• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.133-138
• /
• 2004

The photodegradation of phenol and toluene with the $TiO_2$-coated polyethylene (PE) particles were investigated in the slurry type photocatalytic reactor, changing the $TiO_2$ particle sizes, initial phenol and toluene concentrations, and the oxygen flow rate. The nano-sized $TiO_2$ photocatalyst particles were prepared by the diffusion flame reactor and they were coated onto PE particles by using the hybridization system for the efficient recollection of $TiO_2$-coated particles after photodegradation experiments. The degradation efficiencies of phenol and toluene with the $TiO_2$-coated PE particles were more than 90% after photodegradation of 80 minutes for most cases. The efficiencies of photodegradation with the $TiO_2$-coated PE particles were found to be lower than those by the pure $TiO_2$ particles by 50%, because of the decrease in specific surface area of $TiO_2$ particles in PE particles.

• Particle and aerosol research
• /
• v.7 no.3
• /
• pp.79-85
• /
• 2011

Porous $TiO_2-SiO_2$ particles were synthesized by co-assembly of nanoparticles of $TiO_2$ and $SiO_2$ in evaporating aerosol droplets. Poly styrene latex (PSL) particles were employed as a template of porous particles. Flowrate of dispersion gas, weight ratio of $TiO_2/SiO_2$ and $SiO_2$ concentration in the precursor, and PSL size were chosen as process variables. The morphology, crystal structure, chemical bonding, and pore size distribution were analyzed by FE-SEM, XRD, FT-IR, BET. The morphology of porous $TiO_2-SiO_2$ particles was spherical and the average particle size range were from 1 to $10{\mu}m$. The particles were composed of meso and macro pores. The average particle diameter and pore volume of the as prepared particles were dependant on process variables. It was found that UV-Vis absorption of the porous particles was comparable with pure $TiO_2$ nanoparticles even though $TiO_2/SiO_2$ ratio is low in the porous particles.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.273-278
• /
• 2001

In this study, we prepared nano-sized $TiO_2$ particles for various process variables by the diffusion flame reactor and we collected $TiO_2$ particles by thermophoresis. It is found that the size of $TiO_2$ particles increases, as the flame temperature or the inlet $TiCl_4$ concentration increase or the total gas flow rate decreases. We investigated the photo-degradation of phenol wish the prepared $TiO_2$ particles. We found the optimum amounts of $TiO_2$ photocatalysts for our experimental apparatus and investigated the photo-degradation efficiencies of phenol, changing the process variables such as size of $TiO_2$ photocatlysts, phase ratio of rutile/anatase, concentration of phenol, input ratio of $O_2$. Degradation efficiencies of phenol were almost 95% in 15 minutes for the standard conditions of our experiments.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.52-56
• /
• 2006

Some of factors affecting photo-conversion efficiency of dye sensitized solar cells (DSCs) are discussed in terms of $TiO_2$ electrodes. The first topic is on the surface modification of $TiO_2$ nano-particles, which is associated with electron traps on the surface of $TiO_2$ nano-particles. The surface is modified with dye molecules under pressurized $CO_2$ atmosphere to increase the surface coverage of $TiO_2$ nano-particles with dye molecules. This increases Jsc because of an increase in the amount of dye molecules and a decrease in the amount of trapping sites on $TiO_2$ nano-particles. In addition, the decrease in the amount of trap sites increases Voc because decreases in Voc are brought about by the recombination of $I_2$ molecules with electrons trapped on the $TiO_2$ surfaces. Selective staining for tandem cells is proposed. The second topic is on the contact between a $SnO_2$/F transparent conductive layer (TCL) and nano-particles. Polishing the TCL surfaces with silica nano-particles increases the contact, resulting in Jsc increases. The third topic is the fabrication of ion-paths in $TiO_2$ layers. Electro-spray coating of $TiO_2$ nano-particles onto TCL is shown to be effective for fabricating ion-paths in $TiO_2$ layers, which increases Jsc.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.49-54
• /
• 1998

