• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.319-319
• /
• 2012

수용액에서 양극산화법을 이용하여 티타늄 표면에 $TiO_2$ 나노튜브를 형성시켰고, XRD 및 전자현미경을 통해 열처리를 한 $TiO_2$ 나노튜브 소재표면, 계면구조를 관찰하였으며, 이는 향후 나노튜브의 결정구조를 제어할 수 있는 자료로 활용 될 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.159-164
• /
• 2008

Two kinds of CNT/TiO2 composite photocatalysts were synthesized with multi-walled carbon nanotubes (MWCNTs) and titanium(IV) n-butoxide (TNB) by a MCPBA oxidation method. Since MWCNTs had charge transfer and semiconducting, the CNT/TiO2 composite shows a good photo-degradation activity. The XRD patterns reveal that only anatase phase can be identified for MCT composite, but the HMCT composite synthesized with HCl treatment was observed the mixed phase of anatase and rutile. The EDX spectra were shown the presence as major elements of Ti with strong peaks. From the SEM results, the sample MCT and HMCT synthesized by the thermal decomposition with TNB show a homogenous sample with only individual MWCNTs covered with TiO2 without any jam-like aggregates between CNTs and TiO2. From the photocatalytic results, we could be suggested that the excellent activity of the CNT/TiO2 composites for organic dye and UV irradiation time could be attributed to combination effects between TiO2 and MWCNTs with plausible photodegradation mechanism.

• 공업화학
• /
• 제26권2호
• /
• pp.121-127
• /
• 2015

전기화학적 양극산화 기법으로 제조한 타이타늄 나노튜브는 타이타늄 특유의 강한 화학내구성 및 나노튜브의 높은 종횡비로 인하여 넓은 범위에 응용된 소재이다. 전해질의 구성 성분과 종류, pH, 전압, 온도 그리고 양극산화 시간이 타이타늄 나노튜브의 성상을 결정짓는 요소들이며 도핑을 통해 촉매능을 부여할 수 있다. 비금속 및 금속 원소 모두 도핑 가능하며 도핑 방법 역시 다양하다. 도핑 방법에는 합금 양극산화, 열처리법, 함침법, 전기도금법 등 다양한 방법들이 이용되며 점차 간단하고 빠른 도핑 방법을 찾는 방향으로 연구가 진행되고 있다. 본 총설에서는 타이타늄 나노튜브의 생성 원리와 상용된 제법들에 관하여 기술하고 도핑과 그 응용 및 최근의 도핑 연구 동향을 다루도록 하겠다.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.234-241
• /
• 2009

In this study, CNT/$TiO_2$ composites derived from various titanium alkoxides and multiwalled carbon nanotubes (MWCNTs) were synthesized and characterized. Surface areas and pore volumes of the CNT/$TiO_2$ samples showed catastrophic decrease due to deposition of titanium compounds. Scanning electron microscopy (SEM) results indicated that the MWCNTs were homogenously decorated and well-dispersed onto/into the composites without apparent agglomeration of $TiO_2$ particles. In the X-ray diffraction (XRD) patterns, peaks of anatase and rutile phase were observed. The energy dispersive X-ray spectroscopy (EDX) spectra revealed the presence of major elements such as C and O with strong Ti peaks. According to the photocatalytic results, MB removal by a treatment with CNT/$TiO_2$ composites seems to have an excellent removal effect as order of CTIP, CTNB and CTPP composites due to a photolysis of the supported $TiO_2$, the radical reaction and the adsorptivity and absorptivity of the MWCNTs.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.279-284
• /
• 2017

The formation mechanism and photocatalytic properties of a multiwalled carbon nanotube (MWCNT)/$TiO_2$-based nanotube (TNTs) composite are investigated. The CNT/TNT composite is synthesized via a solution chemical route. It is confirmed that this 1-D nanotube composite has a core-shell nanotubular structure, where the TNT surrounds the CNT core. The photocatalytic activity investigated based on the methylene blue degradation test is superior to that of with pure TNT. The CNTs play two important roles in enhancing the photocatalytic activity. One is to act as a template to form the core-shell structure while titanate nanosheets are converted into nanotubes. The other is to act as an electron reservoir that facilitates charge separation and electron transfer from the TNT, thus decreasing the electron-hole recombination efficiency.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.260-261
• /
• 2014

