• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.547-549
• /
• 2001

The dielectric constants and dielectric losses of ZrTiO$_4$thin films deposited by DC magnetron reactive sputtering were investigated. The paraelectric properties were measured in the 100kHz range. As the deposition temperature increased (up to 67$0^{\circ}C$), the dielectric losses (tan$\delta$) decreased (down to 0.017$\pm$0.007), while the dielectric constants ($\varepsilon$) were in the range of 35$\pm$7. Post annealing at 80$0^{\circ}C$ in oxygen for 2h reduced tan$\delta$ down to 0.005$\pm$0.001, higher than those of well-sintered bulk ZrTiO$_4$.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.62-67
• /
• 2006

Time-of-flight impact-collision ion scattering spectroscopy (TOF-ICISS) using 2 keV $He^+$ ion was applied to study the geometrical structure of the $BaTiO_3$ thin film which was grown on the MgO(100) surface. Hetero-epitaxial $BaTiO_3$ layers were formed on the MgO(100) surface by thermal evaporation of titanium followed first by oxidation at $400^{\circ}C$, subsequently by barium evaporation, and finally by annealing at $800^{\circ}C$. The atomic structure of $BaTiO_3$ layers was investigated by the scattering intensity variation of $He^+$ ions on TOF-ICISS and by the patterns of reflection high energy electron diffraction. The scattered ion intensity was measured along the <001> and <011> azimuth varying the incident angle. Our investigation revealed that perovskite structured $BaTiO_3$ layers were grown with a larger lattice parameter than that of the bulk phase on the MgO(100) surface.

• 한국대기환경학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2010

In this study, the selective catalytic reduction of $NO_x$ with ammonia was carried out in a filter bag support reactor. The experiments were performed by powder type $MnO_x$ and $V_2O_5$/$TiO_2$ catalyst at low temperature between 130 and $250^{\circ}C$. Also, the effect of $SO_2$ and $H_2O$ on the NO conversion was investigated under our test conditions. The powder type catalysts were analyzed by X-ray photoelectron spectrum (XPS), X-ray diffraction(XRD), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). It was observed that NO removal efficiency of the powder type $V_2O_5$/$TiO_2$ catalyst was 85% at low temperature($200^{\circ}C$) under presence of oxygen and that of $MnO_x$ was 50% at the same condition. The powder type $V_2O_5$/$TiO_2$ catalyst, in conclusion, was found to be available for SCR reaction in a filter bag support system.

• 한국진공학회지
• /
• 제8권2호
• /
• pp.111-115
• /
• 1999

The structural characteristics of an epitaxial $BaTiO_3$ film on MgO(001) grown by sputtering were studied as a function of temperature using in-situ, real time synchrotron x-ray scattering experiments. We found that the as-grown film was single c-domain but strained at room temperature and tetragonally distorted with the c-axis normal to the film surface. Interestingly, its lattice parameters were found to be expanded in both the in-plane and the out-of -plane directions, i.e. biaxially, comparing with those of a bulk $BaTiO_3$ . More importantly, as it was heated up to $600^{\circ}C$, the tetragonal structure was kept up through without and any phase transition, which is usually observed in other epitaxial ferroelectric thin films.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.262-269
• /
• 2008

The aim of this study was to determine the effects of breeder age and stocking density on performance, carcass characteristics and some stress parameters (H-L ratio, serum glucose, cholesterol and triglyceride levels, tonic immobility test (TI), antibody production, relative asymmetry (RA) and external appearances). This experiment was carried out with 705 one-day old male broiler chicks (Ross 308) obtained from three different ages of broiler breeder (32, 48 and 61 wks). Each age group was randomly divided into two stocking density groups (11.9 and 17.5 broilers per $m^2$) with 5 replications per group. The experimental period was 6 weeks. Broilers from 32 wk-old breeders had lower initial weight (p<0.001), body weight gain of the first 3 week of rearing (p<0.01), the percentage of abdominal fat (p<0.001) and serum cholesterol level (p<0.01); higher percentage of gizzard (p<0.01) and longer TI duration (p<0.001) than those from 48 and 61 wk-old breeders. Broilers reared at 17.5 b/m2 had lower final BW, body weight gain, feed consumption, feather condition and foot health (p<0.001), higher percentage of heart, H-L ratio, serum glucose and cholesterol levels (p<0.001), and longer TI durations (p<0.001). There were no significant interactions in examined parameters except for feed to gain ratio between breeder age and stocking density.

