• Title/Summary/Keyword: $TiH_2$

Search Result 2,087, Processing Time 0.031 seconds

Rapid Synthesis and Consolidation of Nanostructured Ti-TiC Composites from TiH2 and CNT by Pulsed Current Activated Heating

  • Park, Na-Ra;Shon, In-Jin
    • Korean Journal of Materials Research
    • /
    • v.25 no.1
    • /
    • pp.48-53
    • /
    • 2015
  • $TiH_2$ nanopowder was made by high energy ball milling. The milled $TiH_2$ and CNT powders were then simultaneously synthesized and consolidated using pulsed current activated sintering (PCAS) within one minute under an applied pressure of 80 MPa. The milling did not induce any reaction between the constituent powders. Meanwhile, PCAS of the $TiH_2$-CNT mixture produced a Ti-TiC composite according to the reaction ($0.92TiH_2+0.08CNT{\rightarrow}0.84Ti+0.08TiC+0.92H_2$, $0.84TiH_2+0.16CNT{\rightarrow}0.68Ti+0.16TiC+0.84H_2$). Highly dense nanocrystalline Ti-TiC composites with a relative density of up to 99.7% were obtained. The hardness and fracture toughness of the dense Ti-8 mole% TiC and Ti-16 mole% TiC produced by PCAS were also investigated. The hardness of the Ti-8 mole% TiC and Ti-16 mole% TiC composites was higher than that of Ti. The hardness value of the Ti-16 mole% TiC composite was higher than that of the Ti-8 mole% TiC composite without a decrease in fracture toughness.

Photovoltaic Effects of the p$\cdot$Si-Electrolyte Junction (p$\cdot$Si-전해질 접합의 광기전력 효과)

  • Han, Seok-Yong;Kim, Yeon-Hui;Kim, Hwa-Taek
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.19 no.6
    • /
    • pp.52-54
    • /
    • 1982
  • p·Si-전해질 접합을 전해질로 6N H2SO4, 6N H2SO4(Ti3+), 6N H2SO4(Ti4+), 6N H2SO4(Ti4+/Ti3+)을 사용하여 만들었다. 이들 전해질중 6N H2SO4(Ti4-/Ti3+)을 사용할 때 p·Si 광음극이 안정하게 동학하며 높은 광전 감도를 가지고 있었다. p·Si-electrolyte junction are prepared by using p·Si photocatode in four different electrolytes such as 6N H2SO4, 6N H2SO4(Ti3+), 6N H2SO4(Ti4+), 6N H2SO4(Ti4+/Ti3+) respectively. Among those electrolytes 6N H2SO4(Ti4-/Ti3+) shows very good results, in which p·Si photocathode is stable.

  • PDF

Development of Pd/TiO2 Catalysts with La2O3 Addition and Study on the Performance Improvement of H2 Oxidation at Room Temperature (La2O3가 첨가된 Pd/TiO2 촉매의 개발 및 H2 상온산화 반응에서의 성능 향상 연구)

  • Lee, Dong Yoon;Kim, Sung Chul;Lee, Sang Moon;Kim, Sung Su
    • Applied Chemistry for Engineering
    • /
    • v.31 no.6
    • /
    • pp.674-678
    • /
    • 2020
  • In this study, a Pd/TiO2 catalyst which oxidized H2 at room temperature without an additional energy source was prepared. And a specific surface area of TiO2 as a support was not proportional to H2 oxidation reaction performance of Pd/TiO2 catalyst. In addition La2O3 was added to Pd/TiO2 catalyst in order to evaluate the performance effect due to the change of catalysts physical properties. A Pd/La2O3-TiO2 was prepared by adding different amounts of La2O3 to TiO2 and CO chemisorption analysis was performed. Compared to the conversion rate (14% at 0.5% H2) of the Pd/TiO2(G) catalyst, the Pd/La2O3-TiO2 catalyst showed 74% which was improved by more than five times. It was found that the larger the metal dispersion of Pd as an active metal is, the more favorable to H2 oxidation reaction is. However, when the added La2O3 amount exceeded 10%, the catalyst performance decreased again. Finally, it was concluded that the physical properties of the Pd/La2O3-TiO2 catalyst have a dominant influence on the catalytic activity until 0.3~0.5% of injected H2 concentrations and the catalyst reaction rate was controlled by substance transfer from 1% or more concentrations of H2.

