• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.109-116
• /
• 1998

In this work was produced and analyzed a z-cut Ti:LiNbO$_{3}$ optical waveguide which applies for various optical devices.A waveguide channel with a thickness 8 .mu.m and a length 66,000.mu.m and a mach-zehnder interferometer type waveguide were fabricated at a diffusion temperature 1050.deg. C for 6-8hours in a wet $O_{2}$ environment. The resulting Ti:LiNbO$_{3}$ optical waveguide was measured to have a Ti-strip thickness of 950.angs. and low loss. Surfaces and cross-sections of a fabricated waveguide were analysed. The mode pattern anaysis revealed that the waveguide showed a single mode at a 1550nm wavelength. The effective dimension of the waveguide was calculated by measuring a gaussian profile; Wx=10.95.mu. and Wy=9.14.mu.m. a propagation loss, of 0.50dB/cm for a TM mode and 0.45dB/cm for a TE mode, was low enough to be accepatable for optical devices.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.400-406
• /
• 1998

We investigated the preparation and guided-mode properties of $Ti:LiNbO_3$ waveguides which were fabricated by Ti in-diffusion. The diffusion method to reduce the Li out-diffusion was proposed. The optical guided-mode and propagation loss based on butt-coupling pigtailed with PMF-input were measured. How to improve the polishing grade of waveguide endfaces is newly proposed in this paper. To show the mode propagations, the BPM simulations of channel waveguide are described.

• 한국광학회지
• /
• 제17권5호
• /
• pp.430-436
• /
• 2006

1550nm 파장대역에서 편광에 관계없이 동작하는 $Ti:LiNbO_3\;2{\times}2$ 삽입/분기 광 멀티플렉서를 구현하였다. 소자는 두 개의 입 출력 광도파로, 두 개의 편광모드분리기, 두 개의 편광모드 변환기 그리고 전기광학효과로 파장을 가변시킬 수 있는 전극으로 구성되었다. TE, TM 편광에 대해서 단일모드 특성을 갖는 채널 광도파로는 x-cut $LiNbO_3$에 Ti 확산 방법으로 제작하였으며, 채널 광도파로 위에 배열된 $SiO_2$ 패드의 전단 스트레인을 이용하여 위상정합 편광모드변환기를 구현하였다. 한편 전기광학효과를 이용하여 파장을 가변시키기 위해서 전압을 인가하여 광도파로의 복 굴절률을 변화시켰다. 0.094nm/V 파장가변률과 최대 17nm 파장을 가변시켰으며, 8.2dB 부 모드레벨과 3.72nm FWHM을 측정하였다.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.72-78
• /
• 1998

Polarization mode converters have been produced by utilizing Ti:LiNbO$_{3}$ channel waveguide and strain-optic effect. Shear strain for periodic perturbations of optical channel waveguides and phase matching can be obtained by an evaporated periodic SiO$_{2}$ thin film at 300.deg. C. The electrodes located on the either side of waveguide provide a means to electro-optically tune the wavelength for maximum polarization conversion via the electrooptic effect. The maximum conversion effeciency was observed at 21.deg. C for V=0 and 46.deg. C for V=30V aro the device having 7 .mu.m waveguide wiith and 350 periodic pads. The dependence of the number of pads on conversion efficiency was observed experimentally.fficiency was observed experimentally.

• 한국통신학회논문지
• /
• 제19권9호
• /
• pp.1782-1792
• /
• 1994

$Ti:LiNbO_3$채널형 광도파로와 Asymmetric Coplanar Strip(ACPS) 전극구조를 이용해서, $1.3{\mu}m$에서 동작하는 진형파형 위상 광변조기를 설계, 제작한 다음 변조특성을 관찰하였다. 위상정합이 개선되도록 ACPS 진행파형 전극을 설계하기 위해서 전극과 완충박막의 두께를 포함하여, 전극제원의 해석적 함수로 특성저항, 변조파의 유효굴절률 및 전극손실 등을 고려하였다. Ti 확산방법으로 저손실 채널형 광도파로 제작하였으며, double-spin image reversal 공정을 이용해서 $2.5{\mu}m$ 두께의 전극을 형성하였다. 9GHz 부근에서의 전극구조 공진형상 때문에 변조특성이 제한 되었지만, 2.5GHz 까지는 큰 왜곡없이 변조특성이 관찰되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.268-269
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.101-104
• /
• 1998

We report some methods for measuring a LiNbO$_3$ optical phase modulator bandwidth. Since Mach-Zehnder waveguide type, one of methods for modulation bandwidth measurement, is comparatively simple and useful, it was adapted in this work. In order to confirm this method, the waveguide of single and Mach-Zehnder type were fabricated on the same wafer. The Mach-Zehnder interferometric waveguide and the single channel waveguide were used for the measurement of the phase modulator's driving voltage and bandwidth for device fabrications, respectively. Ti-860$\AA$ in-diffusion was achieved in a wet-bubbling oxygen environment at 105$0^{\circ}C$/8hours. LINbO$_3$ internal chips were pigtailed to PMF(polarization maintaining fiber)/SMF(single mode fiber) using an epoxy curing technique. Examined were optical properties such as an insertion loss, propagation loss and mode size, and the loss mechanism of optical coupling between an optical fiber and a waveguide was considered.

• 한국재료학회지
• /
• 제12권4호
• /
• pp.254-258
• /
• 2002

To realize channel cross-connecting in optical communications systems, a high speed optical matrix switch was fabricated using z-cut $LiNbO_3$. For switch fabrication was design bending structure and coupling length and four $2{\times}2$ directional couplers were integrated on one substrate far construction of a $4{\times}4$ switch. Single-mode optical waveguides were formed by Ti-diffusion at a wet $O_2$ atmosphere. Ti-diffusion profile, refractive index variation and waveguide morphology were analyzed by Prism coupler and optical microscopy, respectively.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.256-257
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.321-322
• /
• 2006