분산되어 균일한 미세구조를 가지고 있었다 균질한 미세구조를 갖는 복합분말은 소결체 제조 시 높은-소결밀도와 우수한 기계적 특성을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1881-1884
• /
• 2003

In this experiment, the oxidations of p-Xylene (140-180 ppmv), one of the air pollutants as a VOC, using $UV/TiO_2$ photocatalyst is studied. In order to increase the specific surface area, the filter is coated by nano $TiO_2$ particles. The photodegradation system consists of a VOCs generator, a photocatalyst filter and a measuring equipment. Illumination is generally provided by two of 20 W black light lamps with 380 nm of wavelength. The filter coated by nano $TiO_2$ particles has a passing efficiency over 80% but a pressure drop of 9.0 $mmH_2O$ at 0.45 cm/s. The filter endurance is better than activated carbon at the same pressure drop.