Synthesis of NiTi Alloy Powder by the Reaction of NiO-TiH2 Mixing Powders (NiO-TiH2 혼합분말의 반응을 이용한 NiTi 합금분말 제조)

  • Jeon, Ki Cheol;Lee, Han-Eol;Yim, Da-Mi;Oh, Sung-Tag
    • Journal of Powder Materials
    • /
    • v.22 no.4
    • /
    • pp.266-270
    • /
    • 2015
  • The synthesis of NiTi alloy powders by hydrogen reduction and dehydrogenation process of NiO and $TiH_2$ powder mixtures is investigated. Mixtures of NiO and $TiH_2$ powders are prepared by simple mixing for 1 h or ball milling for 24 h. Simple-mixed mixture shows that fine NiO particles are homogeneously coated on the surface of $TiH_2$ powders, whereas ball milled one exhibits the morphology with mixing of fine NiO and $TiH_2$ particles. Thermogravimetric analysis in hydrogen atmosphere reveals that the NiO and $TiH_2$ phase are changed to metallic Ni and Ti in the temperature range of 260 to $290^{\circ}C$ and 553 to $639^{\circ}C$, respectively. In the simple-mixed powders by heat-up to $700^{\circ}C$, agglomerates with solid particles and solidified liquid phase are observed, and the size of agglomerates is increased at $1000^{\circ}C$. From the XRD analysis, the presence of liquid phase is explained by the formation and melting of $NiTi_2$ inter-metallic compound due to an exothermic reaction between Ni and Ti. The simple-mixed powders, heated to $1000^{\circ}C$, lead to the formation of NiTi phase but additional Ni-, Ti-rich and Ti-oxide phases. In contrast, the microstructure of ball-milled powders is characterized by the neck-grown particles, forming $Ni_3Ti$, Ti-oxide and unreacted Ni phase.

Preparation of Ti−TiH2−C−N2Powder by Combustion Reaction in the System of TiC0.7N0.3 (Ti−TiH2−C−N2계에서 연소반응에 의한 TiC0.7N0.3 분말의 제조)

  • Shin, Chang-Yun;Nersisyan, Hayk;Won, Chang-Whan
    • Journal of the Korean Ceramic Society
    • /
    • v.44 no.1 s.296
    • /
    • pp.37-42
    • /
    • 2007
  • The preparation of $TiC_{0.7}N_{0.3}$ powder by SHS in the system of $Ti-TiH_2-C$ ($N_2$ atmosphere) was investigated in this study. In the preparation of $TiC_{0.7}N_{0.3}$ powder, the effect of gas pressure, compositions such as Ti, $TiH_2$, C, and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $TiC_{0.7}N_{0.3}$ was $0.75Ti+0.25TiH_2+0.7C+0.5NaCl$. The $TiC_{0.7}N_{0.3}$ powder synthesized in this condition was a single phase with irregular shape.

Fabrication of $TiH_2$ Powders from Titanium Tuning Chip by Mechanical Milling

  • Jang, Jin-Man;Lee, Won-Sik;Ko, Se-Hyun
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.969-970
    • /
    • 2006
  • In present work, manufacturing technologies of titanium hydride powder were studied for recycling of titanium tuning chip and for this, attrition ball milling was carried out under $H_2$ pressure of 0.5 MPa. Ti chips were completely transformed into $TiH_2$ within several hundred seconds. Dehydrogenation process $TiH_2$ powders is consist of two reactions: one is reaction of $TiH_2$ to $TiH_x$ and the other decomposition of $TiH_x$ to Ti and $H_2$. The former reaction shows relatively low activation energy and it is suggested that the reaction is caused by introduction of defects due to milling.