$TiO_2$ nanotubes (TNT) synthesized by microwave-assisted hydrothermal method by using $TiO_2-P25$ as a precursor at hydrothermal temperature $150^{\circ}C$ in 4 hours. The concentration of alkaline solution is between 4M and 10M. Samples were characterized by X-ray diffraction (XRD), Raman spectroscopy (RS), Transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) and UV-vis DRS spectroscopy. The results demonstrated the effects of the alkali concentration to the formation of nanotubes. The photocatalytic activity was investigated by degradation of Methylene Blue (MB).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.372-372
• /
• 2007

Titanium oxide nanotube arrays were fabricated by the anodization of pure titanium thin film deposited at $500^{\circ}C$ on silicon substrates. The titania nanotubes were grown by anodization in nonaqueous-base electrolytes at different potentials between 5 V and 30 V. $TiO_2$ nanotube array with a small pore diameter of 40 nm and long titanium oxide layer of $4\;{\mu}m$ was obtained. The $TiO_2$ nanotube array was used as a porous electrode for quartz crystal microbalance (QCM). Nanoporous morphology of electrode will increase the sensitivity of microbalance.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.349-356
• /
• 2017

본 연구에서는 $TiO_2$ nanotube 광촉매의 고도산화처리능을 비교하기 위해서 OH 라디칼 생성력을 평가하고자 하였다. 자외선 조사에 따른 Probe compound인 4-Chlorobenzoic acid (pCBA)의 농도 감소에 따라 OH radical 생성량을 산정하는 방법으로 광촉매 효율을 평가하였는데, $TiO_2$ nanotube 표면에서의 전자의 흐름을 원활하게 하기 위하여 전기적 에너지를 주었을 시 광촉매 효율의 증가 가능성 또한 확인하고자 자외선 조사 시 전류밀도를 인가하는 방법으로 실험을 진행하였다. 실험에 사용된 $TiO_2$ nanotube는 전극효과를 부여하기 위해 양극산화법으로 티타늄판을 이용하여 제조하였으며, pCBA 용액에는 전도도를 부여하기 위하여 NaCl을 첨가하여 전해질로 사용하였다. 정전류 정전압 조건하에서 자외선조사 실험을 진행하였으며, 전류가 흐르는 광촉매에 자외선 조사 시 OH 라디칼 생성량은 광촉매 없이 자외선만 조사하였을 때에 비해 약 5.6배, $TiO_2$ 광촉매와 함께 자외선을 조사하였을 보다 약 2.2배 증가하였다. 결과적으로 광촉매반응에 전기적 에너지를 부여하였을 시 시너지효과를 가져올 수 있는 가능성을 확인할 수 있었다.

• 한국표면공학회지
• /
• 제53권4호
• /
• pp.153-159
• /
• 2020

Photocatalytic decomposition of polyethylene film with TiO₂ nanotube powders (NTs) was investigated under UV irradiation at ambient conditions. TiO₂ NTs composed of individual nanotubes are prepared by rapid breakdown anodization technique. A comparative study on the photocatalytic decomposition of polyethylene-TiO₂ composite films prepared using TiO₂ nanoparticles (NPs) or TiO₂ NTs (NTs), respectively, was conducted under UV irradiation. Polyethylene film incorporated with TiO₂ NTs showed 26 wt% weight loss after 200 h under UV irradiation about two times faster decomposition rate than TiO₂ NPs which is attributed to large surface area of TiO₂ NTs.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.95.2-95.2
• /
• 2017

Anodic TiO2 nanostructures have wide applications due to their various functional properties such as wide band-gap, chemical stability, and anti-corrosiveness. In order to enhance the properties, several approaches to fabricate TiO2 structures have been developed. Especially, TiO2 nanotube arrays prepared by anodization in a fluoride electrolyte show impressive properties for dye sensitized solar cells1 and photocatalyst. In this presentation, we introduce new types of TiO2 nanostructures beyond TiO2 nanotubes that are fabricated by anodization at high temperature in a glycerol/phosphate electrolyte. We show that depending on the anodization parameters different self-organized morphologies - of highly aligned, high aspect ratio oxide structures can be formed. Critical factor for growth and the use for dye sensitized solar cells and photocatalyst will be discussed.