• Environmental Engineering Research
• /
• 제7권1호
• /
• pp.1-9
• /
• 2002

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.162-162
• /
• 2003

최근에 산화물 인공격자의 우수한 특성으로 인하여 활발한 연구가 진행되고 있다. 본 연구에서는 펄스레이저 증착방법을 이용하여 산소분압 100mTorr, $650^{\circ}C$에서 LSCO/MgO 기판위에 La-50mol% 첨가된 SrTiO$_3$ (SLTO)와 SrTiO$_3$ 를 적층시켜 산화물 인공격자를 만들어 결정구조에 대하여 연구하였다. SrTiO$_3$ (STO)는 상온에서 3.904$\AA$인 cubic perovskite 구조를 가지고 있다. 일반적으로 La$^{3+}$ (1.14$\AA$)은 Sr$^{2+}$(1.12$\AA$)과 이온반경이 거의 유사하기 때문에 ABO 페로브스카이트 구조의 A자리에 치환될 것으로 기대되며 또한 Sr$^{2+}$ 자리에 La$^{3+}$ 가 치환되므로써 발생하는 charge compensation은 Sr 자리에 Vacancy 생성으로 판단된다. 인공격자의 성장확인을 위하여 SLTO와 STO를 10층씩 증착하여 XRD분석을 통하여 평가하여 보았다. 확인된 결과를 바탕으로 산화물 인공격자의 적층 주기를 SLTO layer를 한층으로 고정시키고 STO를 한 층에서 다섯 층까지 다양하게 변화시켰다. 본 연구의 목적은 산화물 인공격자에서 결정결함을 제어하여 소자에 응용할 수 있는 전기적 물성을 평가하기 위함이다. X-ray diffraction 결과 SLTO/STO 인공격자는 (001) 방향으로 우선배향하였으며 적층주기에 따라 격자상수의 변화를 보였다. AES의 depth profile 분석을 통하여 La의 분포를 확인하였으며, HRTEM 분석을 통하여 미세구조분석을 실시하였다.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.22-26
• /
• 2013

PTCR ceramics of $(Ba_{0.998}Sm_{0.002})TiO_3+0.001MnCO_3+xSiO_2$ (x=1, 2, 3, 4, 5, 6 mol%) were fabricated by solid state method. Disk samples of diameter 5 mm and thickness about 1mm were sintered at $1,290^{\circ}C$ for 2 h in reduced atmosphere of $5%H_2-95%N_2$ followed by re-oxidation at $600^{\circ}C$ for 30 min. in $20%O_2-80%N_2$.and their microstructures and electrical properties were investigated with SEM and Multimeter. The color of sintered samples was strongly dependent on $SiO_2$ content showing that the color of samples with $SiO_2$ of 1~2 mol% was gray but that of samples with $SiO_2$ of 4~6 mol% was changed from gray to blue, which seems to be related with the reduction of samples due to the oxygen vacancies created during the sintering in reduced atmosphere. $SiO_2$ content had a great influence on the microstructure and the electrical properties. With increasing $SiO_2$ content, the grain size of samples increased and the resistivity as well as the resistivity jump ($R_{285}/R_{min}$) decreased, which is considered to be attributed to the resistivity change at grain interior and grain boundary due to the fast mass transfer through $SiO_2$ liquide phase during the sintering. Samples with 2 mol% $SiO_2$ has the resistivity of $202{\Omega}cm$ and the resistivity jump of 3.28. It is expected that $SiO_2$ doped $BaTiO_3$ based PTC ceramics can be used for multilayered PTC thermistor due to the resistance to the sintering in reduced atmosphere.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1050-1054
• /
• 1990

Rutile(TiO2) single crystals were grown by FZ method. Feed rod was sintered in the longitudinal tube-shaped furnace at 135$0^{\circ}C$ and optimum growth condition was growth rate 5-8mm/hr, rotation rate 30-40rpm. When crystal was growing, atomosphere was oxidized condition, and grown single crystal was annealed at 110$0^{\circ}C$. The rutile single crystals were oriented to [001] direction and color change of single crystals were related to atmosphere, and difference of electric conductivity and resistance was due to the fact above.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.65-66
• /
• 2006

[ $TiO_2$ ] single crystalline nanorods are prepared from electrospun fibers which are composed of nanofibrils with an island-in-a-sea morphology. The mechanical pressure produces each fibril into nanorods which are converted to anatase single crystals after calcinations. HRTEM shows that the (001) plane is growing along the longitudinal direction of the rod. In this work, the nanorod electrode provides the efficient photocurrent generation in a quasi-solid state dye-sensitized solar cells (DSSCs) using highly viscous PVDF-HFP based gel electrolytes. The overall converision efficiency of the $TiO_2$ nanorods shows 6.2 % under $100\;mW/cm^2$ (AM 1.5G) illumination.