  • PDF

Sintering of $\textrm{TiH}_2$ Powders ($\textrm{TiH}_2$ 분말의 소결)

  • Kim, Won-Baek;Choi, Good-Sun;Suh, Chang-Youl;Kil, Dae-Sup;Ha, Ho
    • Korean Journal of Materials Research
    • /
    • v.9 no.3
    • /
    • pp.282-289
    • /
    • 1999
  • 티타늄 수소화물(TiH$_2$) 분말을 원료로 사용하여 Ti 소결체를 제조하였다. 원료분말은 수소화-탈수소화법(HDH법)에 의해 제조한 상용분말이었으며 비교를 위해 동일한 입도를 갖는 Ti 분말도 함께 소결하였다. $TiH_2$는 소결체의 밀도를 현저하게 촉진하였으며 $TiH_2$$\longrightarrow$$Ti+H_2$의 탈수소반응에 의해 생성되 청정한 Ti분말이 소결을 촉진하기 때문인 것으로 판단된다. 같은 이유로 $TiH_2$소결체의 산소농도는 Ti 소결체보다 낮게 나타났다. 소결체의 잔류수소는 소결온도가 증가함에 따라 감소하였으며 $1200^{\circ}C$ 이상에서는 5 ppm 이하의 낮은 값을 나타냈다. 소결체의 경도는 소결밀도 및 산소량에 비례하는 것으로 나타났다. $TiH_2$분말의 cubic$\longrightarrow$tetragonal 변태온도는 X-선 회절분석 결과 $16~20^{\circ}C$ 구간으로 밝혀졌다.

  • PDF

Fabrication of Porous Titanium Parts by Direct Laser Melting of Ti-TiH2 Mixing Powder (Ti-TiH2 혼합 분말의 레이저 직접 용융 공정을 이용한 다공성 티타 늄 부품 제조 연구)

  • Yun, H.J.;Seo, D.M.;Woo, Y.Y.;Moon, Y.H.
    • Transactions of Materials Processing
    • /
    • v.28 no.1
    • /
    • pp.21-26
    • /
    • 2019
  • Direct Laser Melting (DLM) of $Ti-xTiH_2$ (mixing ratio x = 2, 5, 10 wt.%) blended powder is characterized by producing porous titanium parts. When a high energy laser is irradiated on a $Ti-TiH_2$ blended powder, hydrogen gas ($H_2$) is produced by the accompanying decomposition of the $TiH_2$ powder, and acts as a pore-forming and activator. The hydrogen gas trapped in a rapidly solidified molten pool, which generates porosity in the deposited layer. In this study, the effects of a $TiH_2$ mixing ratio and the associated processing parameters on the development of a porous titanium were investigated. It was determined that as the content of $TiH_2$ increases, the resulting porosity density also increases, due to the increase of $H_2$ produced by $TiH_2$. Also, porosity increases as the scan speed increases. As fast solidified melting pools do not provide enough time for $H_2$ to escape, the faster the scan speed, the more the resulting $H_2$ is captured by the process. The results of this study show that the mixing ratio (x) and laser machining parameters can be adjusted to actively generate and control the porosity of the DLM parts.

The Characteristic and Formation of Ti(B,N) Films on Steel by EA Hot Filament CVD (EA hot filament CVD system을 이용하여 금형공구강에 증착한 Ti(B,N)박막의 합성과 특성에 관하여)

  • Yoon, Jung-H.;Choi, Yong;Choe, Jean-I.
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.61 no.4
    • /
    • pp.585-589
    • /
    • 2012
  • The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

Reaction Mechanism on the Synthesis of $SrTiO_3$ by Direct Wet Process ($SrTiO_3$ 습식 직접 합성 반응기구에 관한 연구)

  • 이경희;이병하;김대웅
    • Journal of the Korean Ceramic Society
    • /
    • v.23 no.6
    • /
    • pp.45-51
    • /
    • 1986
  • $SrTiO_3$ reaction mechanism formed from $TiCl_4$ and $SrCl_2$ solution by direct-wet-process was studied. Through this study it is identified that crystalline $SrTiO_3$ is formed above pH 13.8 amorphous $SrTiO_3$ above pH7 and crystallization temperature of amorphous $SrTiO_3$ is at 37$0^{\circ}C$. the final products are composed of 60% crystalline $SrTiO_3$ and 40% amorphous $SrTiO_3$ The amorphous $SrTiO_3$ is identified with the IR absorption spectrum of Sr-Ti-O by FT-IR spectrometer. Under pH 7 gelationus metatitanate (H2TiO3) is formed from TiCl4 but above pH7 the activity by the formation of metatitnic acid ion $[TiO_3]^{2-}$ is so high that $SrTiO_3$is formed more easily through the reaction with $Sr^{2+}$.

  • PDF