$BaTiO_3$ fine particles were synthesized by hydrothermal method. $TiO_2$ and $Ba(OH)_2{\cdot}8H_2O$ were used as staring materials, and it was possible to synthesize $BaTiO_3$ fine particles in pure water by using excess $Ba(OH)_2{\cdot}8H_2O$. The shape of synthesized particles are irregular but near spherical, and the particle size depends on the temperature and Ba/Ti atomic ratio.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.117-124
• /
• 2002

We prepared the nano-sized $TiO_2$ particles by the diffusion flame reactor and investigated the effects of several process variables on the generation and transport properties of $TiO_2$ particle. As the length from the tip of diffusion flame reactor increases, the size of $TiO_2$ particle increases by the coagulation between particles. The structure of $TiO_2$ particles prepared is almost found to be anatase. It was found that the $TiO_2$ particle size depends more largely on the change of reactor temperature than on the change of inlet $TiCl_4$ concentration. By the photo-degradation experiment of phenol and toluene with the prepared $TiO_2$ particles, we found that the photo-degradation efficiencies of phenol and toluene change, depending on the process variables such as size of $TiO_2$ photocatlysts, concentration of phenol or toluene. Degradation efficiencies of phenol and toluene was above 90% in our experiments in 60 minutes.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.52-69
• /
• 1996

Nano-Sized TiO$_2$ particles with diameter between 2 and 5 nm are synthesized in Water/Triton X-100/n-Hexane microemulsion. Particles show the amorphous structure and partially hydroxide form. The optical absorbance of particles appears at 250nm and band edge at 340nm. Gold metal is deposited on the surface of TiO$_2$ particles by reduction reaction of Au(III) ion with sodium hypophosphite. The size of gold-deposited particles is 20nm, and the optical absorbance appears at 270nm and at 550nm. So particles show the red color. The dense precipitation is formed by aggregation in the TiO$_2$ nano-sized particles of about 5nm size. But the bulky precipitation is formed by agglomeration phenomena in the gold-deposited particles of 20nm size. And also gold-deposited particles is easily dispersed by being re-dispersed in PEG/Water solution. This study has compared those things measuring the SPF characteristics of the cosmetics made of the synthesized particles. If the particle size is controlled appropriately, then the SPF value will be higher, or more colorless cosmetics will be made.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.825-827
• /
• 2002

The polymer encapsulation of white inorganic $TiO_2$ pigment particles was prepared by a two stage dispersion polymerization technique for applications in electrophoretic displays (EPDs). In order to give functionality for inorganic pigment particles in the EPD, we have investigated the density of the polymer encapsulated $TiO_2$ particles. The average density of the polymer encapsulated $TiO_2$ particles was 2.2 at 25$^{\circ}C$. The average density of the polymer encapsulated $TiO_2$ particles is suitable to 1.7, due to density matching with suspending media. Therefore, we will attempt density compatibility of dispersion polymerization technique for encapsulation of $TiO_2$ particles in suspending media.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.37-44
• /
• 1995

TiO2 fine powders were synthesized using oxygenolysis and hydrolysis reaction of TiCl4 vapor in gas phase. The TiO2 powder synthesized showed morphological differences depending on reaction system as follows: TiCl4-O2 reaction system produced the monosized particles having polyhedral shape with well-defined crystal planes and the particles did not agglomerate into secondary particles. TiCl4-H2O reaction system, whereas, produced the spherical secondary particles which consisted of fine primary particles. Other powder characteristics such as particle size, impurity content and rutile content are also reported in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.69-70
• /
• 2023

The development of advanced 3D printing technologies has opened up new opportunities for customized digital designs in the construction industry. Using nano- and micro-scale additives is expected to improve the performance of cement-based materials in 3D printing. TiO₂ particles have been widely used as reinforcing additives in cement-based materials. Therefore, this study aims to investigate the application of cement-based materials containing multi-size TiO₂ particles in binder jet 3D printing and the effect of different-size TiO₂ particles on the performance of printed samples. TiO₂ particles exhibit an excellent filling effect, which increases the density of the printed samples and promotes hydration, thereby improving the compressive strength of the samples. In addition, larger TiO₂ particles exert more pronounced filling and photocatalytic effects on the resulting samples.